- Practice
- About 25 min
- 5 practice questions
Reflection: plane mirrors and spherical mirrors
Use the laws of reflection, find the deviation by a mirror, count images in inclined mirrors, derive f = R/2 and the mirror equation, and solve mirror problems with the Cartesian sign convention.
If something looks wrong, please tell us.
By the end of this lesson you can
- State the laws of reflection and find the angle of deviation d = 180° − 2i (or d = 2α with the glancing angle).
- Show that tilting a mirror by θ turns the reflected ray by 2θ.
- List the properties of a plane-mirror image and count the images formed by two inclined mirrors.
- Define pole, centre of curvature, focus and focal length, and prove f = R/2 for paraxial rays.
- Apply the Cartesian sign convention, derive 1/v + 1/u = 1/f and find the magnification m = −v/u.
Unit 6 of the Tamil Nadu textbook treats light as rays: straight lines that show only the direction in which light travels. A ray says nothing about brightness or colour, but it is enough to explain reflection, refraction, dispersion and scattering with simple geometry. A bundle of rays is a beam. This first lesson covers mirrors, flat and curved.
Laws of reflection and the angle of deviation
Reflection is the bouncing back of light into the same medium from a surface. The angle of incidence i and the angle of reflection r are both measured from the normal at the point of incidence. The laws are: (i) the incident ray, the reflected ray and the normal lie in one plane; (ii) i = r. They hold at every point of any surface, flat or curved. A smooth surface sends a parallel beam back as a parallel beam (regular reflection); a rough surface scatters it in many directions (irregular reflection), yet the laws still hold at each tiny patch.
The angle of deviation d is the angle between the incident direction (continued straight on) and the reflected ray. The incident and reflected rays make i + r with each other's continuation, so d = 180° − (i + r) = 180° − 2i. If instead we use the glancing angle α, measured between the incident ray and the mirror surface, then α = 90° − i and d = 2α.
Rotating a mirror. Keep the incident ray fixed and tilt the mirror by θ. The normal also tilts by θ, so the angle of incidence becomes i + θ and the reflected ray is now at i + θ on the other side of the new normal. The old reflected ray was at i − θ from the new normal, so the angle between the old and new reflected rays is (i + θ) − (i − θ) = 2θ. This is why a small turn of a mirror makes a spot of reflected light sweep twice as far, a fact used in sensitive meters.
Images in a plane mirror
Rays from a point object A reflect from the mirror and spread out as if they came from a point A′ behind it. Using alternate and corresponding angles, the two triangles formed by the mirror, the normal ray and an oblique ray are congruent, so the image distance equals the object distance. The image in a plane mirror is: virtual and erect; laterally inverted (left and right swapped); the same size as the object; as far behind the mirror as the object is in front.
| 360°/θ is | Object placed symmetrically | Object placed unsymmetrically |
|---|---|---|
| even | n = 360°/θ − 1 | n = 360°/θ − 1 |
| odd | n = 360°/θ − 1 | n = 360°/θ |
How tall must a mirror be? A person of height h, eyes a height h₂ above the feet and h₁ below the top of the head (h = h₁ + h₂), sees the top of the head by a ray that reflects halfway up between eye and head, and the feet by a ray that reflects halfway down between eye and feet. The mirror must therefore stretch from h₁/2 above eye level to h₂/2 below it: a length (h₁ + h₂)/2 = h/2. The distance from the mirror does not appear anywhere, so the answer does not depend on it.
Spherical mirrors: the terms
A spherical mirror is a part of a hollow sphere, polished on one side. If the reflecting surface is the inner (hollow) side it is a concave mirror; if it is the outer (bulging) side it is a convex mirror. The centre of curvature C is the centre of that sphere and its radius is the radius of curvature R. The pole P is the middle point of the mirror. The line through P and C is the principal axis. Rays parallel and close to the axis meet at (concave) or appear to spread from (convex) the focus F; PF is the focal length f, and the plane through F perpendicular to the axis is the focal plane.
