- Practice
- About 28 min
- 5 practice questions
Refraction at a spherical surface and thin lenses
Derive the single-surface equation, define the two foci of a lens, obtain the lens maker's formula and the lens equation, and work with magnification, power, lenses in contact and silvered lenses.
If something looks wrong, please tell us.
By the end of this lesson you can
- Derive n₂/v − n₁/u = (n₂ − n₁)/R for refraction at one spherical surface.
- Define the primary and secondary focus and state the sign rule for focal lengths of lenses.
- Derive the lens maker's formula and the lens equation 1/v − 1/u = 1/f.
- Find magnification m = v/u and power P = 1/f, and combine lenses in contact.
- Find the focal length and power of a silvered lens.
A lens is two refracting surfaces close together, so we first study one curved surface. The laws of refraction hold at every point of it; the normal at any point passes through the centre of curvature. We assume monochromatic light and paraxial rays, and use the same Cartesian signs as for mirrors.
Refraction at a single spherical surface
A convex surface with centre C separates medium n₁ (left, containing a point object O) from medium n₂ (right), with n₂ > n₁. A ray from O strikes the surface at N and bends towards the normal NC, meeting the axis at the image I. Let ∠NOP = α, ∠NCP = β, ∠NIP = γ. For small angles, α = PN/PO, β = PN/PC, γ = PN/PI. Snell's law for small angles: n₁ i = n₂ r. The exterior angle of triangle ONC gives i = α + β, and of triangle INC gives β = r + γ, so r = β − γ. Substituting: n₁(α + β) = n₂(β − γ), that is n₁α + n₂γ = (n₂ − n₁)β. Putting in the distances and cancelling PN: n₁/PO + n₂/PI = (n₂ − n₁)/PC. With signs PO = −u, PI = +v, PC = +R:
n₂/v − n₁/u = (n₂ − n₁)/R (single spherical surface); from air into a medium of index n: n/v − 1/u = (n − 1)/R.
Because the signs are part of the formula, it also covers cases where the rays diverge after refraction and form a virtual image.
Worked example 1: the end of a glass rod
A long glass rod (n = 1.5) has a convex end of radius 10 cm (R = +10 cm). Object in air on the axis. (a) 40 cm from the end (u = −40 cm): 1.5/v = (1.5 − 1)/10 + 1/(−40) = 0.050 − 0.025 = 0.025, so v = 1.5/0.025 = +60 cm. A real image forms 60 cm inside the glass. (b) 10 cm from the end (u = −10 cm): 1.5/v = 0.050 − 0.100 = −0.050, so v = −30 cm. The image is virtual, 30 cm to the left of the surface, on the object's side.
Thin lenses: foci and sign convention
A thin lens is a transparent body bounded by two spherical surfaces (or one spherical and one plane, for which R = ∞), with a very small thickness. The media on its two sides may differ, so a lens has two foci. The primary focus F₁ is the point where an object must be placed so that the emerging rays are parallel to the axis. The secondary focus F₂ is the point where incident rays parallel to the axis meet (or seem to meet) after passing through. If the same medium is on both sides, the two focal lengths are equal; we usually use F₂. Sign rule: the focal length of a lens is positive for a converging lens and negative for a diverging lens, whatever side the focus is on. All other distances follow the Cartesian convention.
Lens maker's formula and lens equation
A lens of index n₂ in a medium n₁ has radii R₁ (first surface) and R₂ (second surface). The first surface alone would form an image I′ at v′: n₂/v′ − n₁/u = (n₂ − n₁)/R₁. For the second surface, light goes from n₂ to n₁ and I′ is its (virtual) object: n₁/v − n₂/v′ = (n₁ − n₂)/R₂. Adding cancels v′: n₁(1/v − 1/u) = (n₂ − n₁)(1/R₁ − 1/R₂), so 1/v − 1/u = (n₂/n₁ − 1)(1/R₁ − 1/R₂). An object at infinity gives v = f, so 1/f = (n₂/n₁ − 1)(1/R₁ − 1/R₂). In air (n₁ = 1, n₂ = n) this is the lens maker's formula 1/f = (n − 1)(1/R₁ − 1/R₂): it tells a manufacturer what curvatures give a desired focal length with a given glass. Comparing the two results gives the lens equation 1/v − 1/u = 1/f, valid for every thin lens. Flipping a lens over does not change f: R₁ and R₂ swap and both change sign, leaving (1/R₁ − 1/R₂) the same.
Magnification. From similar triangles through the optic centre, h′/h = v/u once the signs are applied: m = h′/h = v/u, also m = f/(f + u) = (f − v)/f. A real image has negative m; a virtual image positive m. A concave lens always gives a virtual, erect, diminished image (0 < m < 1).
Worked example 2: designing and using a lens
(a) A biconvex lens (n = 1.5) has radii 20 cm and 30 cm. With light from the left, R₁ = +20 cm, R₂ = −30 cm: 1/f = 0.5 × (1/20 + 1/30) = 0.5 × (3 + 2)/60 = 0.5 × 5/60 = 1/24, so f = +24 cm (converging). (b) A convex lens of focal length 15 cm has an object 25 cm away (u = −25 cm): 1/v = 1/f + 1/u = 1/15 − 1/25 = (5 − 3)/75 = 2/75, v = +37.5 cm; m = v/u = 37.5/(−25) = −1.5. Real, inverted, 1.5 times larger. (c) A concave lens, f = −20 cm, object at 30 cm: 1/v = −1/20 + 1/(−30) = −(3 + 2)/60 = −1/12, v = −12 cm; m = −12/(−30) = +0.4: virtual, erect, diminished. (d) The same glass lens as in (a) in water (n₁ = 4/3): n₂/n₁ − 1 = 1.5/1.333 − 1 = 0.125 instead of 0.5, so f becomes 24 × 0.5/0.125 = 96 cm.
