- Practice
- About 24 min
- 5 practice questions
Photoelectric experiments, stopping potential and the laws
Describe the apparatus for studying the photoelectric effect, explain how photocurrent depends on intensity, potential and frequency, define stopping potential and threshold frequency, state the laws and show why the wave theory fails.
If something looks wrong, please tell us.
By the end of this lesson you can
- Describe the apparatus used to study the photoelectric effect.
- Explain the effect of intensity, anode potential and frequency on the photocurrent.
- Define stopping potential and use K_max = eV₀ and v_max = √(2eV₀/m).
- State the five laws of photoelectric effect.
- Explain three ways in which the classical wave theory fails.
Lenard's discovery raised questions: how many electrons come out, how fast, and what decides it? A careful experiment varies one factor at a time: the intensity of the light, the potential of the collecting electrode, the frequency of the light, and the metal.
The apparatus
A source S gives light of known, variable frequency ν and intensity I. It falls through a quartz window (which passes ultraviolet and visible light) onto a cathode C of photosensitive material inside an evacuated glass tube. An anode A collects the emitted electrons. A high-tension battery feeds a potential divider, so A can be made positive or negative with respect to C; a centre-zero voltmeter reads this potential and a microammeter in series reads the photocurrent. With no light, the current is zero.
Effect of intensity
Keep the frequency and the (positive) anode potential fixed and vary the intensity. A graph of photocurrent against intensity is a straight line through the origin: the photocurrent, that is the number of electrons emitted per second, is directly proportional to the intensity (brightness) of the light.
Effect of potential: saturation and stopping potential
Keep frequency and intensity fixed. As the positive potential of A is increased, the photocurrent rises and then levels off at the saturation current, when every emitted electron is collected. Now make A negative (retarding). The current does not drop to zero at once, because electrons leave with different kinetic energies and the faster ones still reach A. As the retarding potential grows, fewer reach A, and at a particular value V₀ the current becomes zero. The stopping (cut-off) potential V₀ is the negative potential of the collector just sufficient to stop the most energetic photoelectrons. The work done on the fastest electron equals its kinetic energy:
K_max = ½mv²_max = eV₀ (in joule) = V₀ (in eV); v_max = √(2eV₀/m) ≈ 5.93 × 10⁵ √V₀ m s⁻¹.
With brighter light of the same frequency, the saturation current increases but V₀ stays the same. So the stopping potential, and the maximum kinetic energy of photoelectrons, do not depend on intensity.
Worked example 1: from stopping potential to speed
The photocurrent from a metal stops at a retarding potential of 2.25 V. K_max = eV₀ = 1.602 × 10⁻¹⁹ × 2.25 = 3.60 × 10⁻¹⁹ J (= 2.25 eV). v_max = √(2eV₀/m) = √(2 × 3.60 × 10⁻¹⁹/9.11 × 10⁻³¹) = √(7.91 × 10¹¹) = 8.9 × 10⁵ m s⁻¹. Check with the shortcut: 5.93 × 10⁵ × √2.25 = 5.93 × 10⁵ × 1.5 = 8.9 × 10⁵ m s⁻¹. ✓
Effect of frequency
Keep the intensity fixed and repeat with different frequencies. The saturation current is the same, but the stopping potential is larger for higher frequency: the electrons come out faster. A graph of V₀ against ν for a metal is a straight line. It meets the frequency axis at the threshold frequency ν₀: below ν₀ no electrons are emitted at all, however intense the light. Different metals give parallel lines with different threshold frequencies.
Laws of photoelectric effect
- For a given metal, electrons are emitted only if the frequency of the light exceeds a minimum value, the threshold frequency.
- Above the threshold, the number of photoelectrons (and the saturation current) is directly proportional to the intensity.
- The maximum kinetic energy of photoelectrons is independent of the intensity.
- The maximum kinetic energy increases linearly with the frequency of the light.
- There is no time lag between the arrival of light and the emission of electrons.
