Revision notes

Unit 10 Map Projection: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

What a map projection is and why every map is distorted

Properties a projection may preserve or distort

  • Area
    • Regions in true size relative to each other
    • Equal area (homolographic) projections
  • Shape
    • Small shapes look right
    • True shape (orthomorphic) projections
  • Distance (scale)
    • True scale along some lines only
    • Equidistant projections
  • Direction
    • Correct bearings from a centre point
    • A property of zenithal projections from their centre
The four bases of classification
BasisTypes
Method of constructionPerspective; non-perspective
Developable surface usedCylindrical; conical; zenithal (azimuthal)
Projection propertiesEqual area; true shape; true scale (equidistant)
Position of light sourceGnomonic; stereographic; orthographic

Two methods of construction

  • Perspective
    • Shadow of the graticule cast by a light source
    • Geometry of light rays decides positions
    • Gnomonic, stereographic, orthographic
  • Non-perspective
    • Surface assumed to cover the globe
    • Positions calculated mathematically
    • Chosen to keep a property true, such as area or distance

Map projection = a system of drawing the graticule of the globe on a flat surface. No projection keeps shape, area, distance and direction all correct at once.

Key takeaways: a map projection represents the globe's latitudes and longitudes on a flat sheet; the network drawn is the graticule. A sphere is not developable, so every projection distorts shape, area, distance or direction. Projections are classified by method of construction, developable surface, properties and position of the light source. Perspective projections use a shadow; non-perspective ones are calculated.

Read the full lesson

Lesson 2

Developable surfaces and the position of the light source

Cases of cylindrical projection
CaseLine of tangencyExamples named in the chapter
NormalThe equatorEquirectangular, Mercator, Lambert's cylindrical equal area, Gall's stereographic cylindrical, Miller cylindrical
TransverseA meridianCassini, transverse Mercator, transverse cylindrical equal area, modified transverse Mercator
ObliqueAnother great circle at an angleOblique Mercator

Aspects of zenithal projection

  • Polar zenithal
    • Plane tangent at a pole
    • Parallels: concentric circles
    • Meridians: straight radii
  • Equatorial zenithal
    • Plane tangent at a point on the equator
  • Oblique zenithal
    • Plane tangent at a point between a pole and the equator

Three developable surfaces

  • Cylindrical
    • Touches along the equator (normal case)
    • Straight meridians and parallels at right angles
    • Best for equatorial regions
  • Conical
    • Touches along a standard parallel
    • Arcs for parallels, converging straight meridians
    • Best for middle latitudes; one hemisphere
  • Zenithal
    • Touches at one point
    • Circular map; polar case has concentric parallels
    • Best for polar areas
Projections by position of light source
ProjectionPosition of lightEffect
GnomonicAt the centre of the globeRays spread widely, so distortion grows very fast away from the centre; cannot show a whole hemisphere
StereographicOn the surface (periphery) of the globe, diametrically opposite the point where the plane touchesModerate spreading of rays
OrthographicAt infinity, opposite the point of contact, so rays are parallelParallels crowd together towards the edge; looks like a photograph of the globe

Cylinder - equator; cone - middle latitudes; plane - poles. Light at centre = gnomonic; at the opposite surface = stereographic; at infinity = orthographic.

Key takeaways: cylindrical projections give straight meridians and parallels and suit equatorial regions (normal, transverse and oblique cases). Conical projections give arc parallels and converging meridians, suit middle latitudes and show one hemisphere; tangent cones have one standard parallel, secant cones two. Zenithal projections give circular maps and suit polar areas (polar, equatorial and oblique aspects). Gnomonic, stereographic and orthographic projections differ in the position of the light.

Read the full lesson

Lesson 3

Properties of projections: equal area, true shape and true scale

Projection properties
TypeAlso calledWhat is correctTypical use
Equal areaHomolographicThe areas of different parts of the earth are shown correctlyDistribution maps: population, crops, forests
True shapeOrthomorphicThe shapes of small areas are shown correctlyNavigation and weather charts
True scaleEquidistantScale is correct along some parallels or meridiansGeneral-purpose maps and measuring distances along those lines

Length of a parallel on the globe = 2πR cos φ. On a normal cylindrical projection every parallel = 2πR, so east-west scale is stretched by 1/cos φ.

East-west stretch on a normal cylindrical projection
Latitude φcos φ (3 d.p.)Stretch 1/cos φ
0°1.0001 (true scale)
30°0.866about 1.15
45°0.707about 1.41
60°0.5002
90°0infinite: the pole, a point, becomes a line

Two ways of handling the east-west stretch

  • Equal area
    • North-south scale reduced to cancel the stretch
    • Parallels crowd together towards the poles
    • Areas true, shapes flattened at high latitudes
  • True shape
    • North-south scale increased to match the stretch
    • Parallels spread apart towards the poles
    • Small shapes true, areas exaggerated at high latitudes

Key takeaways: equal area (homolographic) projections show areas correctly; true shape (orthomorphic) projections show shapes of small areas correctly; true scale (equidistant) projections keep scale correct along some parallels or meridians only. On a normal cylindrical projection, every parallel is drawn as long as the equator, so the east-west scale is stretched by 1/cos φ; equal area projections compensate by squeezing north-south.

Read the full lesson

Lesson 4

Constructing cylindrical equal area and equidistant projections

The two cylindrical projections side by side

  • Equal area (Lambert, 1772)
    • Parallels at height R sin φ
    • Spacing decreases towards the poles
    • Areas correct, shapes distorted
    • Total height 2R
  • Equidistant (Marinus of Tyre)
    • Parallels equally spaced at 2πR × interval ÷ 360
    • Scale true along all meridians
    • Neither equal area nor orthomorphic
    • Total height πR

Both: equator = 2πR, meridian interval = 2πR × interval ÷ 360. Equal area: parallel at R sin φ from the equator. Equidistant: parallels equally spaced, meridian length = πR.

Key takeaways: in both projections the equator is 2πR long, meridians are equally spaced and all lines are straight and at right angles. In Lambert's equal area projection the parallels lie at R sin φ from the equator, so their spacing shrinks towards the poles and areas are true. In the equidistant projection meridians are half the equator, parallels are equally spaced and scale is true along every meridian; it is used for general maps only.

Read the full lesson

Lesson 5

Constructing polar zenithal equal area and equidistant projections

Radii of parallels for R = 3.5 cm (cm, rounded)
ParallelEqual area: 2R sin((90° - φ)/2)Equidistant: 2πR(90° - φ)/360
60°1.811.83
30°3.503.67
0°4.955.50

Polar zenithal projections compared

  • Equal area (Lambert, 1772)
    • Radius = chord from pole: 2R sin((90° - φ)/2)
    • Circles get closer outwards
    • Areas true; shapes distorted away from centre
    • Political and distribution maps of polar regions
  • Equidistant
    • Radius = arc from pole: 2πR(90° - φ)/360
    • Circles equally spaced
    • Scale true along meridians
    • General-purpose maps of polar areas

Polar zenithal: pole at centre, parallels concentric circles, meridians straight radii. Equal area radius = chord from pole; equidistant radius = arc from pole.

Key takeaways: both polar zenithal projections have the pole as centre, concentric parallel circles and radiating meridians at true angles, with scale along parallels increasing outwards. Lambert's equal area version (1772) uses chords as radii, so the circles crowd outwards and areas are true. The equidistant version uses arcs, so the circles are equally spaced and scale along the meridians is true.

Read the full lesson

Privacy · Terms · Refunds · Delivery