- Foundation
- About 20 min
- 5 practice questions
Heat capacity, calorimetry and standard enthalpies
Use q = CΔT and Cp − Cv = R, explain how bomb and coffee-cup calorimeters measure ΔU and ΔH, and work with standard states, enthalpies of phase change, enthalpies of formation and thermochemical equations.
If something looks wrong, please tell us.
By the end of this lesson you can
- Use heat capacity, molar heat capacity and specific heat in q = CΔT = c m ΔT.
- Derive Cp − Cv = R for an ideal gas.
- Explain how ΔU is measured in a bomb calorimeter and ΔH at constant pressure.
- Define standard state, ΔfusH, ΔvapH, ΔsubH and ΔfH°, and calculate ΔrH° from enthalpies of formation.
To use the first law we must measure heat. Heat entering a system usually shows up as a rise in temperature, so the key is knowing how much heat a sample needs per degree. That quantity, the heat capacity, is the basis of calorimetry, the experimental side of this chapter.
Heat capacity and specific heat
The temperature rise is proportional to the heat supplied: q = C ΔT, where C is the heat capacity (unit J K⁻¹). A large C means a lot of heat gives only a small temperature rise; water has a large heat capacity. C is extensive, so we also use the molar heat capacity Cm = C/n (J mol⁻¹ K⁻¹) and the specific heat c, the heat needed to raise 1 g (or 1 kg) by 1 K. A change of 1 K equals a change of 1 °C, so ΔT has the same value on both scales.
q = C ΔT = n Cm ΔT = c m ΔT
Worked example 1: warming iron
How much heat raises 2.00 mol of iron from 20 °C to 70 °C? Take Cm(Fe) = 25.1 J mol⁻¹ K⁻¹. ΔT = 50 K. q = n Cm ΔT = 2.00 × 25.1 × 50 = 2510 J ≈ 2.51 kJ.
Cp and Cv for an ideal gas
At constant volume qV = Cv ΔT = ΔU; at constant pressure qp = Cp ΔT = ΔH. For one mole of ideal gas, ΔH = ΔU + Δ(pV) = ΔU + Δ(RT) = ΔU + RΔT. Substituting: Cp ΔT = Cv ΔT + RΔT, so Cp − Cv = R. Cp is larger because at constant pressure part of the heat is spent pushing back the surroundings as the gas expands.
Calorimetry: measuring ΔU and ΔH
In calorimetry a process is carried out in a vessel (the calorimeter) whose heat capacity is known, and the heat is found from the temperature change. Heat released by the reaction equals heat gained by the calorimeter, with the opposite sign: q(reaction) = −C(calorimeter) × ΔT.
Two kinds of calorimeter
-
Bomb calorimeter
- Sealed steel bomb in a water bath
- Substance burnt in pure oxygen
- Volume constant, so no pV work
- Measures qV = ΔU
-
Constant-pressure calorimeter
- Open to the atmosphere
- Used for reactions in solution
- Pressure constant
- Measures qp = ΔH (heat of reaction)
Worked example 2: a bomb calorimeter run
0.0200 mol of methane is burnt in a bomb calorimeter of heat capacity 10.0 kJ K⁻¹; the temperature rises by 1.77 K. Heat gained by the calorimeter = 10.0 × 1.77 = 17.7 kJ, so q(reaction) = −17.7 kJ. Per mole: ΔU = −17.7 ÷ 0.0200 = −885 kJ mol⁻¹. For CH₄(g) + 2O₂(g) → CO₂(g) + 2H₂O(l), Δng = −2, so ΔH = ΔU + ΔngRT = −885 + (−2 × 8.314 × 298 × 10⁻³) = −885 − 4.96 ≈ −890 kJ mol⁻¹.
Standard states and phase changes
ΔH depends on conditions, so values are quoted for standard states: the pure form of a substance at 1 bar and the stated temperature (usually 298 K). Standard values carry the symbol ° (ΔH°). Phase changes happen at constant temperature and absorb heat on the way to the less ordered phase, so these enthalpies are positive: ΔfusH (melting one mole of solid; for ice 6.00 kJ mol⁻¹ at 273 K), ΔvapH (vaporising one mole of liquid; for water 40.79 kJ mol⁻¹ at 373 K) and ΔsubH (solid directly to vapour). The reverse change releases the same amount. Stronger intermolecular forces mean larger values: water, with hydrogen bonds, needs more heat per mole to vaporise than acetone.
Worked example 3: melting and warming
Find the heat to turn 36 g of ice at 0 °C into water at 25 °C. n = 36 ÷ 18 = 2.0 mol. Melting: 2.0 × 6.00 = 12.0 kJ. Warming the liquid (Cm = 75.3 J mol⁻¹ K⁻¹): 2.0 × 75.3 × 25 = 3765 J ≈ 3.77 kJ. Total ≈ 15.8 kJ.
