Revision notes

Unit 1 Measurement: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Physical quantities, units and the SI system

Physical quantities

  • Fundamental quantities
    • Length
    • Mass
    • Time
    • Temperature
    • Electric current
    • Luminous intensity
    • Amount of substance
  • Derived quantities
    • Area, volume
    • Density
    • Velocity, acceleration
    • Force, pressure
    • Energy (work)
    • Momentum
The seven SI base (fundamental) units
Fundamental quantityUnitSymbol
Lengthmetrem
Masskilogramkg
Timeseconds
TemperaturekelvinK
Electric currentampereA
Luminous intensitycandelacd
Amount of substancemolemol
Some derived quantities
QuantityExpressionSI unit
Arealength × breadthm²
Volumearea × heightm³
Densitymass ÷ volumekg m⁻³ (kg/m³)
Velocitydisplacement ÷ timem s⁻¹ (m/s)
Accelerationvelocity ÷ timem s⁻² (m/s²)
Momentummass × velocitykg m s⁻¹
Forcemass × accelerationkg m s⁻², called newton (N)
Pressureforce ÷ areaN m⁻², called pascal (Pa)
Energy (work)force × distanceN m, called joule (J)
Surface tensionforce ÷ lengthN m⁻¹

Every measurement = number × unit. Fundamental quantities stand alone; derived quantities are built from them. SI has seven base units: m, kg, s, K, A, cd, mol.

Key takeaways: a physical quantity is something measurable, and its value is a number with a unit. Fundamental quantities cannot be expressed through others; derived quantities can. SI, recommended in 1960, has seven base units from which every derived unit is made. Write symbols without plurals or full stops, with a space after the number, and capital letters only for units named after people.

Read the full lesson

Lesson 2

Length, mass, time and temperature: units, prefixes and very large or small values

Small units of length
UnitValue in metre
fermi (f)10⁻¹⁵ m
angstrom (Å)10⁻¹⁰ m
nanometre (nm)10⁻⁹ m
micron or micrometre (µm)10⁻⁶ m
millimetre (mm)10⁻³ m
centimetre (cm)10⁻² m
Common unit prefixes
PrefixSymbolPower of 10
petaP10¹⁵
teraT10¹²
gigaG10⁹
megaM10⁶
kilok10³
hectoh10²
decada10¹
decid10⁻¹
centic10⁻²
millim10⁻³
microµ10⁻⁶
nanon10⁻⁹

From tiny to huge lengths

  1. fermi 10⁻¹⁵ m: size of a nucleus
  2. angstrom 10⁻¹⁰ m: size of an atom
  3. metre 1 m: everyday objects
  4. kilometre 10³ m: roads and cities
  5. astronomical unit 1.496 × 10¹¹ m: Sun to Earth
  6. light year 9.46 × 10¹⁵ m
  7. parsec 3.08 × 10¹⁶ m

1 AU = 1.496 × 10¹¹ m; 1 ly = 9.46 × 10¹⁵ m; 1 pc = 3.26 ly. 1 Å = 10⁻¹⁰ m. 1 tonne = 10 quintals = 1000 kg. K = °C + 273.15.

Key takeaways: the SI units of length, mass, time and temperature are the metre, kilogram, second and kelvin. Astronomical unit, light year and parsec measure huge distances; fermi, angstrom, nanometre and micron measure tiny ones. Prefixes such as kilo, milli and micro stand for powers of ten, and scientific notation keeps very large and very small numbers short.

Read the full lesson

Lesson 3

The Vernier caliper: least count, zero error and correct reading

Positive and negative zero error (Vernier caliper)

  • Positive zero error
    • Vernier zero is to the RIGHT of main scale zero
    • Readings come out too large
    • Error = + (coinciding division × L.C.)
    • Zero correction is negative
  • Negative zero error
    • Vernier zero is to the LEFT of main scale zero
    • Readings come out too small
    • Count the coinciding division backward from 10
    • Error = − (10 − n) × L.C.; correction is positive

L.C. = one main scale division ÷ number of Vernier divisions = 0.01 cm. Correct reading = MSR + (VSC × L.C.) + zero correction, where zero correction = − zero error.

Key takeaways: the least count is the smallest length an instrument can measure. A Vernier caliper reads to 0.01 cm; its lower jaws measure outside sizes, its upper jaws inside sizes and its depth bar depths. Always check zero error with the jaws closed, then reverse its sign to get the zero correction.

Read the full lesson

Lesson 4

The screw gauge: pitch, least count and zero error

Zero error of a screw gauge

  • Positive zero error
    • Head scale zero is BELOW the pitch scale axis
    • Coinciding division n is read directly
    • Zero error = + (n × L.C.)
    • Zero correction is negative
  • Negative zero error
    • Head scale zero is ABOVE the pitch scale axis
    • Coinciding division n is near 100
    • Zero error = − (100 − n) × L.C.
    • Zero correction is positive

Measuring with a screw gauge

  1. Find pitch and L.C. Usually 1 mm and 0.01 mm
  2. Check zero error Spindle touching anvil
  3. Grip the object Turn by the ratchet only
  4. Read PSR Last mm mark visible on the pitch scale
  5. Read HSC Head scale division on the axis line
  6. Correct reading PSR + (HSC × L.C.) + zero correction

Pitch = distance moved ÷ rotations. L.C. = pitch ÷ head scale divisions = 0.01 mm. Correct reading = PSR + (HSC × L.C.) + zero correction.

Key takeaways: the screw gauge uses the steady advance of a screw to magnify tiny lengths. With a 1 mm pitch and 100 head divisions its least count is 0.01 mm. Find the zero error before measuring, and always turn by the ratchet so the object is not squeezed.

Read the full lesson

Lesson 5

Measuring mass, mass versus weight and accuracy

InstrumentHow it worksTypical use and accuracy
Common (beam) balanceCompares the object with standard masses (5 g up to 5 kg) placed on the other panShops; accurate to about 5 g
Physical balanceLike a beam balance but far more sensitive, kept in a glass case; standard masses from 10 mg upLaboratories; to about a milligram, as the textbook describes
Digital balanceElectronic sensor shows the mass on a displayJewellery shops and labs; least value about 10 mg
Spring balanceA spring stretches in proportion to the load; a pointer moves over a scaleMeasures weight (a force), in newtons

Mass versus weight

  • Mass
    • Amount of matter in a body
    • Fundamental quantity
    • Scalar: magnitude only
    • Same everywhere
    • Physical or beam balance
    • Unit: kilogram (kg)
  • Weight
    • Gravitational pull on the body
    • Derived quantity (a force)
    • Vector: has direction, downward
    • Changes from place to place
    • Spring balance
    • Unit: newton (N)

w = mg (g ≈ 9.8 m/s² on Earth, ≈ 1.63 m/s² on the Moon). Mass stays the same everywhere; weight changes with g.

Key takeaways: balances compare or sense mass with different accuracies; a spring balance measures weight using Hooke's law. Mass is the amount of matter, in kilograms, and never changes from place to place; weight is a force, in newtons, equal to mg. Accurate results need checked instruments, careful reading and the average of repeated readings.

Read the full lesson

Privacy · Terms · Refunds · Delivery