- Practice
- About 15 min
- 5 practice questions
Rate of a reaction: average, instantaneous and stoichiometry
Define the rate of a reaction and its units, write the rate in terms of every reactant and product of a balanced equation, and tell average rate from instantaneous and initial rate.
If something looks wrong, please tell us.
By the end of this lesson you can
- Define chemical kinetics and the rate of a reaction, with its units.
- Explain the minus sign for reactants and divide by stoichiometric coefficients to get one rate for the whole reaction.
- Calculate an average rate from concentration-time data.
- Explain instantaneous rate and initial rate as slopes of tangents.
Thermodynamics (Class XI) tells us whether a reaction can happen, but not how fast. Mixing barium chloride with dilute sulphuric acid gives a white precipitate of BaSO₄ at once, while iron takes years to rust. Chemical kinetics (from the Greek 'kinesis', movement) is the study of the rate and mechanism of reactions under given conditions of temperature, pressure and concentration. It helps industry choose the best conditions for manufacturing and synthesis.
What is a rate?
A rate is a change per unit time: velocity is change in displacement per second. For a reaction A → B, the rate is the change in concentration of a reactant or product per unit time. If [A] is [A]₁ at time t₁ and [A]₂ at a later time t₂:
Rate = −([A]₂ − [A]₁)/(t₂ − t₁) = −Δ[A]/Δt = +Δ[B]/Δt
Because [A] falls, Δ[A] is negative; the minus sign makes the rate positive, as rates are always reported. Products increase, so no minus sign is needed for them. With concentration in mol L⁻¹ and time in seconds, the unit of rate is mol L⁻¹ s⁻¹; minutes, hours or years may be used for slower reactions. For gases, partial pressures may be used, giving atm s⁻¹.
Rate and stoichiometry
For A → 2B, two moles of B appear for each mole of A used, so B forms twice as fast as A disappears. To get a single rate for the reaction, divide each rate of change by its coefficient in the balanced equation.
For xA + yB → lC + mD: Rate = −(1/x) d[A]/dt = −(1/y) d[B]/dt = +(1/l) d[C]/dt = +(1/m) d[D]/dt
Worked example 1: oxidation of ammonia
4NH₃(g) + 5O₂(g) → 4NO(g) + 6H₂O(g). Check balance: N 4 = 4; H 12 = 12; O 10 = 4 + 6. At one instant NO forms at 3.6 × 10⁻³ mol L⁻¹ s⁻¹. Working: rate of reaction = (1/4) d[NO]/dt = 3.6 × 10⁻³ ÷ 4 = 9.0 × 10⁻⁴ mol L⁻¹ s⁻¹. Then −d[NH₃]/dt = 4 × 9.0 × 10⁻⁴ = 3.6 × 10⁻³; −d[O₂]/dt = 5 × 9.0 × 10⁻⁴ = 4.5 × 10⁻³; d[H₂O]/dt = 6 × 9.0 × 10⁻⁴ = 5.4 × 10⁻³ mol L⁻¹ s⁻¹.
Worked example 2: oxidation of nitric oxide
2NO(g) + O₂(g) → 2NO₂(g). Rate = −(1/2) d[NO]/dt = −d[O₂]/dt = (1/2) d[NO₂]/dt. If [O₂] is falling at 0.15 mol L⁻¹ s⁻¹, then d[NO₂]/dt = 2 × 0.15 = 0.30 mol L⁻¹ s⁻¹.
Average and instantaneous rate
The textbook follows the isomerisation of cyclopropane to propene at 780 K; its concentration falls quickly at first and more slowly later. The made-up data below show the same behaviour for a reactant A.
| Time (s) | [A] (mol L⁻¹) |
|---|---|
| 0 | 0.800 |
| 20 | 0.700 |
| 40 | 0.620 |
| 60 | 0.550 |
| 80 | 0.490 |
Worked example 3: average rates
Over the whole 80 s: rate = −(0.490 − 0.800) ÷ (80 − 0) = 0.310 ÷ 80 = 3.9 × 10⁻³ mol L⁻¹ s⁻¹. Over the first 20 s: −(0.700 − 0.800) ÷ 20 = 0.100 ÷ 20 = 5.0 × 10⁻³. Over the last 20 s: −(0.490 − 0.550) ÷ 20 = 0.060 ÷ 20 = 3.0 × 10⁻³ mol L⁻¹ s⁻¹. The rate falls as A is used up, so an average over a long interval does not tell you the rate at any one moment.
