• Practice
  • About 18 min
  • 5 practice questions

Constructing polar zenithal equal area and equidistant projections

State the properties of the polar zenithal equal area (Lambert) and polar zenithal equidistant projections, calculate the radius of each parallel, and construct both for a hemisphere.

If something looks wrong, please tell us.

By the end of this lesson you can

  • State the properties of the polar zenithal equal area and polar zenithal equidistant projections.
  • Calculate the radius of each parallel for both projections.
  • Construct both projections for one hemisphere with a given interval.

In a polar zenithal projection the pole is the centre, the parallels are circles around it and the meridians are straight radii. Both projections in this lesson look alike at first glance; they differ only in the radii of the parallel circles, which decide whether areas or distances are true.

Common properties

  • The pole is a point forming the centre of the projection, and the parallels are concentric circles.
  • The meridians are straight lines radiating from the pole, with correct angular distance between them (for a 30° interval, 360 ÷ 30 = 12 radii, 30° apart).
  • Meridians cross parallels at right angles.
  • The scale along the parallels increases away from the centre.

Polar zenithal equal area projection (Lambert)

This projection was devised by J. H. Lambert in 1772 and is also called Lambert's equal area projection. As the scale along the parallels increases away from the centre, the scale along the meridians decreases in the same proportion, so areas stay true. Shapes are therefore distorted away from the centre: compressed along the meridians and stretched along the parallels. It is used for political and distribution maps of polar regions, and also for general maps of large areas of the northern hemisphere.

The radius of each parallel equals the straight-line distance (chord) on the globe from the pole to that parallel: r = 2R sin((90° - φ) ÷ 2). This is why the textbook's construction joins the pole point on the globe circle to the points at each latitude and uses those chords as radii.

Worked example 1: equal area, northern hemisphere, R = 3.5 cm, interval 30°

60° N: r = 2 × 3.5 × sin 15° = 7 × 0.2588 = 1.812 cm. 30° N: r = 7 × sin 30° = 7 × 0.5 = 3.5 cm. 0° (equator): r = 7 × sin 45° = 7 × 0.7071 = 4.950 cm. Construction: mark the pole N; draw circles of radii 1.81, 3.5 and 4.95 cm; draw 12 radii 30° apart with a protractor and label the meridians 0°, 30° E ... 180°, 30° W ... Check: the gaps between circles shrink outwards (1.81, 1.69, 1.45 cm), which is the north-south squeeze that keeps areas true.

Polar zenithal equidistant projection

Here the spacing between the parallels represents true distances, so the scale along the meridians is correct: the distance from the pole to any point is true. The scale along the parallels still increases away from the centre, so areas grow larger outwards. It is used for general-purpose maps of polar areas.

The radius of each parallel equals the arc length on the globe from the pole: r = 2πR × (90° - φ) ÷ 360. The circles are therefore equally spaced. The textbook steps off the chord of the interval on the globe circle, which is very close to this arc; for R = 3.5 cm and 30°, chord 1.81 cm against arc 1.83 cm.

Worked example 2: equidistant, southern hemisphere, R = 3.5 cm, interval 30°

Interval = 2πR × 30 ÷ 360 = 2 × 3.1416 × 3.5 ÷ 12 = 1.833 cm. Radii: 60° S: 1.833 cm; 30° S: 2 × 1.833 = 3.665 cm; equator: 3 × 1.833 = 5.498 cm. Number of circles = 90 ÷ 30 = 3. Construction: mark the South Pole as centre S, draw the three circles, draw 12 radii 30° apart and label the meridians. Check: the equator's radius equals a quarter of the globe's circumference, 2π × 3.5 ÷ 4 = 5.498 cm. For a southern hemisphere map the meridians are numbered in the opposite sense to a northern one, because we view the South Pole from below.

Radii of parallels for R = 3.5 cm (cm, rounded)
ParallelEqual area: 2R sin((90° - φ)/2)Equidistant: 2πR(90° - φ)/360
60°1.811.83
30°3.503.67
0°4.955.50

Polar zenithal projections compared

  • Equal area (Lambert, 1772)
    • Radius = chord from pole: 2R sin((90° - φ)/2)
    • Circles get closer outwards
    • Areas true; shapes distorted away from centre
    • Political and distribution maps of polar regions
  • Equidistant
    • Radius = arc from pole: 2πR(90° - φ)/360
    • Circles equally spaced
    • Scale true along meridians
    • General-purpose maps of polar areas

Polar zenithal: pole at centre, parallels concentric circles, meridians straight radii. Equal area radius = chord from pole; equidistant radius = arc from pole.

Key takeaways: both polar zenithal projections have the pole as centre, concentric parallel circles and radiating meridians at true angles, with scale along parallels increasing outwards. Lambert's equal area version (1772) uses chords as radii, so the circles crowd outwards and areas are true. The equidistant version uses arcs, so the circles are equally spaced and scale along the meridians is true.

Check your understanding

  1. 1. In a polar zenithal projection, the parallels appear as:

    1. straight lines
    2. concentric circles centred on the pole
    3. arcs meeting at the equator
    4. ellipses
    Show answer

    Answer: B. The pole is the centre of the projection and the parallels are concentric circles around it; the meridians are straight radii.

  2. 2. In the polar zenithal equidistant projection, which scale is correct?

    1. Scale along the parallels
    2. Scale in every direction everywhere
    3. Scale along the meridians
    4. No scale is correct anywhere
    Show answer

    Answer: C. The parallels are spaced at true distances, so the scale along the meridians is correct, while the scale along the parallels increases away from the centre.

  3. 3. For a polar zenithal equidistant projection with R = 3 cm and a 30° interval, the radius of the equator circle is about:

    1. 4.24 cm
    2. 3.14 cm
    3. 1.57 cm
    4. 4.71 cm
    Show answer

    Answer: D. Interval = 2π × 3 × 30 ÷ 360 = 1.571 cm. The equator is three intervals from the pole: 3 × 1.571 = 4.712, about 4.71 cm. 4.24 cm is the equal area radius.

  4. 4. For a polar zenithal equal area projection with R = 4 cm, the radius of the 30° parallel is: (sin 30° = 0.5)

    1. 4 cm
    2. 2 cm
    3. 4.19 cm
    4. 8 cm
    Show answer

    Answer: A. r = 2R sin((90° - 30°) ÷ 2) = 2 × 4 × sin 30° = 8 × 0.5 = 4 cm.

  5. 5. Why does the polar zenithal equal area projection keep areas correct?

    1. Because its parallels are equally spaced
    2. Because the scale along the meridians decreases in the same proportion as the scale along the parallels increases
    3. Because the light source is at infinity
    4. Because it shows only the equator correctly
    Show answer

    Answer: B. The decrease in scale along the meridians balances the increase along the parallels, so each small area keeps its true size. Equal spacing is the property of the equidistant version.

Sign in to keep track of the lessons you finish.

Next lesson → Final self-assessment: Map Projection

Privacy · Terms · Refunds · Delivery