- Practice
- About 20 min
- 5 practice questions
Electron emission and the discovery of the photoelectric effect
Explain why free electrons stay inside a metal, define the surface barrier, work function and electron volt, name the four kinds of electron emission, and describe the observations of Hertz, Hallwachs and Lenard.
If something looks wrong, please tell us.
By the end of this lesson you can
- Contrast a particle (localised) with a wave (spread out), and say why radiation and matter both need a dual description.
- Explain the surface barrier and define the work function φ₀.
- Convert between electron volt and joule.
- Describe thermionic, field, photoelectric and secondary emission with examples.
- Describe the experiments of Hertz, Hallwachs and Lenard and define the photoelectric effect.
In everyday life we meet particles (marbles, grains of sand) and waves (sea waves, sound). A particle is a tiny concentration of matter, localised in space and time; a wave is a spread-out distribution of energy. Both carry energy and momentum. Classical physics kept them separate. Yet electromagnetic radiation, which shows interference, diffraction and polarisation like a wave, behaves like a stream of particles in black body radiation and the photoelectric effect; and electrons, first known as particles with mass and charge, also show wave behaviour. This unit of the Tamil Nadu textbook studies this wave-particle duality.
Free electrons and the work function
In a metal the outermost electrons are loosely bound, so even at room temperature a large number of free electrons move about at random inside it. They cannot leave the surface, because at the surface the positive nuclei pull them back. This potential barrier is the surface barrier. The free electrons have various kinetic energies, none enough to cross it, so extra energy must be supplied. The liberation of electrons from a surface is electron emission.
The work function φ₀ of a metal is the minimum energy needed for an electron to escape from its surface. It is measured in electron volt (eV). One electron volt is the kinetic energy an electron gains when accelerated through a potential difference of 1 V: 1 eV = qV = 1.602 × 10⁻¹⁹ C × 1 V = 1.602 × 10⁻¹⁹ J. Work function depends on the metal and its surface. According to the textbook's table, approximate values are caesium 2.14 eV, potassium 2.30 eV, sodium 2.75 eV, calcium 3.20 eV, aluminium 4.28 eV, copper 4.65 eV, silver 4.70 eV and platinum 5.65 eV. A metal with a small work function emits electrons more easily.
Worked example 1: work function and energy units
(a) Suppose (made-up values) the surface barrier of a metal is 4.2 eV and the fastest free electron inside already has 0.6 eV. The least extra energy needed is 4.2 − 0.6 = 3.6 eV: this is the work function. In joule, 3.6 × 1.602 × 10⁻¹⁹ = 5.77 × 10⁻¹⁹ J. (b) An electron accelerated through 150 V gains 150 eV = 150 × 1.602 × 10⁻¹⁹ = 2.40 × 10⁻¹⁷ J. (c) An energy of 8.0 × 10⁻¹⁹ J equals 8.0 × 10⁻¹⁹/1.602 × 10⁻¹⁹ = 4.99 eV ≈ 5.0 eV.
Four kinds of electron emission
Electron emission by the form of energy supplied
-
Thermionic emission
Heat gives free electrons enough energy; the number emitted depends on the metal and its temperature.
- Cathode ray tubes
- Electron microscopes
- X-ray tubes
-
Field emission
A very strong electric field pulls electrons over the barrier.
- Field emission scanning electron microscope
- Field-emission display
-
Photoelectric emission
Radiation of suitable frequency transfers energy to electrons; the number emitted depends on the intensity.
- Photodiodes
- Photoelectric cells
-
Secondary emission
Fast electrons striking a metal give their energy to its free electrons.
- Image intensifiers
- Photomultiplier tubes
Hertz, Hallwachs and Lenard
Hertz (1887). Maxwell's theory predicted electromagnetic waves. Hertz produced them with a spark between two metal spheres driven by an induction coil and detected them with a loop of copper wire in which a tiny spark jumped. Trying to see this faint spark better, he noticed that it became stronger when the detector was exposed to ultraviolet light. The reason, found later, was that ultraviolet light knocked electrons out of the metal. So the same experiment that confirmed light to be an electromagnetic wave gave the first evidence of its particle nature.
