- Foundation
- About 20 min
- 5 practice questions
Pressure-volume work and enthalpy
Derive w = −pexΔV, compare irreversible and reversible isothermal work, define enthalpy H = U + pV, relate ΔH and ΔU through ΔngRT, and tell extensive from intensive properties.
If something looks wrong, please tell us.
By the end of this lesson you can
- Derive w = −pexΔV and use it for expansion and compression.
- Calculate reversible isothermal work, w(rev) = −2.303 nRT log(Vf/Vi), and explain free expansion.
- Define enthalpy and show that ΔH = qp at constant pressure.
- Use ΔH = ΔU + ΔngRT and classify properties as extensive or intensive.
Many reactions produce or use up gases, so the system can push back the atmosphere or be squeezed by it. This mechanical pressure-volume (pV) work is the only kind of work we consider in this chapter. Linking it to the first law leads to enthalpy, the quantity chemists use most often.
Work done by a constant external pressure
Take an ideal gas in a cylinder with a frictionless, weightless piston of area A. A constant external pressure pex pushes the piston in through a distance l. Force on the piston = pex × A, so the work done on the gas = force × distance = pex × A × l. The volume change is ΔV = Vf − Vi = −(A × l), negative for compression. Hence:
w = −pex ΔV = −pex (Vf − Vi) (IUPAC: w is work done on the system)
Check the sign: in compression Vf < Vi, so ΔV is negative and w comes out positive (work done on the gas). In expansion ΔV is positive and w is negative (the gas does work). If the external pressure changes in several finite steps, the work is the sum over the steps, w = −Σ pex ΔV. On a p-V graph the magnitude of the work is the area under the external-pressure line.
Reversible processes and isothermal work
A process is reversible if it proceeds through a series of near-equilibrium states, so that an infinitesimal change in conditions could reverse it at any moment. During reversible expansion pex is always only infinitesimally less than the gas pressure; during reversible compression only infinitesimally more. Then pex can be replaced by the gas pressure p, and w(rev) = −∫p dV from Vi to Vf. For n mol of ideal gas at constant temperature (isothermal), p = nRT/V, and the integral gives:
w(rev, isothermal) = −nRT ln(Vf/Vi) = −2.303 nRT log(Vf/Vi)
All other processes are irreversible. Expansion into a vacuum (pex = 0) is free expansion: no work is done, w = 0. Joule also found q = 0 for the free expansion of an ideal gas, so ΔU = 0. More generally, the internal energy of an ideal gas depends only on its temperature, so in any isothermal change of an ideal gas ΔU = 0 and q = −w.
| Process | Condition | Result |
|---|---|---|
| Constant volume | ΔV = 0, so w = 0 | ΔU = qV |
| Adiabatic | q = 0 | ΔU = w(ad) |
| Isothermal, irreversible | ΔU = 0 | q = −w = pex(Vf − Vi) |
| Isothermal, reversible | ΔU = 0 | q = −w = 2.303 nRT log(Vf/Vi) |
| Free expansion | pex = 0 | w = 0, q = 0, ΔU = 0 |
Worked example 1: one-step versus reversible expansion
2.0 mol of an ideal gas at 300 K expands isothermally from 10.0 L to 20.0 L. Take R = 8.314 J mol⁻¹ K⁻¹ and 1 L atm = 101.3 J. (a) Against a constant pex = 1.00 atm, with a stop holding the piston at 20.0 L: w = −pexΔV = −1.00 atm × 10.0 L = −10.0 L atm = −10.0 × 101.3 J = −1013 J. Since ΔU = 0, q = +1013 J. (b) Reversibly: w = −2.303 × 2.0 × 8.314 × 300 × log 2 = −2.303 × 4988.4 × 0.3010 ≈ −3458 J, so q ≈ +3.46 kJ. The reversible path extracts the most work, because the gas always pushes against the largest pressure it can.
Enthalpy: a state function for constant pressure
At constant volume, ΔU = qV. But most reactions run in open flasks at constant atmospheric pressure. There, with only pV work, ΔU = qp − pΔV. Writing states 1 and 2: U₂ − U₁ = qp − p(V₂ − V₁), which rearranges to qp = (U₂ + pV₂) − (U₁ + pV₁). This suggests a new state function, the enthalpy, H = U + pV. Then qp = H₂ − H₁ = ΔH. Because U, p and V are state functions, H is one too, so qp, measured at constant pressure, is path-independent.
H = U + pV; at constant pressure ΔH = ΔU + pΔV = qp. ΔH < 0: exothermic; ΔH > 0: endothermic.