Standard enthalpy of formation
The standard molar enthalpy of formation, ΔfH°, is the enthalpy change when one mole of a compound forms from its elements in their reference states (most stable form at 25 °C and 1 bar: H₂(g), O₂(g), C(graphite), S(rhombic), Br₂(l)). By convention ΔfH° of an element in its reference state is zero. An equation that forms the compound from other compounds, or forms two moles of it, does not give ΔfH° directly.
A thermochemical equation is a balanced equation with states and its ΔrH. Its coefficients are moles; ΔrH (in kJ mol⁻¹, per mole of reaction as written) doubles if the equation is doubled and changes sign if it is reversed. With ΔfH° values, any reaction enthalpy follows from:
ΔrH° = Σ ai ΔfH°(products) − Σ bi ΔfH°(reactants), where a and b are the stoichiometric coefficients
Worked example 4: oxidising ammonia
Find ΔrH° for 4NH₃(g) + 5O₂(g) → 4NO(g) + 6H₂O(g). Data (kJ mol⁻¹): ΔfH° NH₃(g) = −46.1, NO(g) = +90.25, H₂O(g) = −241.8, O₂(g) = 0. Products: 4(90.25) + 6(−241.8) = 361.0 − 1450.8 = −1089.8. Reactants: 4(−46.1) + 0 = −184.4. ΔrH° = −1089.8 − (−184.4) = −905.4 kJ mol⁻¹ (strongly exothermic).
Key takeaways
- q = CΔT = nCmΔT = cmΔT; for an ideal gas Cp − Cv = R.
- A bomb calorimeter (constant volume) gives ΔU; a constant-pressure calorimeter gives ΔH.
- Standard state: pure substance at 1 bar; ΔfusH, ΔvapH and ΔsubH are positive.
- ΔfH° of an element in its reference state is zero.
- ΔrH° = Σ ΔfH°(products) − Σ ΔfH°(reactants), each multiplied by its coefficient.
Check your understanding
-
1. How much heat is needed to raise 2.0 mol of a substance with Cm = 30 J mol⁻¹ K⁻¹ through 10 K?
- 60 J
- 150 J
- 300 J
- 600 J
Show answer
Answer: D. q = n Cm ΔT = 2.0 × 30 × 10 = 600 J.
-
2. Which equation shows a standard enthalpy of formation?
- H₂(g) + Br₂(l) → 2HBr(g)
- CaO(s) + CO₂(g) → CaCO₃(s)
- ½N₂(g) + 3/2 H₂(g) → NH₃(g)
- C(diamond) + O₂(g) → CO₂(g)
Show answer
Answer: C. ΔfH° needs one mole of compound made from elements in their reference states. The HBr equation makes two moles; the CaCO₃ equation starts from compounds; diamond is not the reference state of carbon. Only the ammonia equation qualifies.
-
3. A bomb calorimeter directly measures which quantity for a combustion reaction?
- ΔU, because the volume is constant
- ΔH, because the pressure is constant
- ΔS, because the walls are insulated
- ΔG, because the temperature is constant
Show answer
Answer: A. The sealed bomb keeps volume constant, so no pV work is done and the heat measured is qV = ΔU. ΔH is then found from ΔH = ΔU + ΔngRT.
-
4. Assertion (A): The standard enthalpy of formation of liquid water is negative. Reason (R): The standard state of a substance is its pure form at 1 bar and the stated temperature.
- Both A and R are true, and R is the correct explanation of A
- Both A and R are true, but R is not the correct explanation of A
- A is true, but R is false
- A is false, but R is true
Show answer
Answer: B. A is true: forming water from H₂ and O₂ releases heat (ΔfH° = −285.8 kJ mol⁻¹). R is a true definition, but it only says what conditions the value refers to; it does not explain why the reaction is exothermic. So both are true, but R does not explain A.
-
5. Using ΔfH° (kJ mol⁻¹): CH₄(g) = −74.8, CO₂(g) = −393.5, H₂O(l) = −285.8, find ΔrH° for CH₄(g) + 2O₂(g) → CO₂(g) + 2H₂O(l).
- −604.5 kJ mol⁻¹
- −890.3 kJ mol⁻¹
- −1039.9 kJ mol⁻¹
- −754.1 kJ mol⁻¹
Show answer
Answer: B. Products: −393.5 + 2(−285.8) = −965.1. Reactants: −74.8 + 2(0) = −74.8. ΔrH° = −965.1 − (−74.8) = −890.3 kJ mol⁻¹.
Sign in to keep track of the lessons you finish.