Revision notes

Unit 7 Chemical Kinetics: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Rate of a reaction: average, instantaneous and stoichiometry

Rate = −([A]₂ − [A]₁)/(t₂ − t₁) = −Δ[A]/Δt = +Δ[B]/Δt

For xA + yB → lC + mD: Rate = −(1/x) d[A]/dt = −(1/y) d[B]/dt = +(1/l) d[C]/dt = +(1/m) d[D]/dt

Made-up data for a reaction A → products
Time (s)[A] (mol L⁻¹)
00.800
200.700
400.620
600.550
800.490

From average rate to instantaneous rate

  1. Average rate −Δ[A]/Δt over a long interval
  2. Shorter interval Average comes closer to the true rate
  3. Δt → 0 −d[A]/dt
  4. Slope of tangent Instantaneous rate at time t (initial rate at t = 0)

Key takeaways: rate = −Δ[reactant]/Δt = +Δ[product]/Δt, in mol L⁻¹ s⁻¹. Divide by coefficients to get one rate for the reaction. Rates usually fall with time; the instantaneous rate is the slope of a tangent, and the initial rate is that slope at t = 0.

Read the full lesson

Lesson 2

Rate law, order of reaction and molecularity

Rate = k[A]ᵐ[B]ⁿ. m and n are the orders with respect to A and B; the overall order is m + n. k is the rate constant.

— Rate law
Rate and rate constant
Rate of reactionRate constant k
Speed at which reactants turn into products at an instantA proportionality constant in the rate law
Measured as fall in reactant or rise in product concentration per unit timeEquals the rate when every reactant concentration is 1 mol L⁻¹
Changes with concentration (so with time)Does not depend on concentration; changes with temperature
Initial-rate experiments (made-up data)
Experiment[A] (mol L⁻¹)[B] (mol L⁻¹)Initial rate (mol L⁻¹ s⁻¹)
10.100.102.0 × 10⁻⁴
20.200.108.0 × 10⁻⁴
30.100.306.0 × 10⁻⁴
Units of k
Overall order nUnit of k
0mol L⁻¹ s⁻¹
1s⁻¹
2L mol⁻¹ s⁻¹
3L² mol⁻² s⁻¹
3/2mol^(−1/2) L^(1/2) s⁻¹

Order and molecularity

  • Order
    • Sum of powers in the experimental rate law
    • Can be 0, a fraction or a whole number
    • Belongs to the overall reaction
    • Found only by experiment
  • Molecularity
    • Number of species in one elementary step
    • Always a whole number (1, 2, rarely 3), never 0
    • Belongs to each step of the mechanism
    • Comes from the proposed mechanism

Key takeaways: Rate = k[A]ᵐ[B]ⁿ with m, n from experiment; compare two experiments where only one concentration changes. Unit of k = (mol L⁻¹)¹⁻ⁿ s⁻¹. Molecularity is a whole number for an elementary step; order is for the whole reaction and may be zero or fractional.

Read the full lesson

Lesson 3

Integrated rate laws: first order, pseudo first order and zero order

k = (2.303/t) log([A]₀/[A]); equivalently ln[A] = ln[A]₀ − kt.

— Integrated rate law, first order

Zero order and first order

  • Zero order
    • −d[A]/dt = k
    • [A] = [A]₀ − kt
    • Straight line: [A] against t, slope −k
    • Unit of k: mol L⁻¹ s⁻¹
  • First order
    • −d[A]/dt = k[A]
    • ln[A] = ln[A]₀ − kt
    • Straight line: ln[A] against t, slope −k
    • Unit of k: s⁻¹

Key takeaways: first order: k = (2.303/t) log([A]₀/[A]), ln[A] against t is linear. Zero order: [A] = [A]₀ − kt, [A] against t is linear. A large excess of one reactant makes a reaction pseudo first order.

Read the full lesson

Lesson 4

Half-life of a reaction

First order: t½ = 0.693/k, independent of the initial concentration. Zero order: t½ = [A]₀/2k, directly proportional to [A]₀.

Using half-life to recognise the order
What happens to t½ when [A]₀ is doubledOrder
DoublesZero
Stays the sameFirst
HalvesSecond

First-order decay in half-lives

  1. Start: 100%
  2. After 1 t½: 50%
  3. After 2 t½: 25%
  4. After 3 t½: 12.5%
  5. After 4 t½: 6.25%

Key takeaways: first order t½ = 0.693/k, constant; fraction left after n half-lives = (1/2)ⁿ; 75% done = 2 t½, 87.5% = 3 t½, 99.9% ≈ 10 t½. Zero order t½ = [A]₀/2k grows with [A]₀.

Read the full lesson

Lesson 5

Collision theory, Arrhenius equation and factors affecting rate

Rate = p × e^(−Ea/RT) × Z[A₂][B₂], so k = pZe^(−Ea/RT).

— Collision theory

k = A e^(−Ea/RT); ln k = ln A − (Ea/R)(1/T); log(k₂/k₁) = [Ea/(2.303R)] × [(T₂ − T₁)/(T₁T₂)]

— Arrhenius equation. A = frequency factor, R = 8.314 J K⁻¹ mol⁻¹, T in kelvin

How a catalyst speeds up a reaction

  1. Catalyst offers a new path
  2. Activation energy is lowered
  3. More collisions have energy ≥ Ea
  4. Rate increases; catalyst is regenerated

Key takeaways: only collisions with energy ≥ Ea and proper orientation react: k = pZe^(−Ea/RT). Arrhenius: ln k against 1/T has slope −Ea/R; log(k₂/k₁) = Ea(T₂ − T₁)/(2.303RT₁T₂). Rate rises with concentration, surface area, temperature and a catalyst, which lowers Ea.

Read the full lesson

Privacy · Terms · Refunds · Delivery