Relating ΔH and ΔU for reactions with gases
For solids and liquids the volume barely changes, so ΔH ≈ ΔU. With gases, use the ideal gas law at constant p and T: pV(A) = n(A)RT for gaseous reactants and pV(B) = n(B)RT for gaseous products. Subtracting, pΔV = (n(B) − n(A))RT = ΔngRT, where Δng = moles of gaseous products − moles of gaseous reactants. Therefore ΔH = ΔU + ΔngRT. Count only gases: liquids and solids are left out of Δng.
Worked example 2: from ΔU to ΔH
For C₃H₈(g) + 5O₂(g) → 3CO₂(g) + 4H₂O(l), suppose ΔU = −2213 kJ mol⁻¹ at 298 K. Δng = 3 − (1 + 5) = −3 (water is liquid, so it is not counted). ΔngRT = −3 × 8.314 J mol⁻¹ K⁻¹ × 298 K = −7433 J mol⁻¹ = −7.43 kJ mol⁻¹. ΔH = −2213 + (−7.43) ≈ −2220 kJ mol⁻¹. ΔH is more negative than ΔU because the atmosphere does work on the shrinking gas.
Extensive and intensive properties
An extensive property depends on how much matter is present: mass, volume, U, H and heat capacity. An intensive property does not: temperature, pressure, density. If a box of gas is divided into two halves by a partition, each half has half the volume (extensive) but the same temperature (intensive). Dividing an extensive property by the amount gives a molar property, which is intensive, for example molar volume Vm = V/n.
Extensive versus intensive
-
Extensive
- Doubles when the sample is doubled
- Mass, volume, U, H, heat capacity C
- Can be added for parts of a system
-
Intensive
- Same for any amount of sample
- Temperature, pressure, density
- Molar quantities such as Vm and Cm
Key takeaways
- w = −pexΔV; compression gives w > 0, expansion gives w < 0.
- Reversible isothermal work: w = −2.303 nRT log(Vf/Vi); free expansion does no work.
- For an ideal gas at constant T, ΔU = 0 and q = −w.
- H = U + pV is a state function; ΔH = qp at constant pressure.
- ΔH = ΔU + ΔngRT, counting gaseous species only.
Check your understanding
-
1. A gas is compressed from 6.0 L to 2.0 L by a constant external pressure of 3.0 atm. What is the work done on the gas?
- −12 L atm
- +18 L atm
- +12 L atm
- Zero
Show answer
Answer: C. w = −pexΔV = −3.0 atm × (2.0 − 6.0) L = −3.0 × (−4.0) = +12 L atm (about +1.22 kJ, using 1 L atm = 101.3 J). The positive sign shows work is done on the gas.
-
2. An ideal gas expands isothermally into a vacuum. Which set of values is correct?
- w = 0, q = 0, ΔU = 0
- w < 0, q > 0, ΔU = 0
- w = 0, q > 0, ΔU > 0
- w < 0, q = 0, ΔU < 0
Show answer
Answer: A. Into a vacuum pex = 0, so w = −pexΔV = 0. For an isothermal change of an ideal gas ΔU = 0, and then q = ΔU − w = 0.
-
3. For CH₄(g) + 2O₂(g) → CO₂(g) + 2H₂O(l) at 298 K, what is ΔH − ΔU? (R = 8.314 J mol⁻¹ K⁻¹)
- +4.96 kJ mol⁻¹
- Zero
- −2.48 kJ mol⁻¹
- −4.96 kJ mol⁻¹
Show answer
Answer: D. Δng = 1 − 3 = −2 (liquid water is not counted). ΔH − ΔU = ΔngRT = −2 × 8.314 × 298 J mol⁻¹ = −4955 J mol⁻¹ ≈ −4.96 kJ mol⁻¹.
-
4. Assertion (A): For the isothermal expansion of an ideal gas, ΔU = 0. Reason (R): In an isothermal process no heat is exchanged with the surroundings.
- Both A and R are true, and R is the correct explanation of A
- Both A and R are true, but R is not the correct explanation of A
- A is true, but R is false
- A is false, but R is true
Show answer
Answer: C. A is true: the internal energy of an ideal gas depends only on temperature, which stays constant. R is false: in isothermal expansion the gas absorbs heat (q = −w > 0) to keep its temperature steady. The process with q = 0 is adiabatic, not isothermal.
-
5. 1.0 mol of an ideal gas doubles its volume reversibly and isothermally at 300 K. What is w? (R = 8.314 J mol⁻¹ K⁻¹, log 2 = 0.3010)
- +1.73 kJ
- −1.73 kJ
- −0.75 kJ
- −3.46 kJ
Show answer
Answer: B. w = −2.303 nRT log(Vf/Vi) = −2.303 × 1.0 × 8.314 × 300 × 0.3010 ≈ −1729 J ≈ −1.73 kJ. It is negative because the gas does work as it expands.
Sign in to keep track of the lessons you finish.