- Practice
- About 15 min
- 5 practice questions
Properties of projections: equal area, true shape and true scale
Explain equal area (homolographic), true shape (orthomorphic) and true scale (equidistant) projections, show with calculations why scale on a cylindrical projection grows away from the equator, and choose a projection for a purpose.
If something looks wrong, please tell us.
By the end of this lesson you can
- Define equal area, true shape and true scale projections and give their other names.
- Calculate how much a parallel is stretched on a cylindrical projection.
- Choose a suitable projection for a given map.
Since no projection can keep everything correct, map-makers decide which property matters most for the map's purpose. A map comparing the forest area of countries needs true areas; a navigation chart needs true shapes and angles; a map for measuring distances needs true scale along certain lines.
Classification by properties
| Type | Also called | What is correct | Typical use |
|---|---|---|---|
| Equal area | Homolographic | The areas of different parts of the earth are shown correctly | Distribution maps: population, crops, forests |
| True shape | Orthomorphic | The shapes of small areas are shown correctly | Navigation and weather charts |
| True scale | Equidistant | Scale is correct along some parallels or meridians | General-purpose maps and measuring distances along those lines |
Note the limits stated in the chapter: no projection can keep the correct scale throughout; correct scale can be kept only along some parallels or meridians. Likewise, a true-shape projection keeps shapes correct only for small areas, and an equal-area projection keeps areas correct by distorting shapes.
Why parallels stretch on a cylindrical projection
On a globe of radius R, the equator has length 2πR. A parallel at latitude φ is a smaller circle of radius R cos φ, so its length is 2πR cos φ. On a normal cylindrical projection, every parallel is drawn as a straight line as long as the equator, 2πR. So the scale along the parallel is exaggerated by the factor 2πR ÷ (2πR cos φ) = 1 ÷ cos φ (called sec φ).
Length of a parallel on the globe = 2πR cos φ. On a normal cylindrical projection every parallel = 2πR, so east-west scale is stretched by 1/cos φ.
| Latitude φ | cos φ (3 d.p.) | Stretch 1/cos φ |
|---|---|---|
| 0° | 1.000 | 1 (true scale) |
| 30° | 0.866 | about 1.15 |
| 45° | 0.707 | about 1.41 |
| 60° | 0.500 | 2 |
| 90° | 0 | infinite: the pole, a point, becomes a line |
Worked example 1: stretch at 60° N
On a reduced globe of radius 2 cm, find the length of the 60° parallel on the globe and on a normal cylindrical projection. Working: globe: 2πR cos 60° = 2 × 3.1416 × 2 × 0.5 = 6.283 cm. Map: 2πR = 2 × 3.1416 × 2 = 12.566 cm. Ratio = 12.566 ÷ 6.283 = 2. Answer: 6.28 cm on the globe, 12.57 cm on the map; the parallel is stretched to twice its length. Check: 1 ÷ cos 60° = 1 ÷ 0.5 = 2.
An equal area cylindrical projection must make up for this east-west stretch by squeezing north-south: it places the parallels closer together towards the poles so that, in every small patch, the stretch in one direction is cancelled by the squeeze in the other. That keeps area right but flattens shapes near the poles. A true shape projection does the opposite: it stretches north-south by the same factor as east-west, which keeps small shapes right but makes high-latitude areas look far too big.
Two ways of handling the east-west stretch
-
Equal area
- North-south scale reduced to cancel the stretch
- Parallels crowd together towards the poles
- Areas true, shapes flattened at high latitudes
-
True shape
- North-south scale increased to match the stretch
- Parallels spread apart towards the poles
- Small shapes true, areas exaggerated at high latitudes
Worked example 2: matching map to projection
Choose a projection property for each map: (i) a world map comparing the area under rice cultivation in different countries; (ii) a ship's chart where the angle of a course must be read correctly; (iii) a map of the Arctic for measuring distances from the North Pole. Answer: (i) equal area, so that areas can be compared fairly; (ii) true shape (orthomorphic), which keeps angles correct locally; (iii) polar zenithal equidistant, with true scale along the meridians from the pole.
Key takeaways: equal area (homolographic) projections show areas correctly; true shape (orthomorphic) projections show shapes of small areas correctly; true scale (equidistant) projections keep scale correct along some parallels or meridians only. On a normal cylindrical projection, every parallel is drawn as long as the equator, so the east-west scale is stretched by 1/cos φ; equal area projections compensate by squeezing north-south.
Check your understanding
-
1. An orthomorphic projection is one that shows correctly the:
- areas of all regions
- shapes of small areas
- distances in all directions
- heights of mountains
Show answer
Answer: B. Orthomorphic means true shape: the shapes of small parts of the earth are shown correctly. Equal area projections are homolographic.
-
2. Another name for an equal area projection is:
- orthomorphic
- gnomonic
- homolographic
- stereographic
Show answer
Answer: C. Equal area projections are also called homolographic projections.
-
3. On a normal cylindrical projection, by what factor is the 45° parallel stretched compared with the globe? (cos 45° = 0.707)
- about 1.41
- about 0.71
- 2
- 1
Show answer
Answer: A. The stretch is 1 ÷ cos φ = 1 ÷ 0.707 = 1.414, so about 1.41 times.
-
4. Which statement about true scale (equidistant) projections is correct?
- They keep the scale correct everywhere on the map
- They show all areas correctly
- They are used only for the oceans
- They keep correct scale only along some parallels or meridians
Show answer
Answer: D. No projection can keep the scale correct throughout. Equidistant projections keep true scale only along certain parallels or meridians.
-
5. A map comparing the area of forests in different countries should be drawn on a projection that is:
- true shape
- equal area
- gnomonic
- true scale along the equator only
Show answer
Answer: B. To compare areas fairly, the areas must be shown correctly, so an equal area (homolographic) projection is used.
Sign in to keep track of the lessons you finish.