Power of a lens and lenses in contact
The power of a lens measures how strongly it converges or diverges light: P = 1/f, with f in metre. Its unit is the dioptre (D), 1 D = 1 m⁻¹. Power is positive for converging and negative for diverging lenses. From the lens maker's formula, P = (n − 1)(1/R₁ − 1/R₂): a higher index or more sharply curved (bulky) surfaces mean more power.
Lenses in contact. Two thin lenses f₁ and f₂ touch on a common axis. The first forms an image at v′: 1/v′ − 1/u = 1/f₁. This acts as the object for the second: 1/v − 1/v′ = 1/f₂. Adding: 1/v − 1/u = 1/f₁ + 1/f₂. The pair behaves as a single lens with 1/f = 1/f₁ + 1/f₂ (and so on for more lenses), that is P = P₁ + P₂ + ..., an algebraic sum. The total magnification is the product m = m₁ × m₂ × .... Combinations give the required focal length and sharper images in cameras, microscopes and telescopes.
Silvered lens
If one face of a lens is silvered on the outside, light passes through the lens, reflects from the silvered face and passes through the lens again. The system acts as a mirror with power P = 2P_l + P_m. Following the textbook, the power of a mirror is P_m = −1/f_m (so a concave mirror, with negative f_m, has positive power) and the whole system, being a modified mirror, has P = −1/f. Hence −1/f = 2/f_l − 1/f_m, with signs. Image positions are then found with the mirror equation.
Worked example 3: combinations and a silvered lens
(a) Lenses of +20 cm and −30 cm in contact: 1/f = 1/20 − 1/30 = (3 − 2)/60 = 1/60, f = +60 cm, P = 1/0.60 = +1.67 D (converging). (b) Lenses of +4.0 D and −2.5 D: P = +1.5 D, f = 1/1.5 = 0.667 m = 66.7 cm. (c) A plano-convex lens (n = 1.5, curved radius 20 cm) has its plane face silvered. f_l: 1/f_l = 0.5 × (1/20) = 1/40, so f_l = 40 cm = 0.40 m. A plane mirror has P_m = 0. P = 2/0.40 + 0 = 5.0 D, and −1/f = 5.0 gives f = −0.20 m: the system behaves as a concave mirror of focal length 20 cm. An object 30 cm in front (u = −30 cm): 1/v = 1/f − 1/u = −1/20 + 1/30 = −1/60, v = −60 cm, a real image 60 cm in front.
Convex lens and concave lens
-
Convex (converging)
- f and P positive
- Real inverted image when the object is beyond F
- Virtual erect enlarged image when the object is inside F
- Thicker at the middle
-
Concave (diverging)
- f and P negative
- Always a virtual, erect, diminished image
- 0 < m < 1 for a real object
- Thinner at the middle
Key takeaways
- One surface: n₂/v − n₁/u = (n₂ − n₁)/R.
- Lens maker: 1/f = (n − 1)(1/R₁ − 1/R₂) in air; in a medium use (n₂/n₁ − 1).
- Lens equation 1/v − 1/u = 1/f; m = v/u; f positive for converging lenses.
- P = 1/f (dioptre, f in m); in contact, powers add and magnifications multiply.
- Silvered lens: P = 2P_l + P_m and it behaves as a mirror.
Check your understanding
-
1. A biconvex lens (n = 1.5) has both radii equal to 15 cm. Its focal length in air is:
- 7.5 cm
- 15 cm
- 30 cm
- 45 cm
Show answer
Answer: B. R₁ = +15 cm, R₂ = −15 cm. 1/f = 0.5 × (1/15 + 1/15) = 0.5 × 2/15 = 1/15, so f = 15 cm.
-
2. An object is 30 cm from a convex lens of focal length 10 cm. The image distance and magnification are:
- +15 cm, −0.5
- −15 cm, +0.5
- +30 cm, −1
- +7.5 cm, −0.25
Show answer
Answer: A. u = −30 cm. 1/v = 1/f + 1/u = 1/10 − 1/30 = 2/30, v = +15 cm. m = v/u = 15/(−30) = −0.5: real, inverted, half size.
-
3. A convex lens of power +5 D is in contact with a concave lens of power −2 D. The focal length of the combination is:
- 14.3 cm
- −33.3 cm
- 50 cm
- 33.3 cm
Show answer
Answer: D. P = +5 − 2 = +3 D, so f = 1/3 m = 0.333 m = 33.3 cm (converging).
-
4. Light in air meets a convex glass surface (n = 1.5, R = +20 cm) from an object 60 cm away. The image forms:
- 60 cm inside the glass
- 180 cm inside the glass
- 120 cm in air on the object's side
- 90 cm inside the glass
Show answer
Answer: B. 1.5/v = (1.5 − 1)/20 + 1/(−60) = 0.025 − 0.01667 = 0.00833, so v = 1.5/0.00833 = +180 cm: a real image 180 cm inside the glass.
-
5. Why does the focal length of a lens not change when the lens is turned round?
- Because the refractive index changes sign
- Because the focal length depends only on n
- Because R₁ and R₂ swap and change sign, leaving (1/R₁ − 1/R₂) the same
- Because the lens becomes a mirror
Show answer
Answer: C. Turning the lens makes the new R₁ equal to −(old R₂) and the new R₂ equal to −(old R₁). Then 1/R₁ − 1/R₂ = −1/R₂(old) + 1/R₁(old), the same value, so f is unchanged.
Sign in to keep track of the lessons you finish.