- Practice
- About 15 min
- 5 practice questions
Physical quantities, units and the SI system
Tell fundamental quantities from derived ones, name the seven SI base units, build derived units from them and write units the way the SI rules require.
If something looks wrong, please tell us.
By the end of this lesson you can
- Say what a physical quantity and a unit are.
- Sort quantities into fundamental and derived.
- Name the seven SI base units and their symbols.
- Write a derived unit from its defining expression.
- Apply the rules for writing SI units and symbols.
Measuring your height, buying a litre of milk or timing a friend's race all need a measurement. Unit 1 of the Tamil Nadu textbook for Std 9 Science opens by saying that measurement is finding the size or magnitude of a quantity by comparing it with a fixed standard. Every result has two parts: a number and a unit. In 3 kg of tomatoes, 3 is the numerical value and kilogram is the unit. A number without its unit means nothing: '3' could be 3 g or 3 tonnes.
Physical quantities: fundamental and derived
A physical quantity is anything that can be measured. The textbook divides them into two groups. Fundamental quantities cannot be expressed in terms of any other quantity: length, mass, time and temperature are examples. Derived quantities are built from fundamental ones by multiplying or dividing them: area is length × breadth, volume is area × height and density is mass ÷ volume.
Physical quantities
-
Fundamental quantities
- Length
- Mass
- Time
- Temperature
- Electric current
- Luminous intensity
- Amount of substance
-
Derived quantities
- Area, volume
- Density
- Velocity, acceleration
- Force, pressure
- Energy (work)
- Momentum
Units and systems of units
A unit is a standard amount of a quantity, fixed by law or agreement, with which unknown amounts are compared. Saying a rope is 10 m long means it is ten times the length called one metre. Units of fundamental quantities are fundamental units; units of derived quantities are derived units.
Earlier, countries used different systems. The CGS system used centimetre, gram and second; the FPS system used foot, pound and second; the MKS system used metre, kilogram and second. Trade and science across countries needed one common system, so the SI (International System of Units) was recommended in 1960 by the General Conference on Weights and Measures, which met in Paris. It is an improved form of the older systems and is used in almost every country.
| Fundamental quantity | Unit | Symbol |
|---|---|---|
| Length | metre | m |
| Mass | kilogram | kg |
| Time | second | s |
| Temperature | kelvin | K |
| Electric current | ampere | A |
| Luminous intensity | candela | cd |
| Amount of substance | mole | mol |
Building derived units
To find the unit of a derived quantity, write the expression that defines it and replace each quantity by its unit. Some derived units get their own name, usually after a scientist: the newton (N) for force, the pascal (Pa) for pressure and the joule (J) for energy.
| Quantity | Expression | SI unit |
|---|---|---|
| Area | length × breadth | m² |
| Volume | area × height | m³ |
| Density | mass ÷ volume | kg m⁻³ (kg/m³) |
| Velocity | displacement ÷ time | m s⁻¹ (m/s) |
| Acceleration | velocity ÷ time | m s⁻² (m/s²) |
| Momentum | mass × velocity | kg m s⁻¹ |
| Force | mass × acceleration | kg m s⁻², called newton (N) |
| Pressure | force ÷ area | N m⁻², called pascal (Pa) |
| Energy (work) | force × distance | N m, called joule (J) |
| Surface tension | force ÷ length | N m⁻¹ |
Worked example 1: the unit of density
Question: Find the SI unit of density and decide whether density is fundamental or derived. Working: density = mass ÷ volume. The unit of mass is kg and the unit of volume is m³, so the unit of density is kg ÷ m³ = kg/m³, also written kg m⁻³. Because it is built from mass and length, density is a derived quantity.
Worked example 2: the newton in base units
Question: Show that 1 N = 1 kg m s⁻². Working: force = mass × acceleration. The unit of mass is kg; acceleration = velocity ÷ time, so its unit is (m/s) ÷ s = m/s². Multiplying: kg × m/s² = kg m s⁻². This combination is named the newton, so 1 N = 1 kg m s⁻².
Rules for writing SI units and symbols
- A unit named after a scientist is written in full with a small first letter: newton, ampere, watt, kelvin.
- The symbol of such a unit takes a capital letter: N, A, W, K.
- Units not named after a person have small-letter symbols: m for metre, kg for kilogram, s for second.
- No full stop is put after a symbol (50 m, not 50 m.), unless the sentence ends there.
- Symbols have no plural: 10 kg, not 10 kgs.
- Kelvin temperatures have no degree sign (283 K); Celsius temperatures keep it (100 °C).
- Use at most one solidus (/) in a unit: m/s is fine, J/K/mol must be written J K⁻¹ mol⁻¹.
- Leave a space between the number and the unit: 15 kg, not 15kg.
- Use only the accepted symbols: A, not amp; s, not sec.
- Very large or very small values are written in scientific form, for example 1.36 × 10⁴ kg m⁻³ for the density of mercury.
Every measurement = number × unit. Fundamental quantities stand alone; derived quantities are built from them. SI has seven base units: m, kg, s, K, A, cd, mol.
Key takeaways: a physical quantity is something measurable, and its value is a number with a unit. Fundamental quantities cannot be expressed through others; derived quantities can. SI, recommended in 1960, has seven base units from which every derived unit is made. Write symbols without plurals or full stops, with a space after the number, and capital letters only for units named after people.
Check your understanding
-
1. Which of these is a derived quantity?
- Mass
- Time
- Volume
- Temperature
Show answer
Answer: C. Volume is area × height, that is length × length × length, so it is built from length and is derived. Mass, time and temperature cannot be expressed through other quantities, so they are fundamental.
-
2. What is the SI unit of luminous intensity?
- candela
- kelvin
- mole
- ampere
Show answer
Answer: A. The candela (cd) is the SI base unit of luminous intensity. Kelvin is for temperature, mole for amount of substance and ampere for electric current.
-
3. Which way of writing a measurement follows the SI rules?
- 25 Kgs
- 25 kg.
- 25 kg
- 25kg
Show answer
Answer: C. The symbol for kilogram is a small 'kg', with no plural 's', no full stop and a space after the number: 25 kg. The other three each break one of these rules.
-
4. Pressure is force ÷ area. Which unit is the same as the pascal?
- N m
- N m⁻²
- kg m s⁻¹
- N m⁻¹
Show answer
Answer: B. Force is in newtons and area in square metres, so pressure has unit N ÷ m² = N m⁻², which is named the pascal. N m is the joule, kg m s⁻¹ is the unit of momentum and N m⁻¹ is the unit of surface tension.
-
5. A student writes a temperature as '300° K'. What is the correct form?
- 300 °K
- 300 k
- 300 degrees K
- 300 K
Show answer
Answer: D. When temperature is in kelvin the degree sign is left out and the symbol is a capital K, because the unit is named after Lord Kelvin: 300 K.
Sign in to keep track of the lessons you finish.