Revision notes

Unit 8 Dual Nature of Radiation and Matter: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Electron emission and the discovery of the photoelectric effect

Electron emission by the form of energy supplied

  • Thermionic emission Heat gives free electrons enough energy; the number emitted depends on the metal and its temperature.
    • Cathode ray tubes
    • Electron microscopes
    • X-ray tubes
  • Field emission A very strong electric field pulls electrons over the barrier.
    • Field emission scanning electron microscope
    • Field-emission display
  • Photoelectric emission Radiation of suitable frequency transfers energy to electrons; the number emitted depends on the intensity.
    • Photodiodes
    • Photoelectric cells
  • Secondary emission Fast electrons striking a metal give their energy to its free electrons.
    • Image intensifiers
    • Photomultiplier tubes

Work function φ₀ = least energy for an electron to escape the surface. 1 eV = 1.602 × 10⁻¹⁹ J. Photoelectric effect: radiation of suitable frequency ejects electrons from a surface.

  • Free electrons are held in by the surface barrier; the work function is the least energy to free one.
  • 1 eV = 1.602 × 10⁻¹⁹ J; metals with low work function emit more easily.
  • Emission can be thermionic (heat), field (strong electric field), photoelectric (radiation) or secondary (fast electrons).
  • Hertz saw UV strengthen a spark; Hallwachs showed UV removes negative charge from zinc; Lenard measured the resulting current in vacuum.
  • Alkali metals respond to visible light; zinc, cadmium and magnesium need ultraviolet.
Read the full lesson

Lesson 2

Photoelectric experiments, stopping potential and the laws

K_max = ½mv²_max = eV₀ (in joule) = V₀ (in eV); v_max = √(2eV₀/m) ≈ 5.93 × 10⁵ √V₀ m s⁻¹.

Wave theory prediction versus experiment

  • Wave theory predicts
    • K_max grows with intensity
    • Any frequency works if bright enough
    • A long delay for dim light
  • Experiment shows
    • K_max independent of intensity
    • No emission below threshold frequency
    • Emission is practically instant (under 10⁻⁹ s)
  • Photocurrent ∝ intensity; saturation current rises with intensity.
  • Stopping potential V₀ measures the fastest electrons: K_max = eV₀.
  • V₀ is independent of intensity but increases linearly with frequency.
  • No emission below the threshold frequency ν₀, and no time lag above it.
  • The wave theory cannot explain the threshold, the intensity-independence of K_max, or the instant emission.
Read the full lesson

Lesson 3

Photons and Einstein's photoelectric equation

E = hν = hc/λ; p = h/λ; K_max = hν − φ₀ = eV₀; φ₀ = hν₀ = hc/λ₀; hc ≈ 1240 eV nm.

  • Planck: oscillator energy is quantised, Eₙ = nhν. Einstein: light itself comes as photons of energy hν.
  • Einstein's equation K_max = hν − φ₀; threshold hν₀ = φ₀.
  • K_max-ν graph: straight line, slope h (same for all metals), intercept −φ₀.
  • hc ≈ 1240 eV nm gives photon energies quickly.
  • Photo cells (emissive, voltaic, conductive) turn light into electrical signals.
Read the full lesson

Lesson 4

Matter waves: de Broglie, Davisson-Germer and the electron microscope

λ = h/p = h/mv = h/√(2mK) = h/√(2mqV); electron: λ = 12.27/√V Å.

Davisson-Germer experiment

  1. Hot filament Thermionic electrons emitted (L.T. battery).
  2. Accelerated Through 54 V by the H.T. battery; collimated by diaphragms.
  3. Nickel crystal Atomic planes diffract the electron waves.
  4. Rotating detector Intensity peak at 50°; λ = 1.65 Å measured, 1.67 Å predicted.
  • De Broglie: every moving particle has a matter wave with λ = h/p.
  • Electrons through V volt: λ = 12.27/√V Å; generally λ = h/√(2mqV).
  • At equal kinetic energy, lighter particles have longer de Broglie wavelengths.
  • Davisson and Germer found electron diffraction by nickel: 1.65 Å measured, 1.67 Å predicted at 54 V.
  • Electron microscopes use short electron waves and magnetic lenses for very high resolution.
Read the full lesson

Lesson 5

X-rays: production, spectra and uses

The two parts of an X-ray spectrum

  • Continuous spectrum
    • Braking radiation of decelerated electrons
    • All wavelengths above a cut-off λ₀
    • λ₀ = 12400/V Å, same for all targets
    • Changes with accelerating voltage
  • Characteristic spectrum
    • Electron transitions into inner-shell vacancies
    • Sharp peaks: Kα, Kβ, L lines
    • Wavelengths fixed by the target element
    • Appear only when the voltage is high enough to remove inner electrons

Cut-off: eV = hc/λ₀, so λ₀ = 12400/V Å (Duane-Hunt). Continuous = Bremsstrahlung; peaks = inner-shell transitions (K, L series).

  • X-rays (Roentgen, 1895) are short-wavelength electromagnetic waves, undeflected by fields and highly penetrating.
  • They are produced when fast electrons are stopped by a high-melting-point target; most energy becomes heat.
  • The continuous spectrum is Bremsstrahlung with cut-off λ₀ = 12400/V Å, independent of the target.
  • Characteristic lines (K, L series) come from electrons filling inner-shell vacancies and identify the target.
  • Uses: radiographs, therapy, industrial flaw detection, crystal structure studies.
Read the full lesson

Privacy · Terms · Refunds · Delivery