- Practice
- About 26 min
- 5 practice questions
Photons and Einstein's photoelectric equation
State Planck's quantum idea, list the properties of photons, derive and use Einstein's equation K_max = hν − φ₀, read the K_max-ν graph, and describe the photo emissive cell and its uses.
If something looks wrong, please tell us.
By the end of this lesson you can
- State Planck's hypothesis of quantised energy, E = nhν.
- List the characteristics of photons: E = hν = hc/λ, p = h/λ.
- Derive Einstein's equation hν = φ₀ + ½mv²_max and use the threshold relation hν₀ = φ₀.
- Interpret the K_max-ν graph (slope h, intercept −φ₀) and Millikan's verification.
- Describe the photo emissive cell and its applications, and explain the dual nature of light.
The failure of the wave theory was solved by a new idea: energy in radiation comes in fixed lumps. Planck introduced it for black body radiation; Einstein applied it to light itself.
Quantisation of energy (Planck, 1900)
To explain the radiation emitted by a black body, Planck proposed that matter contains atomic oscillators, each vibrating at its own frequency and emitting or absorbing radiation of that frequency. (i) An oscillator of frequency ν can have only discrete energies Eₙ = nhν, n = 1, 2, 3, ..., where h is Planck's constant (6.626 × 10⁻³⁴ J s). (ii) It emits or absorbs energy in packets (quanta) of size hν. So energy is quantised, not continuous.
Einstein's idea: photons
In 1905 Einstein proposed that the energy of light is not spread over the wavefront but concentrated in quanta. Light of frequency ν is a stream of quanta, each of energy E = hν, with momentum p = hν/c = h/λ. A quantum of light that behaves as a particle is a photon.
- A photon of frequency ν (wavelength λ) has energy E = hν = hc/λ.
- Photon energy depends on frequency, not on intensity. Intensity is the number of photons crossing unit area per unit time, each of the same energy (unit W m⁻²).
- Photons travel at the speed of light with momentum p = h/λ = hν/c.
- Photons are electrically neutral, so electric and magnetic fields do not deflect them.
- In a photon-electron collision, total energy, linear momentum and angular momentum are conserved, but the number of photons need not be (photons may be absorbed or created).
A handy number. With h = 6.626 × 10⁻³⁴ J s, c = 3 × 10⁸ m s⁻¹ and 1 eV = 1.602 × 10⁻¹⁹ J, hc = 1.988 × 10⁻²⁵ J m ≈ 1240 eV nm. So E (in eV) ≈ 1240/λ (in nm). For example, 500 nm light: E = 1240/500 = 2.48 eV.
Einstein's photoelectric equation
A photon of energy hν striking the metal is completely absorbed by a single electron. Part of the energy, φ₀, takes the electron over the surface barrier; the rest appears as its kinetic energy. By conservation of energy, hν = φ₀ + ½mv². An electron that loses no energy in collisions inside the metal comes out with the maximum kinetic energy, so K_max = hν − φ₀. If ν is reduced to the value ν₀ at which electrons are only just released (with zero kinetic energy), hν₀ = φ₀: this defines the threshold frequency, and the threshold wavelength λ₀ = c/ν₀ = hc/φ₀. The equation can be written hν = hν₀ + ½mv²_max.
Graph. K_max against ν is a straight line of slope h and K-intercept −φ₀, crossing the frequency axis at ν₀. Millikan plotted it for several metals and found parallel lines, all with the same slope h, which gave Planck's constant (h = 6.626 × 10⁻³⁴ J s) and the work functions, in agreement with Einstein. Since eV₀ = K_max, a V₀-ν graph has slope h/e.
Every law explained. (i) Each photon frees one electron, so more photons per second (brighter light) give more electrons and a larger current. (ii) K_max = hν − φ₀ depends on frequency, not intensity. (iii) If hν < φ₀ no electron can escape: hence the threshold frequency. (iv) The energy of a photon is passed to an electron at once: hence no time lag.
E = hν = hc/λ; p = h/λ; K_max = hν − φ₀ = eV₀; φ₀ = hν₀ = hc/λ₀; hc ≈ 1240 eV nm.
Worked example 1: will electrons come out?
(a) Light of 500 nm (2.48 eV per photon) falls on sodium (φ₀ = 2.75 eV) and on potassium (φ₀ = 2.30 eV). Sodium: 2.48 < 2.75, no emission. Potassium: K_max = 2.48 − 2.30 = 0.18 eV, so V₀ = 0.18 V. (b) Ultraviolet light of 250 nm falls on aluminium (φ₀ = 4.28 eV). Photon energy = 1240/250 = 4.96 eV. K_max = 4.96 − 4.28 = 0.68 eV, V₀ = 0.68 V. Threshold wavelength λ₀ = 1240/4.28 = 290 nm: any wavelength longer than about 290 nm cannot eject electrons from aluminium.
