• Practice
  • About 18 min
  • 5 practice questions

Integrated rate laws: first order, pseudo first order and zero order

Derive and use the integrated rate equations for first-order and zero-order reactions, recognise them from straight-line graphs, and explain pseudo first-order reactions.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Integrate the first-order rate law to get k = (2.303/t) log([A]₀/[A]).
  • Calculate concentration after a time, or the time for a given change, for first-order reactions.
  • Explain pseudo first-order reactions with ester hydrolysis.
  • Derive [A] = [A]₀ − kt for zero order and give examples of zero-order reactions.

The rate law −d[A]/dt = k[A]ˣ gives the rate at an instant, but it cannot directly answer 'how much is left after 10 minutes?' or 'how long until half is used?'. For that we integrate it to get an equation containing time.

First-order reactions

For A → product with Rate = k[A]: −d[A]/dt = k[A], so −d[A]/[A] = k dt. Integrate from [A]₀ at t = 0 to [A] at time t: −(ln[A] − ln[A]₀) = k(t − 0), i.e. ln([A]₀/[A]) = kt. Converting to base-10 logarithms (ln x = 2.303 log x):

k = (2.303/t) log([A]₀/[A]); equivalently ln[A] = ln[A]₀ − kt.

— Integrated rate law, first order

The second form is y = c + mx: a plot of ln[A] against t is a straight line of slope −k and intercept ln[A]₀. Examples given in the textbook: decomposition of N₂O₅ (N₂O₅ → 2NO₂ + ½O₂), decomposition of SO₂Cl₂ (SO₂Cl₂ → SO₂ + Cl₂), decomposition of H₂O₂ in solution (H₂O₂ → H₂O + ½O₂) and isomerisation of cyclopropane to propene.

Worked example 1: finding k

In a first-order reaction [A] falls from 0.80 to 0.20 mol L⁻¹ in 20 min. Working: k = (2.303/20) log(0.80/0.20) = (2.303/20) × log 4 = (2.303/20) × 0.6021 = 1.3866 ÷ 20 = 0.0693 min⁻¹.

Worked example 2: concentration after a time

[A]₀ = 0.080 mol L⁻¹ and k = 2.0 × 10⁻³ s⁻¹. Find [A] after 500 s. Working: ln([A]₀/[A]) = kt = 2.0 × 10⁻³ × 500 = 1.0. So [A]₀/[A] = e¹ = 2.718 and [A] = 0.080 ÷ 2.718 = 0.0294 mol L⁻¹.

Worked example 3: testing data for first order

Made-up data: t = 0, 10, 20, 30 min; [A] = 0.500, 0.405, 0.328, 0.266 mol L⁻¹. Working: at 10 min k = (2.303/10) log(0.500/0.405) = 0.2303 × 0.0915 = 0.0211 min⁻¹; at 20 min k = (2.303/20) log(0.500/0.328) = 0.11515 × 0.1831 = 0.0211 min⁻¹; at 30 min k = (2.303/30) log(0.500/0.266) = 0.07677 × 0.2741 = 0.0210 min⁻¹. k is constant, so the reaction is first order with k ≈ 0.021 min⁻¹.

Pseudo first-order reactions

Following two changing concentrations at once is difficult. If one reactant is taken in large excess, its concentration hardly changes, and a second-order reaction behaves as first order. Acid hydrolysis of ethyl acetate: CH₃COOC₂H₅ + H₂O → CH₃COOH + C₂H₅OH (in H⁺). Rate = k[CH₃COOC₂H₅][H₂O]; with water in large excess, k[H₂O] = k′ is constant, so Rate = k′[CH₃COOC₂H₅]: a pseudo first-order reaction.

Zero-order reactions

In a zero-order reaction the rate does not depend on concentration over a wide range: −d[A]/dt = k[A]⁰ = k. Integrating, −([A] − [A]₀) = kt, so [A] = [A]₀ − kt and k = ([A]₀ − [A])/t. A plot of [A] against t is a straight line of slope −k and intercept [A]₀. Such reactions are rare. Examples: the photochemical reaction H₂ + Cl₂ → 2HCl (in light); decomposition of N₂O on hot platinum, N₂O → N₂ + ½O₂; and the acid-catalysed iodination of acetone, CH₃COCH₃ + I₂ → ICH₂COCH₃ + HI, which is zero order in iodine (Rate = k[CH₃COCH₃][H⁺]).

