- Practice
- About 17 min
- 5 practice questions
Generators, transformers and uses of electromagnets
Explain how ac and dc generators work, use the transformer equations for step-up and step-down transformers, and describe electromagnets in speakers, maglev trains and medical machines.
If something looks wrong, please tell us.
By the end of this lesson you can
- Describe the parts and working of an ac generator.
- Explain how a split-ring commutator makes a dc generator.
- Use Vs/Vp = Ns/Np and Is/Ip = Np/Ns for transformers.
- Explain why a transformer cannot work on dc.
- Describe how electromagnets work in a speaker, a maglev train and an MRI scanner.
Almost all the electricity we use is made by generators and reaches us through transformers. Both work by electromagnetic induction.
The ac generator
An ac generator has a rectangular coil ABCD, the armature, that can be rotated between the poles of a magnet by turning an axle from outside. The two ends of the coil are joined to two slip rings, S₁ and S₂, which turn with the coil. Two fixed carbon brushes, B₁ and B₂, press on the rings and pass the current to the outside circuit. As the coil rotates, the flux through it keeps changing, so a current is induced. During one half turn the induced current flows one way (ABCD) in the coil; during the next half turn it flows the other way (DCBA). So the current in the outside circuit reverses every half rotation: it is alternating current.
The dc generator
Replace the two slip rings with a split-ring commutator. Now each brush is always in contact with whichever side of the coil is moving up (or down) through the field. The current in the outer circuit therefore always flows the same way: a dc generator. A generator (dynamo) converts mechanical energy into electrical energy.
ac and dc generators
-
ac generator
- Two separate slip rings
- Each coil end always meets the same brush
- Output reverses every half turn
-
dc generator
- One split-ring commutator
- Connections swap every half turn
- Output flows one way
The transformer
A transformer changes a low alternating voltage into a high one, or a high one into a low one, using electromagnetic induction. It has a primary coil and a secondary coil, insulated from each other and wound on a soft iron core. The alternating current in the primary sets up a changing magnetic field in the core, and this changing flux induces an alternating e.m.f. in the secondary.
- Step-up transformer: more turns in the secondary than the primary (Ns > Np), so Vs > Vp. Used at power stations to raise the voltage for long-distance transmission.
- Step-down transformer: fewer turns in the secondary (Ns < Np), so Vs < Vp. Used to bring the voltage down for homes and in adaptors and chargers.
Vs/Vp = Ns/Np and, for an ideal transformer, Is/Ip = Np/Ns. Stepping up voltage steps down current, and stepping down voltage steps up current.
A transformer cannot work on dc. A steady current in the primary gives a steady flux, and a steady flux induces no e.m.f. in the secondary. Real transformers also lose some energy as heat and sound.
Worked example 1: a step-down transformer
Question: A transformer has 1000 turns in the primary and 50 in the secondary. The primary is connected to 220 V ac. Find the output voltage. Working: Vs = Vp × Ns/Np = 220 × 50/1000 = 220 ÷ 20 = 11 V. It is a step-down transformer.
Worked example 2: current in the secondary
Question: An ideal step-up transformer has Np = 200 and Ns = 2000. The primary current is 5 A. Find the secondary current. Working: Is = Ip × Np/Ns = 5 × 200/2000 = 0.5 A. The voltage is stepped up ten times, so the current is stepped down ten times.
Worked example 3: finding turns
Question: A charger must turn 220 V into 5.5 V. If its primary has 1200 turns, how many turns does the secondary need? Working: Ns = Np × Vs/Vp = 1200 × 5.5/220 = 1200 ÷ 40 = 30 turns.
Uses of electromagnets
- Loudspeaker: a coil (electromagnet) is placed in front of a fixed permanent magnet and attached to a light paper or plastic cone. The changing current of the signal keeps reversing the coil's field, so it is pulled and pushed by the permanent magnet and vibrates. The cone spreads the vibrations into the air as sound.
- Magnetic levitation (maglev) trains: one set of magnets repels the train upward so it floats above its guideway, and another set pushes it forward. With no wheels touching the track, there is very little friction, so very high speeds are possible.
- Medical equipment: strong electromagnets are used in magnetic resonance imaging (MRI) scanners, which make detailed images of the inside of the body; electromagnetism is also used in other scanners and some treatments.
Key takeaways: a generator turns mechanical energy into electrical energy; slip rings give ac and a split-ring commutator gives dc. A transformer changes ac voltage in the ratio of the turns, works only on ac and trades voltage for current. Electromagnets drive speakers, maglev trains and MRI scanners.
Check your understanding
-
1. Which part of an ac generator passes the current from the armature coil to the external circuit?
- Field magnet
- Split ring
- Iron core
- Brushes
Show answer
Answer: D. In an ac generator the slip rings turn with the coil, and the fixed brushes pressing on them carry the current out to the external circuit.
-
2. A transformer works on
- ac only
- dc only
- both ac and dc
- neither ac nor dc
Show answer
Answer: A. Induction needs a changing flux. Only ac in the primary produces a changing flux; a steady dc gives no induced e.m.f. in the secondary.
-
3. A transformer's primary has 800 turns and its secondary 8 turns. It is connected to 220 V ac. What is the output voltage?
- 22 000 V
- 22 V
- 2.2 V
- 0.22 V
Show answer
Answer: C. Vs = Vp × Ns/Np = 220 × 8/800 = 220 ÷ 100 = 2.2 V.
-
4. In a step-down transformer,
- the secondary has more turns than the primary
- the primary has more turns than the secondary
- both coils have the same number of turns
- there is no secondary coil
Show answer
Answer: B. To lower the voltage, the secondary must have fewer turns than the primary (Ns < Np), since Vs/Vp = Ns/Np.
-
5. A radio built to run on 6 V has a transformer so it can be used from the 220 V mains. What kind is it?
- Step-up, because the radio needs more current
- Step-up, because 6 V is more than 220 V
- No transformer can do this
- Step-down, because it lowers 220 V to about 6 V
Show answer
Answer: D. The transformer must reduce the mains voltage to the much lower voltage the radio needs, so it is a step-down transformer with fewer turns in the secondary.
Sign in to keep track of the lessons you finish.