The rate at a particular moment is the instantaneous rate. The shorter the interval Δt, the closer the average rate comes to it: as Δt → 0, −Δ[A]/Δt becomes −d[A]/dt. On a graph of [A] against t it is the (negative of the) slope of the tangent at that time. The instantaneous rate at t = 0, just as the reactants are mixed, is the initial rate.
From average rate to instantaneous rate
- Average rate −Δ[A]/Δt over a long interval
- Shorter interval Average comes closer to the true rate
- Δt → 0 −d[A]/dt
- Slope of tangent Instantaneous rate at time t (initial rate at t = 0)
Key takeaways: rate = −Δ[reactant]/Δt = +Δ[product]/Δt, in mol L⁻¹ s⁻¹. Divide by coefficients to get one rate for the reaction. Rates usually fall with time; the instantaneous rate is the slope of a tangent, and the initial rate is that slope at t = 0.
Check your understanding
-
1. For 2N₂O₅(g) → 4NO₂(g) + O₂(g), which expression equals the rate of the reaction?
- −d[N₂O₅]/dt = d[NO₂]/dt = d[O₂]/dt
- −2 d[N₂O₅]/dt = 4 d[NO₂]/dt = d[O₂]/dt
- d[O₂]/dt = −(1/2) d[N₂O₅]/dt = (1/4) d[NO₂]/dt
- −(1/4) d[N₂O₅]/dt = (1/2) d[NO₂]/dt = d[O₂]/dt
Show answer
Answer: C. Divide each rate of change by its coefficient, with a minus sign for the reactant: −(1/2)d[N₂O₅]/dt = (1/4)d[NO₂]/dt = (1/1)d[O₂]/dt.
-
2. In N₂ + 3H₂ → 2NH₃, hydrogen is used up at 0.060 mol L⁻¹ s⁻¹. At what rate is ammonia formed?
- 0.040 mol L⁻¹ s⁻¹
- 0.090 mol L⁻¹ s⁻¹
- 0.020 mol L⁻¹ s⁻¹
- 0.060 mol L⁻¹ s⁻¹
Show answer
Answer: A. Rate = −(1/3)d[H₂]/dt = (1/2)d[NH₃]/dt. So d[NH₃]/dt = (2/3) × 0.060 = 0.040 mol L⁻¹ s⁻¹.
-
3. [A] falls from 0.50 mol L⁻¹ to 0.38 mol L⁻¹ in 4.0 minutes. What is the average rate of disappearance of A?
- 0.12 mol L⁻¹ min⁻¹
- 0.095 mol L⁻¹ min⁻¹
- 0.48 mol L⁻¹ min⁻¹
- 0.030 mol L⁻¹ min⁻¹
Show answer
Answer: D. Rate = −Δ[A]/Δt = −(0.38 − 0.50) ÷ 4.0 = 0.12 ÷ 4.0 = 0.030 mol L⁻¹ min⁻¹.
-
4. How is the instantaneous rate at time t found from a graph of [reactant] against time?
- From the area under the curve up to t
- From the negative of the slope of the tangent to the curve at t
- By dividing the concentration at t by t
- From the slope of the straight line joining t = 0 and t
Show answer
Answer: B. The instantaneous rate is −d[A]/dt, which is the negative of the slope of the tangent at that point. The line joining two points gives only an average rate.
-
5. What is the unit of the rate of a gas-phase reaction when concentrations are expressed as partial pressures and time in seconds?
- atm⁻¹ s⁻¹
- s⁻¹
- atm s⁻¹
- mol L⁻¹ s⁻¹
Show answer
Answer: C. Rate = change in 'concentration' ÷ time. If concentration is measured as pressure (atm) and time in s, the unit is atm s⁻¹.
Sign in to keep track of the lessons you finish.