Worked example 4: a zero-order reaction

[A]₀ = 0.60 mol L⁻¹, k = 0.012 mol L⁻¹ min⁻¹. After 20 min: [A] = 0.60 − 0.012 × 20 = 0.60 − 0.24 = 0.36 mol L⁻¹. Time to use all of A: t = [A]₀/k = 0.60 ÷ 0.012 = 50 min; unlike a first-order reaction, a zero-order reaction does finish in a definite time.

Zero order and first order

  • Zero order
    • −d[A]/dt = k
    • [A] = [A]₀ − kt
    • Straight line: [A] against t, slope −k
    • Unit of k: mol L⁻¹ s⁻¹
  • First order
    • −d[A]/dt = k[A]
    • ln[A] = ln[A]₀ − kt
    • Straight line: ln[A] against t, slope −k
    • Unit of k: s⁻¹

For an nth-order reaction with one reactant (n ≠ 1) the integrated law is 1/[A]ⁿ⁻¹ − 1/[A]₀ⁿ⁻¹ = (n − 1)kt.

Key takeaways: first order: k = (2.303/t) log([A]₀/[A]), ln[A] against t is linear. Zero order: [A] = [A]₀ − kt, [A] against t is linear. A large excess of one reactant makes a reaction pseudo first order.

Check your understanding

  1. 1. For a first-order reaction A → B with k = y s⁻¹ and [A]₀ = 0.05 M, what is [A] after 10 minutes?

    1. 0.05 e^(−10y)
    2. 0.05 e^(−600y)
    3. 0.05(1 − e^(−600y))
    4. 0.05 e^(600y)
    Show answer

    Answer: B. [A] = [A]₀e^(−kt). k is in s⁻¹, so t must be in seconds: 10 min = 600 s. [A] = 0.05 e^(−600y) M.

  2. 2. Which plot gives a straight line for a first-order reaction?

    1. [A] against t
    2. 1/[A] against t
    3. ln[A] against t
    4. Rate against t
    Show answer

    Answer: C. ln[A] = ln[A]₀ − kt has the form y = c + mx with y = ln[A] and x = t, so ln[A] against t is a straight line of slope −k.

  3. 3. Acid hydrolysis of an ester in a large excess of water follows first-order kinetics because

    1. the concentration of water stays almost constant
    2. water does not take part in the reaction
    3. the acid is used up
    4. the ester is in large excess
    Show answer

    Answer: A. The true rate law involves both ester and water, but with water in large excess its concentration hardly changes; k[H₂O] becomes a constant k′, so Rate = k′[ester]: pseudo first order.

  4. 4. A zero-order reaction has k = 0.025 mol L⁻¹ min⁻¹ and [A]₀ = 0.50 mol L⁻¹. What is [A] after 8 min?

    1. 0.20 mol L⁻¹
    2. 0.475 mol L⁻¹
    3. 0.40 mol L⁻¹
    4. 0.30 mol L⁻¹
    Show answer

    Answer: D. [A] = [A]₀ − kt = 0.50 − 0.025 × 8 = 0.50 − 0.20 = 0.30 mol L⁻¹.

  5. 5. The iodination of acetone in acid is zero order with respect to iodine. This means

    1. the rate does not change if [I₂] is doubled
    2. iodine is not consumed
    3. the reaction does not need acid
    4. the rate doubles if [I₂] is doubled
    Show answer

    Answer: A. Zero order in I₂ means [I₂]⁰ = 1 in the rate law, so changing [I₂] does not change the rate; the rate depends on [acetone] and [H⁺]. Iodine is still consumed.

Sign in to keep track of the lessons you finish.

Next lesson → Half-life of a reaction

Privacy · Terms · Refunds · Delivery