• Practice
  • About 14 min
  • 5 practice questions

Metals, non-metals, metalloids and alloys

Describe the properties of metals, non-metals and metalloids and where they lie in the periodic table, and explain what alloys are and their advantages, with examples.

If something looks wrong, please tell us.

By the end of this lesson you can

  • List the typical properties of metals.
  • Say how non-metals differ and where they are in the table.
  • Define metalloids with examples.
  • Explain what alloys and amalgams are and give their advantages.

The periodic table is not just a list: its regions tell you what kind of element you are dealing with. This lesson looks at the three broad types of elements and then at alloys - the mixtures of metals that make up most of the metal objects around you, from a brass lamp to a stainless-steel tumbler.

Metals

Metals are typically hard, shiny (lustrous), malleable (can be beaten into sheets), ductile (can be drawn into wires), fusible (can be melted) and good conductors of heat and electricity. Apart from mercury, which is a liquid, metals are solids at room temperature. Metals fill most of the periodic table:

  • Alkali metals: group 1, lithium to francium.
  • Alkaline earth metals: group 2, beryllium to radium.
  • Transition metals: groups 3 to 12, such as iron, copper and zinc.
  • p-block metals: aluminium, gallium, indium, thallium, tin, lead and bismuth.

Non-metals and metalloids

A non-metal lacks the properties of metals: non-metals are usually dull, brittle when solid, and poor conductors (graphite, a form of carbon, is an exception that conducts electricity). Examples are carbon, nitrogen, oxygen, phosphorus, sulphur, selenium, the halogens (fluorine, chlorine, bromine, iodine) and the noble gases. Apart from hydrogen, the non-metals are all in the p-block. Metalloids have properties of both metals and non-metals; examples are boron, silicon, germanium and arsenic. Silicon's in-between ability to conduct electricity is what makes it so useful in computer chips.

Metals, non-metals and metalloids

  • Metals
    • Shiny, malleable, ductile
    • Good conductors
    • Mostly solids (mercury liquid)
    • Left and centre of the table
  • Non-metals
    • Dull, brittle if solid
    • Poor conductors (graphite excepted)
    • Solids, liquid (bromine) or gases
    • Upper right of the table
  • Metalloids
    • Properties in between
    • Boron, silicon, germanium, arsenic
    • Along the border between the two

Worked example 1: classify from properties

Question: Element X is shiny, can be drawn into a wire and conducts electricity. Element Y is a yellow, brittle solid that does not conduct. Which is a metal? Working: shine, ductility and conduction are metallic properties, so X is a metal. Y's brittleness and lack of conduction mark it as a non-metal (sulphur fits this description).

Alloys

People were making bronze (copper and tin) as long ago as about 3500 BCE. An alloy is a mixture of two or more metals, made by mixing the molten metals thoroughly; sometimes a non-metal is added, as carbon is in steel. Most of the metallic materials we use today are alloys, because alloying usually gives more useful properties than the pure metals have. Brass, for example, is made from copper and zinc. An alloy in which one of the metals is mercury is called an amalgam.

Advantages of alloys

AdvantageExample
Resist corrosion, or corrode much lessStainless steel vessels do not rust easily
Harder and stronger than the pure metalGold mixed with copper is harder than pure gold, so it suits jewellery
Conduct less than the pure metalCopper conducts well; brass and bronze conduct less
Some melt at a lower temperatureSolder (lead and tin) melts at a lower temperature than either metal, so it is used to join wires

Worked example 2: how much gold in 22-carat?

Question: Pure gold is called 24 carat. What fraction of a 22-carat ornament is gold, and why is it not 24 carat? Working: gold fraction = 22 ÷ 24 = 11/12 ≈ 91.7%; the rest is usually copper or silver. Pure gold is too soft for ornaments, so alloying makes it harder and longer-lasting.

Metals: shiny, malleable, ductile, good conductors. Non-metals: dull, brittle, poor conductors. Metalloids: in between. Alloys are mixtures of metals that are usually harder and more corrosion-resistant than the pure metals.

Key takeaways: metals occupy most of the table (groups 1, 2, 3-12 and some p-block elements); non-metals are in the upper right (p-block, plus hydrogen); metalloids such as boron and silicon sit between. Alloys like brass, bronze, steel and solder are mixtures of metals with improved properties; an alloy with mercury is an amalgam.

Check your understanding

  1. 1. Which metal is a liquid at room temperature?

    1. Sodium
    2. Aluminium
    3. Mercury
    4. Copper
    Show answer

    Answer: C. Mercury is the only metal that is liquid at room temperature; the others are solids.

  2. 2. The property of a metal that lets it be drawn into a wire is

    1. ductility
    2. malleability
    3. lustre
    4. brittleness
    Show answer

    Answer: A. Ductility means a metal can be drawn into thin wires. Malleability means it can be beaten into sheets; lustre is shine.

  3. 3. Which of these is a metalloid?

    1. Neon
    2. Iodine
    3. Calcium
    4. Arsenic
    Show answer

    Answer: D. Arsenic, like boron, silicon and germanium, has properties of both metals and non-metals. Iodine and neon are non-metals; calcium is a metal.

  4. 4. Solder, an alloy of lead and tin, is used to join electric wires because

    1. it is harder than steel
    2. it melts at a lower temperature than lead or tin
    3. it does not conduct electricity
    4. it is a non-metal
    Show answer

    Answer: B. Solder has a lower melting point than each of its metals, so it can be melted easily to join wires without damaging them.

  5. 5. An alloy containing mercury is called

    1. an amalgam
    2. bronze
    3. brass
    4. solder
    Show answer

    Answer: A. When a metal is alloyed with mercury, the alloy is an amalgam. Bronze is copper and tin, brass is copper and zinc, and solder is lead and tin.

Privacy · Terms · Refunds · Delivery