- Practice
- About 18 min
- 5 practice questions
Rate law, order of reaction and molecularity
Write rate laws, find the order with respect to each reactant from initial-rate data, give units of the rate constant for any order, and tell order from molecularity using reaction mechanisms.
If something looks wrong, please tell us.
By the end of this lesson you can
- Write a rate law and state partial and overall orders.
- Find orders and the rate constant from initial-rate experiments.
- Work out the unit of k for zero, first, second and fractional orders.
- Define elementary reaction and molecularity, and compare order with molecularity.
Rate law and rate constant
For xA + yB → products, the rate depends on the concentrations as:
Rate = k[A]ᵐ[B]ⁿ. m and n are the orders with respect to A and B; the overall order is m + n. k is the rate constant.
The exponents must be found by experiment; they cannot be read from the balanced equation. For example, halving the concentration of cyclopropane halves the rate of its isomerisation, so its rate law is Rate = k[cyclopropane]¹: first order, even though nothing in the equation says so. Orders can be zero, whole numbers or fractions. For CH₃CHO → CH₄ + CO the experimental law is Rate = k[CH₃CHO]^(3/2), an order of 3/2.
| Rate of reaction | Rate constant k |
|---|---|
| Speed at which reactants turn into products at an instant | A proportionality constant in the rate law |
| Measured as fall in reactant or rise in product concentration per unit time | Equals the rate when every reactant concentration is 1 mol L⁻¹ |
| Changes with concentration (so with time) | Does not depend on concentration; changes with temperature |
Worked example 1: orders from initial rates
Made-up data for A + B → products at a fixed temperature:
| Experiment | [A] (mol L⁻¹) | [B] (mol L⁻¹) | Initial rate (mol L⁻¹ s⁻¹) |
|---|---|---|---|
| 1 | 0.10 | 0.10 | 2.0 × 10⁻⁴ |
| 2 | 0.20 | 0.10 | 8.0 × 10⁻⁴ |
| 3 | 0.10 | 0.30 | 6.0 × 10⁻⁴ |
Rate = k[A]ᵐ[B]ⁿ. Experiment 2 ÷ 1 ([B] fixed): (8.0 × 10⁻⁴)/(2.0 × 10⁻⁴) = (0.20/0.10)ᵐ, so 4 = 2ᵐ and m = 2. Experiment 3 ÷ 1 ([A] fixed): (6.0 × 10⁻⁴)/(2.0 × 10⁻⁴) = (0.30/0.10)ⁿ, so 3 = 3ⁿ and n = 1. Rate law: Rate = k[A]²[B], overall order 3. From experiment 1: k = 2.0 × 10⁻⁴ ÷ [(0.10)²(0.10)] = 2.0 × 10⁻⁴ ÷ 1.0 × 10⁻³ = 0.20 L² mol⁻² s⁻¹. The textbook finds the same pattern for 2NO + O₂ → 2NO₂: Rate = k[NO]²[O₂].
Worked example 2: orders from a known rate law
For 5Br⁻ + BrO₃⁻ + 6H⁺ → 3Br₂ + 3H₂O the experimental law is Rate = k[Br⁻][BrO₃⁻][H⁺]². Check balance: Br 6 = 6; O 3 = 3; H 6 = 6; charge −5 − 1 + 6 = 0 = 0. Orders: 1 in Br⁻, 1 in BrO₃⁻, 2 in H⁺; overall 1 + 1 + 2 = 4, although 12 ions appear on the left. This shows again that order is not taken from coefficients.
Units of the rate constant
From k = Rate/[A]ⁿ, the unit is (mol L⁻¹ s⁻¹)/(mol L⁻¹)ⁿ = (mol L⁻¹)¹⁻ⁿ s⁻¹.
| Overall order n | Unit of k |
|---|---|
| 0 | mol L⁻¹ s⁻¹ |
| 1 | s⁻¹ |
| 2 | L mol⁻¹ s⁻¹ |
| 3 | L² mol⁻² s⁻¹ |
| 3/2 | mol^(−1/2) L^(1/2) s⁻¹ |
So the unit of k reveals the order: k = 3.0 × 10⁻³ s⁻¹ belongs to a first-order reaction; k = 3.0 × 10⁻³ L mol⁻¹ s⁻¹ to a second-order one.