Worked example 2: photons per second and Planck's constant from data
(a) A 10 mW laser emits 620 nm light. Energy per photon E = hc/λ = 1.988 × 10⁻²⁵/(620 × 10⁻⁹) = 3.21 × 10⁻¹⁹ J. Photons per second n = P/E = 0.010/(3.21 × 10⁻¹⁹) = 3.1 × 10¹⁶ s⁻¹. (b) Made-up data for one metal: at ν₁ = 8.0 × 10¹⁴ Hz, V₀ = 1.30 V; at ν₂ = 6.0 × 10¹⁴ Hz, V₀ = 0.47 V. Subtracting eV₀ = hν − φ₀ for the two: e(1.30 − 0.47) = h(8.0 − 6.0) × 10¹⁴, so h = 1.602 × 10⁻¹⁹ × 0.83/(2.0 × 10¹⁴) = 6.6 × 10⁻³⁴ J s. Then φ₀ = hν₁ − eV₀ = (6.65 × 10⁻³⁴ × 8.0 × 10¹⁴)/(1.602 × 10⁻¹⁹) − 1.30 = 3.32 − 1.30 ≈ 2.0 eV.
Photo electric cells
A photo cell converts light energy into electrical energy. There are three kinds: (i) photo emissive cell, in which light makes a metal cathode emit electrons; (ii) photo voltaic cell, a semiconductor that produces a voltage proportional to the light; (iii) photo conductive cell, a semiconductor whose resistance changes with the light falling on it. Photo emissive cell: an evacuated glass or quartz bulb holds a semi-cylindrical cathode C coated with photosensitive material and a thin rod anode A along its axis, connected through a galvanometer to a battery. Light frees electrons from C, A collects them, and the current depends on the intensity of the light and the potential difference. Uses: automatic lights and street lights that switch on at dusk and off at dawn; reproducing sound from the sound track of motion pictures; timers that measure the speed of athletes in a race; exposure meters in photography.
Dual nature of light. Interference, diffraction and polarisation need a wave; black body radiation and the photoelectric effect need particles. Light behaves as a wave while travelling and as a particle when it interacts with matter. The two descriptions are complementary, and both are needed.
Key takeaways
- Planck: oscillator energy is quantised, Eₙ = nhν. Einstein: light itself comes as photons of energy hν.
- Einstein's equation K_max = hν − φ₀; threshold hν₀ = φ₀.
- K_max-ν graph: straight line, slope h (same for all metals), intercept −φ₀.
- hc ≈ 1240 eV nm gives photon energies quickly.
- Photo cells (emissive, voltaic, conductive) turn light into electrical signals.
Check your understanding
-
1. The energy of a photon of wavelength 310 nm is about:
- 2.5 eV
- 4.0 eV
- 3.1 eV
- 6.4 eV
Show answer
Answer: B. E = 1240/λ(nm) = 1240/310 = 4.0 eV.
-
2. In a K_max versus ν graph for different metals, which is the same for all metals?
- The intercept on the K axis
- The threshold frequency
- The slope
- The work function
Show answer
Answer: C. K_max = hν − φ₀. The slope is h, a universal constant, so all lines are parallel; the intercepts depend on each metal's work function.
-
3. A metal has work function 3.1 eV. Its threshold wavelength is about:
- 400 nm
- 310 nm
- 250 nm
- 620 nm
Show answer
Answer: A. λ₀ = hc/φ₀ = 1240/3.1 = 400 nm. Longer wavelengths cannot eject electrons.
-
4. Light of 248 nm falls on a surface of work function 3.0 eV. The stopping potential is:
- 5.0 V
- 8.0 V
- 3.0 V
- 2.0 V
Show answer
Answer: D. Photon energy = 1240/248 = 5.0 eV. K_max = 5.0 − 3.0 = 2.0 eV, so V₀ = 2.0 V.
-
5. Which statement about photons is correct?
- They are deflected by magnetic fields
- Their energy depends on intensity
- Their momentum is h/λ
- Their number is always conserved in collisions
Show answer
Answer: C. A photon's momentum is p = h/λ = hν/c. Photons are neutral (not deflected), their energy depends only on frequency, and they can be absorbed or created, so their number need not be conserved.
Sign in to keep track of the lessons you finish.