Hallwachs (1888). A clean zinc plate on an insulating stand was connected to a gold leaf electroscope. (a) An uncharged plate lit by ultraviolet light from an arc lamp became positively charged, and the leaves opened. (b) A negatively charged plate quickly lost its charge under ultraviolet light, and the leaves closed. (c) A positively charged plate became more positive, and the leaves opened further. Conclusion: ultraviolet light makes the zinc emit negative charges (electrons).
Lenard (1902). Two metal plates, A and C, were sealed in an evacuated quartz bulb (quartz lets ultraviolet light through) and connected to a battery and a galvanometer. When ultraviolet light fell on the negative plate C, the galvanometer showed a current; when it fell on the positive plate, there was none. Electrons ejected from C were attracted across the vacuum to the positive plate A, completing the circuit.
The ejection of electrons from a metal when it is illuminated by light or other electromagnetic radiation of suitable wavelength (frequency) is the photoelectric effect. The emitted electrons are ordinary electrons, called photoelectrons, and their current the photocurrent. Zinc, cadmium and magnesium respond only to ultraviolet light, while alkali metals such as lithium, sodium and caesium respond even to visible light. Materials that emit photoelectrons are photosensitive.
Work function φ₀ = least energy for an electron to escape the surface. 1 eV = 1.602 × 10⁻¹⁹ J. Photoelectric effect: radiation of suitable frequency ejects electrons from a surface.
Worked example 2: reading Hallwachs' results
A neutral zinc plate attached to an electroscope is lit by ultraviolet light and the leaves diverge. What charge does the plate carry? The plate loses electrons, so it is left positive. If the same experiment is done with a plate already charged negatively, the leaves collapse, because the light removes the excess electrons. If a sheet of ordinary glass (which absorbs ultraviolet light) is put in the beam, nothing happens: the effect needs ultraviolet light for zinc.
Key takeaways
- Free electrons are held in by the surface barrier; the work function is the least energy to free one.
- 1 eV = 1.602 × 10⁻¹⁹ J; metals with low work function emit more easily.
- Emission can be thermionic (heat), field (strong electric field), photoelectric (radiation) or secondary (fast electrons).
- Hertz saw UV strengthen a spark; Hallwachs showed UV removes negative charge from zinc; Lenard measured the resulting current in vacuum.
- Alkali metals respond to visible light; zinc, cadmium and magnesium need ultraviolet.
Check your understanding
-
1. An energy of 3.2 × 10⁻¹⁹ J expressed in electron volt is about:
- 5.1 eV
- 0.5 eV
- 2.0 eV
- 3.2 eV
Show answer
Answer: C. 3.2 × 10⁻¹⁹/1.602 × 10⁻¹⁹ = 2.0 eV.
-
2. The work function of a metal is:
- the energy of the fastest free electron inside the metal
- the least energy needed for an electron to escape from the surface
- the kinetic energy of an emitted photoelectron
- the energy of the incident photon
Show answer
Answer: B. The work function φ₀ is the minimum energy an electron must receive to cross the surface barrier and leave the metal.
-
3. Electrons emitted from the hot filament of an X-ray tube are an example of:
- field emission
- secondary emission
- photoelectric emission
- thermionic emission
Show answer
Answer: D. The filament is heated so that its free electrons gain enough thermal energy to escape: thermionic emission.
-
4. In Hallwachs' experiment, an uncharged zinc plate exposed to ultraviolet light becomes:
- positively charged
- negatively charged
- neutral and stays neutral
- magnetised
Show answer
Answer: A. Ultraviolet light ejects electrons from the zinc, so the plate is left with a net positive charge and the electroscope leaves open.
-
5. In Lenard's apparatus, a current flows only when ultraviolet light falls on the negative plate because:
- the positive plate absorbs the light
- electrons ejected from the negative plate are attracted to the positive plate
- the quartz bulb becomes conducting
- positive ions are emitted from the negative plate
Show answer
Answer: B. Light ejects electrons from the illuminated negative plate C; the positive plate A attracts them across the vacuum, completing the circuit. Electrons ejected from the positive plate would just be pulled back.
Sign in to keep track of the lessons you finish.