- Practice
- About 15 min
- 5 practice questions
Magnets, magnetic field and magnetic field lines
Tell natural from artificial magnets, describe the magnetic field and its unit, list the properties of magnetic field lines and explain magnetic flux and flux density.
If something looks wrong, please tell us.
By the end of this lesson you can
- Tell natural magnets from artificial magnets.
- Define magnetic field and give its symbol and unit.
- Use a compass to find the direction of a magnetic field.
- List the properties of magnetic lines of force.
- Define magnetic flux and magnetic flux density with their units.
Magnets have fascinated people for centuries; sailors once used them to find direction at sea. Unit 5 of the Tamil Nadu textbook for Std 9 Science starts with magnets and their fields, then shows that electricity and magnetism are deeply linked.
Natural and artificial magnets
Natural magnets occur in nature, in certain rocks and sandy deposits. The strongest natural magnet is lodestone, a form of the iron ore magnetite; its magnetism is permanent, and lodestones were used to make the first compasses. Artificial magnets are made by people; the bar, horseshoe and ring magnets sold in shops are artificial.
Magnetic field
Slide a magnet slowly towards some paper clips on a table: at a certain distance the clips jump across and stick to it. The magnet acts on them before touching them. The magnetic field is the region around a magnet in which its magnetic force (attraction or repulsion) can be felt. It is denoted by B, and its SI unit is the tesla (T). The direction of the field at any point is the direction in which the north pole of a small compass needle placed there points. Magnetic fields pass through all kinds of materials, not just air. The Earth itself has a magnetic field, which is why a compass helps in navigation.
Magnetic field lines
A magnetic field line (magnetic line of force) is a curve drawn so that the tangent to it at any point gives the direction of the magnetic field there. It is the path a free north pole would tend to follow.
- Outside the magnet, field lines go from the north pole to the south pole; inside the magnet they continue from south to north.
- So they are closed, continuous curves that pass through the body of the magnet.
- Field lines never intersect; if two crossed, a compass at the crossing would have to point two ways at once.
- The field is strongest at the poles, where the lines are crowded, and weaker near the middle of the magnet.
- The tangent at any point of a field line gives the field's direction at that point.
Magnetic flux and flux density
Magnetic flux (ϕ) is the number of magnetic field lines passing through a given area. Its unit is the weber (Wb). Magnetic flux density is the number of field lines crossing unit area held normal (at right angles) to the lines: flux density = flux ÷ area. Its unit is Wb/m², which is the same as the tesla, so flux density is a measure of the field's strength B.
Worked example 1: flux density
Question: A flux of 0.006 Wb passes normally through a loop of area 0.03 m². Find the flux density. Working: B = ϕ ÷ A = 0.006 ÷ 0.03 = 0.2 Wb/m² = 0.2 T.
Worked example 2: flux through a larger area
Question: In a uniform field of 0.5 T, what flux passes normally through a square coil of side 20 cm? Working: Area = 0.2 × 0.2 = 0.04 m². ϕ = B × A = 0.5 × 0.04 = 0.02 Wb.
Describing a magnetic field
-
Magnetic field B
- Region where magnetic force is felt
- Unit: tesla (T)
- Direction: where a compass N pole points
-
Magnetic flux ϕ
- Number of field lines through an area
- Unit: weber (Wb)
-
Flux density
- Field lines per unit normal area
- Unit: Wb/m² (= T)
Some animals seem to sense the Earth's magnetic field. Research suggests that certain sea turtles can detect differences in the field and use them to find the beach where they hatched.
Field lines: N to S outside, S to N inside, closed, never crossing, crowded where the field is strong. Flux in Wb; flux density in Wb/m² = tesla.
Key takeaways: a magnetic field surrounds every magnet and is measured in tesla. Field lines are closed curves that never cross and show direction by their tangent. Flux counts the lines through an area; flux density counts them per unit area.
Check your understanding
-
1. What is the SI unit of magnetic field (magnetic induction) B?
- weber
- tesla
- ampere
- volt
Show answer
Answer: B. Magnetic field B is measured in tesla (T), which equals Wb/m². The weber is the unit of magnetic flux.
-
2. Why can two magnetic field lines never intersect?
- Because they are always straight
- Because they exist only inside magnets
- Because at a crossing the field would have two directions at once
- Because they repel each other strongly
Show answer
Answer: C. The tangent to a field line gives the field's direction. At a crossing there would be two tangents, meaning two directions at one point, which is impossible.
-
3. Outside a bar magnet, magnetic field lines run
- from the north pole to the south pole
- from the south pole to the north pole
- only around the middle
- in straight lines away from both poles
Show answer
Answer: A. Outside the magnet the lines leave the north pole and enter the south pole; inside they continue from south to north, making closed loops.
-
4. The unit of magnetic flux density is
- weber
- weber metre
- weber per metre
- weber per square metre
Show answer
Answer: D. Flux density = flux ÷ area, so its unit is Wb/m², which is the tesla.
-
5. A flux of 0.012 Wb passes normally through an area of 0.04 m². What is the flux density?
- 0.00048 T
- 0.3 T
- 3.33 T
- 0.052 T
Show answer
Answer: B. Flux density = ϕ ÷ A = 0.012 ÷ 0.04 = 0.3 Wb/m² = 0.3 T. Multiplying instead gives 0.00048, which is not a flux density.
Sign in to keep track of the lessons you finish.