• Practice
  • About 25 min
  • 5 practice questions

Total internal reflection, optical fibres and the glass slab

Find the critical angle, state the conditions for total internal reflection, explain its effects (diamond, mirage, looming, prisms, Snell's window, optical fibres) and derive the acceptance angle and the lateral shift in a slab.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Define the critical angle, derive sin i_c = n₂/n₁ and state the two conditions for total internal reflection.
  • Explain the sparkle of diamond, mirage, looming and reflecting prisms.
  • Derive the radius of Snell's window R = d/√(n² − 1).
  • Derive the acceptance angle and numerical aperture of an optical fibre.
  • Derive the lateral displacement L = t sin(i − r)/cos r for a glass slab.

When light goes from a denser to a rarer medium it bends away from the normal, so the angle of refraction is always larger than the angle of incidence. Push the angle of incidence up and something striking happens: refraction stops and all the light reflects. This total internal reflection carries internet signals, lets doctors see inside the body and makes diamonds sparkle.

Critical angle and total internal reflection

As i increases in the denser medium, r grows faster and reaches 90°, when the refracted ray just grazes the boundary. The angle of incidence in the denser medium for which the angle of refraction is 90° is the critical angle i_c. For any i > i_c no refraction is possible and all the light returns into the denser medium: total internal reflection (TIR). Two conditions: (i) light must travel from a denser to a rarer medium; (ii) the angle of incidence must exceed the critical angle.

Formula. Put r = 90° in n₁ sin i_c = n₂ sin 90° = n₂: sin i_c = n₂/n₁ (n₁ > n₂). If the rarer medium is air, sin i_c = 1/n, i_c = sin⁻¹(1/n). For glass (n = 1.5) i_c = sin⁻¹(0.667) = 41.8°; for water (n = 4/3 ≈ 1.333) i_c = 48.6°; for diamond (about 2.42) i_c ≈ 24.4°. The larger n, the smaller the critical angle.

Increasing the angle of incidence in the denser medium

  1. i < i_c Ray refracts into the rarer medium, bent away from the normal (plus weak reflection).
  2. i = i_c Refracted ray grazes the surface: r = 90°.
  3. i > i_c No refraction: all the light is reflected back (TIR).

Effects of total internal reflection

Diamond. With i_c only about 24.4°, any ray inside meeting a face at more than 24.4° (a range up to 90°) is totally reflected. A skilled cutter shapes the faces so that light entering the stone is reflected many times before it leaves, giving its brilliance. Mirage. On a hot day air near the road is hotter, less dense and of lower refractive index than air above. Light from a tall object going down bends more and more away from the normal and, near the ground, is totally reflected upwards. The eye sees an inverted image as if below the ground; shimmering air makes it look like a pool of water. Looming (superior mirage) is the reverse, seen over glaciers and frozen lakes: the air near the ground is colder and denser, light bends downward, and an inverted image appears a little above the surface.

Reflecting prisms. A right-angled prism with 45° angles can turn light through 90° or 180° by TIR, because the light meets the long or short face at 45°. This works only if the critical angle of the glass is less than 45° (n > √2 ≈ 1.414). Such prisms reflect almost all the light, better than a silvered mirror, and are used in binoculars and periscopes; one arrangement inverts the image on the same side, another on the other side.

Snell's window

A lamp under water lights the whole surface when seen from outside. Seen from inside, the light entering from outside fills only a cone of half-angle i_c: an underwater observer sees the outside world through a bright circle, Snell's window, and a water animal's angle of view is 2i_c = 97.2° for water. Radius. Let the eye be at A, a depth d below the centre C of the circle, and let the edge ray meet the surface at B, CB = R, at the critical angle. From the triangle ABC, sin i_c = R/√(R² + d²). Also sin i_c = n₂/n₁. Equate and square: R²/(R² + d²) = n₂²/n₁². Invert: 1 + d²/R² = n₁²/n₂², so d²/R² = (n₁² − n₂²)/n₂², and R = d n₂/√(n₁² − n₂²). With air outside (n₂ = 1, n₁ = n): R = d/√(n² − 1).

Worked example 1: critical angle and Snell's window

(a) A medium has critical angle 30° against air. n = 1/sin 30° = 1/0.5 = 2.0. (b) Glass (1.5) in water (1.33): sin i_c = 1.33/1.5 = 0.887, i_c = 62.5°. TIR inside glass is harder under water because the critical angle is larger. (c) A diver 3.0 m below the surface (n = 4/3) looks up. √(n² − 1) = √(16/9 − 1) = √7/3 = 0.882, so R = 3.0/0.882 = 3.40 m. The bright circle has area πR² = 3.142 × 3.40² ≈ 36.4 m² (36.35 m² unrounded).

Optical fibres and the acceptance angle

An optical fibre has a central core surrounded by a cladding of lower refractive index (n₁ > n₂). Light inside the core meets the core-cladding boundary at more than the critical angle and travels by repeated total internal reflections with little loss, even round gentle bends. An endoscope is a bundle of such fibres that doctors insert through the mouth, nose or a small opening to see, and even operate, inside the body.