Elementary reactions and molecularity
Most reactions go through a series of simple steps, the mechanism. Each step is an elementary reaction, and the number of reactant species taking part in an elementary step is its molecularity: unimolecular (1), bimolecular (2) or, rarely, termolecular (3). Hydrolysis of tert-butyl bromide (Class XI) is SN1 because its slow, rate-determining step involves only one species.
Worked example 3: decomposition of H₂O₂ catalysed by I⁻
Overall: 2H₂O₂(aq) → 2H₂O(l) + O₂(g). Experimentally, Rate = k[H₂O₂][I⁻]: I⁻ appears in the rate law although not in the equation. Proposed steps: (1) H₂O₂ + I⁻ → H₂O + IO⁻ (slow); (2) H₂O₂ + IO⁻ → H₂O + I⁻ + O₂ (fast). Adding them: IO⁻ and I⁻ cancel, giving 2H₂O₂ → 2H₂O + O₂ (H 4 = 4, O 4 = 2 + 2). The slow step involves one H₂O₂ and one I⁻, so it is bimolecular, and it fixes the rate law. I⁻ is used and regenerated: it is a catalyst.
Order and molecularity
-
Order
- Sum of powers in the experimental rate law
- Can be 0, a fraction or a whole number
- Belongs to the overall reaction
- Found only by experiment
-
Molecularity
- Number of species in one elementary step
- Always a whole number (1, 2, rarely 3), never 0
- Belongs to each step of the mechanism
- Comes from the proposed mechanism
Key takeaways: Rate = k[A]ᵐ[B]ⁿ with m, n from experiment; compare two experiments where only one concentration changes. Unit of k = (mol L⁻¹)¹⁻ⁿ s⁻¹. Molecularity is a whole number for an elementary step; order is for the whole reaction and may be zero or fractional.
Check your understanding
-
1. For X + Y → products, doubling [X] alone multiplies the rate by 2√2 (about 2.83), and doubling both [X] and [Y] multiplies it by 4. What are the orders?
- 1 in X, 1 in Y
- 3/2 in X, 1/2 in Y; overall 2
- 2 in X, 0 in Y
- 3 in X, 1 in Y
Show answer
Answer: B. 2ᵐ = 2√2 = 2^(3/2), so m = 3/2. Then 2ᵐ × 2ⁿ = 4: 2^(3/2) × 2ⁿ = 2², so n = 1/2. Overall order = 3/2 + 1/2 = 2.
-
2. What is the unit of the rate constant for a second-order reaction?
- mol L⁻¹ s⁻¹
- s⁻¹
- L² mol⁻² s⁻¹
- L mol⁻¹ s⁻¹
Show answer
Answer: D. Unit = (mol L⁻¹)¹⁻ⁿ s⁻¹. With n = 2: (mol L⁻¹)⁻¹ s⁻¹ = L mol⁻¹ s⁻¹.
-
3. For Rate = k[A]^(1/2), what are the units of k and of the rate respectively (concentration in mol L⁻¹, time in s)?
- mol^(1/2) L^(−1/2) s⁻¹ and mol L⁻¹ s⁻¹
- mol L⁻¹ s⁻¹ and mol^(1/2) L^(−1/2) s⁻¹
- s⁻¹ and mol L⁻¹ s⁻¹
- mol^(−1/2) L^(1/2) s⁻¹ and mol L⁻¹ s⁻¹
Show answer
Answer: A. The rate is always mol L⁻¹ s⁻¹. For k: (mol L⁻¹)^(1 − 1/2) s⁻¹ = (mol L⁻¹)^(1/2) s⁻¹ = mol^(1/2) L^(−1/2) s⁻¹.
-
4. Which statement about molecularity is correct?
- It can be zero for reactions on catalysts
- It is found only from the overall balanced equation
- It is a whole number and applies to an elementary step
- It is always equal to the overall order
Show answer
Answer: C. Molecularity counts the reacting species in one elementary step, so it is a whole number (1, 2 or 3) and never zero or fractional. Order is experimental and need not equal molecularity.
-
5. For a reaction, Rate = 1.8 × 10⁻³ mol L⁻¹ s⁻¹ when [A] = [B] = 0.30 mol L⁻¹, and k = 6.0 × 10⁻³ s⁻¹. What is the overall order?
- Zero
- One
- Two
- Three
Show answer
Answer: B. The unit of k, s⁻¹, already shows first order. Check: k × (0.30)ⁿ⁺ᵐ = 1.8 × 10⁻³ gives (0.30)ⁿ⁺ᵐ = 0.30, so n + m = 1.
Sign in to keep track of the lessons you finish.