Paraxial rays travel close to the principal axis at small angles and strike the mirror near the pole. Marginal rays strike far from the pole at large angles and come to a focus at a slightly different point. The whole unit uses paraxial rays only, so that small-angle approximations (tan θ ≈ θ, sin θ ≈ θ) are allowed.
Proof that f = R/2. A ray parallel to the axis strikes the mirror at M and reflects through F. CM is the normal, so the angle of incidence i equals ∠MCP, and the reflected ray makes ∠MFP = 2i with the axis. Drop MP onto the axis (M is close to P). Then tan i = PM/PC and tan 2i = PM/PF. For small angles, i = PM/PC and 2i = PM/PF. Dividing, 2 = PC/PF, so PC = 2PF, that is R = 2f or f = R/2. The same geometry works for a convex mirror.
Four rays for tracing a mirror image (any two locate it)
- Parallel to the axis After reflection passes through F (concave) or seems to come from F (convex).
- Through (or towards) F After reflection travels parallel to the axis.
- Through (or towards) C Strikes the mirror normally and retraces its path.
- At the pole P Reflects at an equal angle on the other side of the principal axis.
Cartesian sign convention
- Draw the incident light travelling from left to right (object on the left).
- Measure every distance from the pole, which is the origin.
- Distances to the right of the pole along the axis are positive; to the left, negative.
- Heights above the axis are positive; heights below it are negative.
With this convention a concave mirror has f and R negative (its focus lies to the left of P) and a convex mirror has f and R positive. A real object in front of the mirror always has u negative.
The mirror equation and magnification
Take an object AB beyond C in front of a concave mirror, with B the top. The ray from B to the pole reflects so that triangles BPA and B′PA′ are similar: A′B′/AB = PA′/PA. The ray from B parallel to the axis meets the mirror at D (PD ≈ AB, as D is close to P) and reflects through F, so triangles DPF and B′A′F are similar: A′B′/PD = A′F/PF = (PA′ − PF)/PF. Equating the two ratios: PA′/PA = (PA′ − PF)/PF. All three distances lie to the left, so put PA = −u, PA′ = −v, PF = −f: (−v)/(−u) = (−v + f)/(−f). Simplifying, v/u = (v − f)/f = v/f − 1. Dividing by v: 1/u = 1/f − 1/v, which rearranges to the mirror equation 1/v + 1/u = 1/f. Because signs were built in, it holds for every position and for convex mirrors too.
Lateral magnification m = h′/h (image height over object height). From the similar triangles with signs (A′B′ = −h′, AB = h, PA′ = −v, PA = −u), m = −v/u. Using the mirror equation it can also be written m = f/(f − u) = (f − v)/f. Negative m means an inverted (real) image; positive m an erect (virtual) image; |m| > 1 enlarged, |m| < 1 diminished. For a rod lying along the axis, the longitudinal magnification is the image length divided by the object length; it is found by locating the images of both ends.
d = 180° − 2i = 2α; tilt the mirror by θ, the ray turns by 2θ; f = R/2; 1/v + 1/u = 1/f; m = h′/h = −v/u = f/(f − u).
