• Practice
  • About 18 min
  • 5 practice questions

Constructing cylindrical equal area and equidistant projections

State the properties of Lambert's cylindrical equal area and the cylindrical equidistant projection, and construct both for the whole globe from a reduced earth radius, with every length calculated.

If something looks wrong, please tell us.

By the end of this lesson you can

  • State the properties of the cylindrical equal area and cylindrical equidistant projections.
  • Calculate the length of the equator, the meridian interval and the spacing of parallels for each.
  • Construct both projections for the whole globe.

These two projections are drawn with a ruler, compasses and a few calculations. Both use a cylinder touching the equator, so both have straight meridians and parallels, and both have the equator at its true length. They differ only in how the parallels are spaced.

Cylindrical equal area projection (Lambert)

This projection was devised by J. H. Lambert in 1772. The chapter describes it as a normal perspective projection on to a cylinder tangent at the equator. Its properties:

  • Parallels and meridians are straight lines that cross at right angles.
  • Meridians are equally spaced, but the distance between parallels decreases towards the poles.
  • The equator has its true length; other parallels are longer than on the globe, so scale is true along the equator and exaggerated along other parallels.
  • The north-south squeeze exactly balances the east-west stretch, so areas are correct, but shapes are badly distorted towards the poles. It suits distribution maps of tropical lands.

In construction, each parallel is placed at a height above the equator equal to R sin φ, the height of that latitude on the globe circle. That is why the textbook's method draws the globe circle, marks the latitude angles on it, and carries those points straight across to the projection.

Worked example 1: cylindrical equal area, R = 2.5 cm, interval 30°

Step 1, equator length = 2πR = 2 × 3.1416 × 2.5 = 15.708 cm, about 15.7 cm. Step 2, meridian interval = 15.708 × 30 ÷ 360 = 1.309 cm, about 1.31 cm, giving 360 ÷ 30 = 12 divisions. Step 3, heights of parallels above (and below) the equator: 30°: 2.5 × sin 30° = 2.5 × 0.5 = 1.25 cm; 60°: 2.5 × 0.866 = 2.165 cm, about 2.17 cm; 90°: 2.5 × 1 = 2.5 cm. Step 4, draw the equator 15.7 cm long, mark the 12 meridian divisions, draw perpendiculars, and draw the parallels at 1.25, 2.17 and 2.5 cm on each side. Check: the spacing between parallels shrinks (1.25, then 0.92, then 0.33 cm), as the property requires. The total height is 2 × 2.5 = 5 cm.

Cylindrical equidistant projection

This projection on to a cylinder tangent at the equator is believed, according to the chapter, to have been invented by Marinus of Tyre around CE 100. Its properties:

  • Meridians are straight, parallel, equally spaced lines, each half as long as the equator; all are the same length and the scale is true along all meridians.
  • Parallels are straight, equally spaced lines perpendicular to the meridians, each equal in length to the equator.
  • The poles are straight lines equal in length to the equator.
  • Scale is true along the equator but exaggerated along other parallels.
  • Parallels and meridians keep the same spacing throughout, forming a grid of equal squares when the intervals are equal.
  • It is neither equal area nor orthomorphic, so it is used for general-purpose maps only.

Worked example 2: cylindrical equidistant, R = 2.5 cm, interval 30°

Step 1, equator length = 2πR = 15.708 cm. Step 2, meridian interval = 15.708 ÷ 12 = 1.309 cm. Step 3, each meridian is half the equator: 15.708 ÷ 2 = 7.854 cm, spanning 180° from pole to pole. Step 4, parallel interval = 7.854 × 30 ÷ 180 = 1.309 cm, the same as the meridian interval, so the grid is made of squares. Step 5, draw the equator, erect perpendiculars 7.854 cm long with half (3.927 cm) on each side of the equator, divide the central meridian into 180 ÷ 30 = 6 equal parts and draw the parallels. Check: 6 × 1.309 = 7.854 cm.

The textbook's examples mark these intervals graphically, stepping off the distance between the 0° and 30° points on the globe circle. That straight-line distance (a chord) is very slightly shorter than the true arc: for R = 2.5 cm the chord of 30° is about 1.29 cm against the arc of 1.31 cm. Calculating 2πR × interval ÷ 360 gives the exact value.

The two cylindrical projections side by side

  • Equal area (Lambert, 1772)
    • Parallels at height R sin φ
    • Spacing decreases towards the poles
    • Areas correct, shapes distorted
    • Total height 2R
  • Equidistant (Marinus of Tyre)
    • Parallels equally spaced at 2πR × interval ÷ 360
    • Scale true along all meridians
    • Neither equal area nor orthomorphic
    • Total height πR

Both: equator = 2πR, meridian interval = 2πR × interval ÷ 360. Equal area: parallel at R sin φ from the equator. Equidistant: parallels equally spaced, meridian length = πR.

Key takeaways: in both projections the equator is 2πR long, meridians are equally spaced and all lines are straight and at right angles. In Lambert's equal area projection the parallels lie at R sin φ from the equator, so their spacing shrinks towards the poles and areas are true. In the equidistant projection meridians are half the equator, parallels are equally spaced and scale is true along every meridian; it is used for general maps only.

Check your understanding

  1. 1. The cylindrical equal area projection was devised by J. H. Lambert in the year:

    1. 1569
    2. 1772
    3. 1885
    4. CE 100
    Show answer

    Answer: B. The chapter states that Lambert devised the cylindrical equal area projection in 1772. CE 100 is linked with Marinus of Tyre and the equidistant projection.

  2. 2. For a reduced earth radius of 3 cm, the length of the equator on a cylindrical projection is about:

    1. 9.42 cm
    2. 6 cm
    3. 28.27 cm
    4. 18.85 cm
    Show answer

    Answer: D. Equator = 2πR = 2 × 3.1416 × 3 = 18.85 cm. 9.42 cm (πR) is the meridian length on the equidistant projection.

  3. 3. On a cylindrical equal area projection with R = 3 cm, the 30° parallel is drawn at what distance from the equator?

    1. 1.5 cm
    2. 1.57 cm
    3. 2.6 cm
    4. 3 cm
    Show answer

    Answer: A. Distance = R sin φ = 3 × sin 30° = 3 × 0.5 = 1.5 cm. 1.57 cm would be the equal spacing of the equidistant projection.

  4. 4. In the cylindrical equidistant projection, each meridian is:

    1. equal in length to the equator
    2. a curve meeting at the poles
    3. half as long as the equator
    4. a quarter of the equator
    Show answer

    Answer: C. A meridian runs 180° from pole to pole, half of the equator's 360°, so its length is πR, half of 2πR.

  5. 5. Why is the cylindrical equidistant projection used for general-purpose maps only?

    1. Because it is neither equal area nor orthomorphic
    2. Because its meridians are curved
    3. Because it shows only one hemisphere
    4. Because its scale is wrong along the equator
    Show answer

    Answer: A. It keeps true scale along the meridians and the equator but preserves neither area nor shape, so it is not suited to distribution or navigation maps.

Privacy · Terms · Refunds · Delivery