Why the wave theory fails
In the wave picture, light delivers energy continuously and spreads it evenly over the wavefront. (i) A brighter wave has a larger electric field amplitude, which should push electrons harder, so K_max should increase with intensity: experiment says it does not. (ii) Any frequency, if intense enough, should eventually free electrons, so there should be no threshold frequency: experiment says there is one. (iii) Each electron, receiving only a tiny share of energy spread over the wavefront, should need a long time to collect the work function: experiment shows emission within about 10⁻⁹ s.
Worked example 2: how long would the wave theory make us wait?
Use made-up but realistic values: light of intensity I = 1.0 × 10⁻⁶ W m⁻² falls on caesium (φ₀ = 2.14 eV = 3.43 × 10⁻¹⁹ J). Suppose each atom (radius r = 1.0 × 10⁻¹⁰ m) collects the energy falling on its cross-section A = πr² = 3.14 × 10⁻²⁰ m² and gives it to one electron. Power per atom = IA = 3.14 × 10⁻²⁶ W. Time to gather φ₀: t = φ₀/(IA) = 3.43 × 10⁻¹⁹/3.14 × 10⁻²⁶ = 1.09 × 10⁷ s, about 126 days. Yet the measured delay is under 10⁻⁹ s: the wave theory is badly wrong here.
Wave theory prediction versus experiment
-
Wave theory predicts
- K_max grows with intensity
- Any frequency works if bright enough
- A long delay for dim light
-
Experiment shows
- K_max independent of intensity
- No emission below threshold frequency
- Emission is practically instant (under 10⁻⁹ s)
Key takeaways
- Photocurrent ∝ intensity; saturation current rises with intensity.
- Stopping potential V₀ measures the fastest electrons: K_max = eV₀.
- V₀ is independent of intensity but increases linearly with frequency.
- No emission below the threshold frequency ν₀, and no time lag above it.
- The wave theory cannot explain the threshold, the intensity-independence of K_max, or the instant emission.
Check your understanding
-
1. The intensity of light falling on a photosensitive surface is doubled, its frequency unchanged. Which quantity doubles?
- The saturation photocurrent
- The stopping potential
- The maximum kinetic energy
- The threshold frequency
Show answer
Answer: A. The number of electrons emitted per second, and so the saturation current, is proportional to intensity. V₀, K_max and ν₀ do not depend on intensity.
-
2. Photoelectrons are stopped by a retarding potential of 1.5 V. Their maximum kinetic energy is:
- 1.5 J
- 2.4 × 10⁻¹⁹ eV
- 1.07 × 10⁻¹⁹ J
- 2.4 × 10⁻¹⁹ J
Show answer
Answer: D. K_max = eV₀ = 1.602 × 10⁻¹⁹ × 1.5 = 2.4 × 10⁻¹⁹ J (which is 1.5 eV).
-
3. Light below the threshold frequency falls on a metal with very high intensity. What happens?
- Many slow electrons are emitted
- Electrons are emitted after a delay
- No electrons are emitted
- Electrons are emitted with large kinetic energy
Show answer
Answer: C. Below the threshold frequency no photoemission occurs, however intense the light. This is one of the facts the wave theory cannot explain.
-
4. A graph of stopping potential V₀ against frequency ν for a metal is:
- a parabola through the origin
- a straight line cutting the frequency axis at ν₀
- a horizontal line
- a straight line through the origin
Show answer
Answer: B. V₀ rises linearly with ν above the threshold and is zero below it, so the line meets the frequency axis at the threshold frequency ν₀.
-
5. The maximum speed of photoelectrons whose stopping potential is 4.0 V is about:
- 5.9 × 10⁵ m s⁻¹
- 2.4 × 10⁶ m s⁻¹
- 8.4 × 10⁵ m s⁻¹
- 1.2 × 10⁶ m s⁻¹
Show answer
Answer: D. v_max = 5.93 × 10⁵ × √V₀ = 5.93 × 10⁵ × 2 = 1.19 × 10⁶ m s⁻¹ ≈ 1.2 × 10⁶ m s⁻¹.
Sign in to keep track of the lessons you finish.