Worked example 1: a concave mirror forming a real image
An object 2.0 cm tall stands 18 cm in front of a concave mirror of focal length 12 cm. Find the image. Step 1 (signs): u = −18 cm, f = −12 cm. Step 2: 1/v = 1/f − 1/u = −1/12 + 1/18 = (−3 + 2)/36 = −1/36, so v = −36 cm. Step 3: m = −v/u = −(−36)/(−18) = −2. Step 4: h′ = m × h = −2 × 2.0 = −4.0 cm. The image is 36 cm in front of the mirror (on the object's side), so it is real; it is inverted and twice the size. Check: m = f/(f − u) = −12/(−12 + 18) = −12/6 = −2. ✓
Worked example 2: a convex mirror and an object inside F of a concave mirror
(a) A convex mirror has f = +20 cm; a car is 30 cm away (u = −30 cm). 1/v = 1/20 − 1/(−30) = 1/20 + 1/30 = (3 + 2)/60 = 5/60, so v = +12 cm. m = −(12)/(−30) = +0.4. The image is behind the mirror (virtual), erect and diminished, which is why convex mirrors are used as rear-view mirrors. (b) An object is 6.0 cm from a concave mirror of focal length 10 cm (u = −6.0 cm, f = −10 cm). 1/v = −1/10 + 1/6 = (−3 + 5)/30 = 2/30, so v = +15 cm and m = −15/(−6.0) = +2.5. The image is virtual, erect and 2.5 times larger: the principle of a shaving or make-up mirror.
Worked example 3: deviation, tilting and inclined mirrors
(a) A ray strikes a plane mirror at i = 35°. Deviation d = 180° − 2 × 35° = 110°. The glancing angle is α = 90° − 35° = 55°, and 2α = 110°, the same answer. (b) The mirror is now turned through 12° with the ray fixed: the reflected ray turns through 2 × 12° = 24°. (c) Two mirrors meet at 72°. 360°/72° = 5, which is odd: an object on the bisector (symmetric) gives 5 − 1 = 4 images, an object off the bisector gives 5 images. At 60°, 360°/60° = 6 is even, so 6 − 1 = 5 images wherever the object is.
Key takeaways
- Laws of reflection: coplanar rays and normal; i = r. Deviation d = 180° − 2i = 2α.
- Turning a mirror by θ turns the reflected ray by 2θ.
- A plane mirror gives a virtual, erect, laterally inverted, same-size image; a full view needs a mirror half your height.
- For paraxial rays f = R/2. Use the Cartesian convention: distances to the left of the pole are negative.
- Mirror equation 1/v + 1/u = 1/f; magnification m = −v/u; negative m means real and inverted.
Check your understanding
-
1. A ray falls on a plane mirror with a glancing angle of 25°. The angle of deviation is:
- 130°
- 25°
- 50°
- 65°
Show answer
Answer: C. With the glancing angle α, d = 2α = 2 × 25° = 50°. (Check: i = 90° − 25° = 65°, and 180° − 2 × 65° = 50°.)
-
2. With the incident ray fixed, a plane mirror is rotated through 15°. The reflected ray rotates through:
- 30°
- 15°
- 7.5°
- 45°
Show answer
Answer: A. Tilting the mirror by θ tilts the normal by θ; the angle between the old and new reflected rays is (i + θ) − (i − θ) = 2θ = 30°.
-
3. Two plane mirrors are inclined at 90°. How many images of an object placed between them are formed?
- 4
- 2
- 1
- 3
Show answer
Answer: D. 360°/90° = 4, which is even, so n = 360°/θ − 1 = 4 − 1 = 3 images for any position of the object.
-
4. An object is 30 cm in front of a concave mirror of radius of curvature 40 cm. Where is the image?
- 12 cm behind the mirror
- 60 cm in front of the mirror
- 20 cm in front of the mirror
- 60 cm behind the mirror
Show answer
Answer: B. f = R/2 = −20 cm, u = −30 cm. 1/v = 1/f − 1/u = −1/20 + 1/30 = (−3 + 2)/60 = −1/60, so v = −60 cm: 60 cm in front of the mirror (real). m = −v/u = −2, inverted and enlarged.
-
5. A convex mirror always forms an image that is:
- real, inverted and diminished
- virtual, inverted and enlarged
- real, erect and same size
- virtual, erect and diminished
Show answer
Answer: D. For a convex mirror f > 0 and u < 0, so 1/v = 1/f − 1/u is positive and v > 0 (behind the mirror, virtual). m = f/(f − u) is positive and less than 1 because f − u > f: erect and diminished.
Sign in to keep track of the lessons you finish.