Acceptance angle. Light from an outer medium (n₃) enters the flat end of the core at A at angle i_a and refracts at r_a: n₃ sin i_a = n₁ sin r_a. Inside, it meets the cladding at B at the critical angle: sin i_c = n₂/n₁. The triangle at the entry gives i_c = 90° − r_a, so cos r_a = n₂/n₁ and sin r_a = √(1 − n₂²/n₁²) = √(n₁² − n₂²)/n₁. Then n₃ sin i_a = √(n₁² − n₂²), giving i_a = sin⁻¹[√(n₁² − n₂²)/n₃]. In air, i_a = sin⁻¹√(n₁² − n₂²). Rays entering at any angle from 0 to i_a form the acceptance cone. The quantity NA = n₃ sin i_a = √(n₁² − n₂²) is the numerical aperture. A fibre without cladding in air has n₂ = 1; if n₁ ≥ √2, every ray entering through the flat end is trapped.

Worked example 2: an optical fibre

A fibre has core n₁ = 1.50 and cladding n₂ = 1.40. In air: n₁² − n₂² = 2.25 − 1.96 = 0.29; √0.29 = 0.539. NA = 0.539 and i_a = sin⁻¹(0.539) = 32.6°. In water (n₃ = 1.33): sin i_a = 0.539/1.33 = 0.405, so i_a = 23.9°. The acceptance cone narrows in a denser outer medium, while NA = √(n₁² − n₂²) is unchanged.

Lateral displacement in a glass slab

A ray entering a parallel-sided slab bends towards the normal; leaving it, it bends away by the same amount. The emergent ray is parallel to the incident ray but shifted sideways by the lateral displacement L. Let the ray enter at B and leave at C, with slab thickness t, angle of incidence i and angle of refraction r. In the right triangle BCE (CE perpendicular to the undeviated path), sin(i − r) = L/BC. In the right triangle BCF (BF along the normal, of length t), cos r = t/BC. Eliminating BC: L = t sin(i − r)/cos r. L increases with the thickness, with the angle of incidence and with the refractive index (a larger n makes r smaller and i − r larger).

Worked example 3: lateral shift

A ray strikes a glass slab 6.0 cm thick (n = 1.5) at 45°. Step 1: sin r = sin 45°/1.5 = 0.4714, r = 28.1°. Step 2: i − r = 16.9°, sin 16.9° = 0.290; cos 28.1° = 0.882. Step 3: L = 6.0 × 0.290/0.882 = 1.97 cm. The ray leaves parallel to its original direction, shifted almost 2 cm sideways.

sin i_c = n₂/n₁ (= 1/n in air); Snell's window R = d/√(n² − 1); NA = n₃ sin i_a = √(n₁² − n₂²); lateral shift L = t sin(i − r)/cos r.

Key takeaways

  • TIR needs denser-to-rarer travel and i greater than i_c, where sin i_c = n₂/n₁.
  • Diamond (small i_c), mirage (hot ground), looming (cold ground) and 45° prisms all use TIR.
  • Snell's window has radius R = d/√(n² − 1) and an angle of view 2i_c.
  • Optical fibres need n_core > n_cladding; acceptance angle i_a = sin⁻¹[√(n₁² − n₂²)/n₃].
  • A slab shifts a ray sideways by L = t sin(i − r)/cos r without changing its direction.

Check your understanding

  1. 1. Which pair of conditions is needed for total internal reflection?

    1. Light goes from rarer to denser; i greater than i_c
    2. Light goes from denser to rarer; i greater than i_c
    3. Light goes from denser to rarer; i less than i_c
    4. Light goes from rarer to denser; i equal to i_c
    Show answer

    Answer: B. Only in going from a denser to a rarer medium can r reach 90°, and TIR happens when the angle of incidence exceeds that critical angle.

  2. 2. The critical angle for a material in air is 45°. Its refractive index is:

    1. 1.73
    2. 1.50
    3. 0.71
    4. 1.41
    Show answer

    Answer: D. n = 1/sin i_c = 1/sin 45° = 1/0.7071 = √2 ≈ 1.41.

  3. 3. A small lamp is 4.0 m deep in a pool (n = 5/4). The radius of the circle of light seen at the surface from above is:

    1. 5.33 m
    2. 3.0 m
    3. 6.67 m
    4. 4.0 m
    Show answer

    Answer: A. R = d/√(n² − 1) = 4.0/√(25/16 − 1) = 4.0/√(9/16) = 4.0/0.75 = 5.33 m.

  4. 4. An optical fibre in air has core index 1.60 and cladding index 1.50. Its numerical aperture is about:

    1. 0.10
    2. 0.31
    3. 0.56
    4. 1.07
    Show answer

    Answer: C. NA = √(n₁² − n₂²) = √(2.56 − 2.25) = √0.31 = 0.557 ≈ 0.56.

  5. 5. For a ray passing through a parallel glass slab, which change increases the lateral displacement?

    1. Using a thinner slab
    2. Decreasing the angle of incidence to zero
    3. Using glass of lower refractive index
    4. Using a thicker slab
    Show answer

    Answer: D. L = t sin(i − r)/cos r is proportional to the thickness t. A thinner slab, a smaller i or a lower n all reduce L; at i = 0 there is no shift at all.

Privacy · Terms · Refunds · Delivery