- Practice
- About 15 min
- 5 practice questions
Measuring mass, mass versus weight and accuracy
Choose the right balance for a job, find weight from mass using w = mg, explain why mass stays the same on the Moon while weight changes, and improve accuracy.
If something looks wrong, please tell us.
By the end of this lesson you can
- Describe the beam balance, physical balance, digital balance and spring balance.
- State Hooke's law as used in a spring balance.
- Calculate weight from mass using w = mg.
- List the differences between mass and weight.
- Explain what accuracy means and how to improve it.
Gold is sold in grams and milligrams, medicines are dosed in milligrams, groceries are weighed in kilograms and cargo is counted in tonnes. One instrument cannot serve all of these, so different balances are used for small and large masses. In everyday speech we say 'weight' when we mean 'mass'; in science the two are different.
Instruments for mass and weight
| Instrument | How it works | Typical use and accuracy |
|---|---|---|
| Common (beam) balance | Compares the object with standard masses (5 g up to 5 kg) placed on the other pan | Shops; accurate to about 5 g |
| Physical balance | Like a beam balance but far more sensitive, kept in a glass case; standard masses from 10 mg up | Laboratories; to about a milligram, as the textbook describes |
| Digital balance | Electronic sensor shows the mass on a display | Jewellery shops and labs; least value about 10 mg |
| Spring balance | A spring stretches in proportion to the load; a pointer moves over a scale | Measures weight (a force), in newtons |
The spring balance works by Hooke's law: within limits, the extension of a spring is directly proportional to the load hung on it. Doubling the load doubles the stretch, so the scale can be marked evenly.
Mass and weight
Mass (m) is the quantity of matter in a body. Weight (w) is the force with which gravity pulls the body; when you stand on a floor, the floor pushes up with an equal force, and a spring balance's spring pulls up with an equal tension. That supporting force is what a weighing scale actually measures. Weight is given by w = m × g, where g is the acceleration due to gravity, about 9.8 m/s² on the Earth's surface.
Worked example 1: weight from mass
Question: Meena's mass is 45 kg. What is her weight on the Earth (g = 9.8 m/s²)? Working: w = mg = 45 × 9.8 = 441 N. Her mass is 45 kg; her weight is 441 newtons.
Worked example 2: on the Moon
Question: On the Moon g is about 1.63 m/s², roughly one-sixth of the Earth's value. A rover has a mass of 120 kg. Find its weight on the Earth and on the Moon. Working: On the Earth: 120 × 9.8 = 1176 N. On the Moon: 120 × 1.63 = 195.6 N, about one-sixth as much. Its mass is still 120 kg in both places, because the amount of matter has not changed.
Worked example 3: mass from weight
Question: A box weighs 196 N on the Earth. What is its mass? Working: m = w ÷ g = 196 ÷ 9.8 = 20 kg.
Mass versus weight
-
Mass
- Amount of matter in a body
- Fundamental quantity
- Scalar: magnitude only
- Same everywhere
- Physical or beam balance
- Unit: kilogram (kg)
-
Weight
- Gravitational pull on the body
- Derived quantity (a force)
- Vector: has direction, downward
- Changes from place to place
- Spring balance
- Unit: newton (N)
Accuracy in measurement
Accuracy is how close a measurement comes to the true value. It matters in science and engineering, and in daily life too: a jeweller must weigh gold exactly, and too much salt spoils a meal. Inaccurate values come from faulty instruments (such as a zero error) and human error (such as reading a scale at a slant). To improve accuracy, check the instrument first, choose one with a suitable least count, read scales with your eye straight in front of the mark, and repeat the measurement and take the average.
Worked example 4: averaging readings
Question (made-up readings): Four measurements of a pencil's length are 15.2 cm, 15.4 cm, 15.3 cm and 15.3 cm. What value should be reported? Working: Sum = 15.2 + 15.4 + 15.3 + 15.3 = 61.2 cm. Average = 61.2 ÷ 4 = 15.3 cm.
w = mg (g ≈ 9.8 m/s² on Earth, ≈ 1.63 m/s² on the Moon). Mass stays the same everywhere; weight changes with g.
Key takeaways: balances compare or sense mass with different accuracies; a spring balance measures weight using Hooke's law. Mass is the amount of matter, in kilograms, and never changes from place to place; weight is a force, in newtons, equal to mg. Accurate results need checked instruments, careful reading and the average of repeated readings.
Check your understanding
-
1. Which instrument measures weight rather than mass?
- Beam balance
- Physical balance
- Spring balance
- Digital balance
Show answer
Answer: C. A spring balance reads how far a spring stretches under the pull of gravity on the object, so it measures a force, the weight. Beam and physical balances compare masses directly.
-
2. A sack of rice has a mass of 25 kg. What is its weight on the Earth (g = 9.8 m/s²)?
- 25 N
- 2.55 N
- 34.8 N
- 245 N
Show answer
Answer: D. w = mg = 25 × 9.8 = 245 N. Dividing instead of multiplying gives about 2.55, which is wrong.
-
3. An astronaut goes from the Earth to the Moon. What happens?
- Mass and weight both stay the same
- Mass stays the same, weight decreases
- Mass decreases, weight stays the same
- Both decrease to one-sixth
Show answer
Answer: B. The amount of matter in the astronaut does not change, so mass is the same. The Moon's gravity is about one-sixth of the Earth's, so weight (mg) becomes about one-sixth.
-
4. A spring balance is accurate because the spring obeys Hooke's law. What does this law say?
- The extension of the spring is directly proportional to the load
- The spring breaks under any load
- The extension is the same for every load
- The extension halves when the load doubles
Show answer
Answer: A. Hooke's law: within limits, the stretch of a spring is directly proportional to the load. Double the load and the extension doubles, so the scale can have equal markings.
-
5. Which step does most to improve the accuracy of a measured length?
- Using a ruler with a broken zero end
- Reading the scale from one side
- Repeating the measurement and taking the average
- Measuring once quickly
Show answer
Answer: C. Repeating a measurement and averaging reduces the effect of random human errors. A broken zero end or a slanted view adds errors instead of removing them.
Sign in to keep track of the lessons you finish.