• Foundation
  • About 18 min
  • 5 practice questions

System, surroundings and the first law of thermodynamics

Name the parts of a thermodynamic system, tell open, closed and isolated systems apart, explain state functions, internal energy, heat and work, and apply ΔU = q + w with the IUPAC sign convention.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Define system, surroundings and boundary, and classify a system as open, closed or isolated.
  • Explain what a state function is and why U, p, V and T are state functions while q and w are not.
  • State the IUPAC sign convention for heat and work.
  • State the first law of thermodynamics and use ΔU = q + w in calculations.

When cooking gas burns, chemical energy turns into heat; when a dry cell runs a torch, it turns into electrical energy. Thermodynamics is the study of such energy changes. It deals with large (macroscopic) collections of molecules and looks only at the starting and finishing states of a change, not at how fast the change happens or what route the molecules take. Its laws apply to systems at equilibrium, or moving from one equilibrium state to another. With it we can answer three practical questions: how much energy a reaction gives out or takes in, whether it can happen on its own, and how far it will go.

System, surroundings and boundary

The system is the part of the universe we choose to study, for example the reacting mixture in a beaker. Everything else that can exchange energy or matter with it is the surroundings (in practice, the nearby region, such as the room). The real or imaginary wall separating them is the boundary. Together, system + surroundings = universe.

Systems are classified by what can cross the boundary:

Types of thermodynamic system

  • Open system
    • Exchanges both matter and energy
    • Example: water boiling in an uncovered pan
  • Closed system
    • Exchanges energy but not matter
    • Example: reactants sealed in a steel or copper vessel
  • Isolated system
    • Exchanges neither matter nor energy
    • Example (ideal): contents of a well-sealed vacuum flask
What can cross the boundary decides the type.

State of a system and state functions

A system is described by measurable bulk properties: pressure p, volume V, temperature T, amount n and composition. Once a few of these are fixed, the rest have definite values. A quantity whose value depends only on the present state, and not on how the system reached that state, is a state function (state variable). p, V, T and U are state functions. If water is warmed from 25 °C to 35 °C, ΔT = +10 °C whether it was heated directly or cooled first and then heated; the change depends only on the end points.

Internal energy, work and heat

The internal energy U is the total energy stored in the system: kinetic energy of moving particles, energy of chemical bonds and intermolecular attractions, and so on. We can never know the absolute value of U, but we can measure its change, ΔU = U(final) − U(initial). U changes in three ways: heat flows in or out, work is done on or by the system, or matter enters or leaves.

Joule's experiments showed that if a system is enclosed in adiabatic walls (no heat can pass), the same amount of work, whether by stirring paddles or by an electric heater, always produces the same change of state. So the adiabatic work equals a change in a state function: ΔU = w(ad). A process with no heat exchange is an adiabatic process. If instead the change is brought about only by heat through conducting walls at constant volume, ΔU = q. Heat is energy transferred because of a temperature difference; work is energy transferred by any other means (for example, a moving piston).

The IUPAC sign convention used in chemistry

NCERT chemistry follows the IUPAC convention: every quantity is counted from the system's point of view. Energy that enters the system is positive; energy that leaves is negative.

IUPAC sign convention (used throughout this course)
ProcessSignEffect on U
Heat absorbed by the systemq > 0U increases
Heat released by the systemq < 0U decreases
Work done ON the system (e.g. compression)w > 0U increases
Work done BY the system (e.g. expansion)w < 0U decreases

Physics books often use an older convention in which w means work done by the system, so the first law appears there as ΔU = q − w. Both describe the same physics; in this chemistry course w always means work done on the system.

The first law of thermodynamics

When a change involves both heat and work, ΔU = q + w. Different routes between the same two states can split the energy differently between q and w, so q and w are path functions, but their sum is fixed because ΔU depends only on the end states. For an isolated system q = 0 and w = 0, so ΔU = 0.

First law: ΔU = q + w. The energy of an isolated system is constant; energy can be neither created nor destroyed, only transferred or changed in form.

— Sign convention: IUPAC (energy into the system is positive)

Worked example 1: heat in, work out

A gas absorbs 500 J of heat and pushes a piston out, doing 200 J of work on the surroundings. Find ΔU. Heat enters, so q = +500 J. The gas does work, so w = −200 J. ΔU = q + w = 500 + (−200) = +300 J. The internal energy rises by 300 J.

Worked example 2: heat out, work in

A gas is compressed: 400 J of work is done on it while it loses 150 J of heat to the surroundings. q = −150 J, w = +400 J. ΔU = −150 + 400 = +250 J.

Worked example 3: same change, different path

A gas goes from state X to state Y along path 1 with q = +80 J and w = −30 J. Along path 2 it absorbs only 20 J of heat. What is w on path 2? ΔU(X→Y) = 80 + (−30) = +50 J on any path, because U is a state function. On path 2: 50 = 20 + w, so w = +30 J (work is done on the gas). The heat and work changed with the path; ΔU did not.

State functions and path functions

  • State functions
    • Depend only on the present state
    • Change fixed by start and end states
    • Examples: U, H, p, V, T
    • ΔU is the same on every path
  • Path functions
    • Depend on how the change is made
    • Not properties of a single state
    • Examples: q and w
    • Only their sum q + w is path-independent

Key takeaways

  • System + surroundings = universe; the boundary may be real or imaginary.
  • Open: matter and energy cross; closed: energy only; isolated: neither.
  • U, p, V, T are state functions; q and w are path functions.
  • IUPAC convention: heat absorbed and work done on the system are positive.
  • First law: ΔU = q + w; for an adiabatic change ΔU = w(ad); for an isolated system ΔU = 0.

Check your understanding

  1. 1. Reactants sealed inside a closed steel bomb that is placed in a water bath form which kind of system?

    1. Open system
    2. Isolated system
    3. Closed system
    4. A system with no boundary
    Show answer

    Answer: C. Steel conducts heat, so energy can pass to the water bath, but the sealed bomb lets no matter in or out. Energy exchange without matter exchange makes it a closed system.

  2. 2. A system absorbs 250 J of heat and does 100 J of work on its surroundings. What is ΔU (IUPAC convention)?

    1. +350 J
    2. +150 J
    3. −150 J
    4. −350 J
    Show answer

    Answer: B. q = +250 J (heat absorbed); w = −100 J (work done by the system). ΔU = q + w = 250 − 100 = +150 J.

  3. 3. Which one of the following is NOT a state function?

    1. Heat, q
    2. Internal energy, U
    3. Temperature, T
    4. Volume, V
    Show answer

    Answer: A. Heat depends on the route taken between two states, so it is a path function. U, T and V depend only on the state of the system.

  4. 4. Assertion (A): In an adiabatic process, the change in internal energy equals the work done on the system. Reason (R): In an adiabatic process no heat passes between the system and the surroundings.

    1. Both A and R are true, and R is the correct explanation of A
    2. Both A and R are true, but R is not the correct explanation of A
    3. A is true, but R is false
    4. A is false, but R is true
    Show answer

    Answer: A. Adiabatic means q = 0 (R is true). Putting q = 0 into ΔU = q + w gives ΔU = w, which is exactly A. So both are true and R explains A.

  5. 5. 300 J of work is done on a gas while it gives out 120 J of heat. What is ΔU?

    1. +420 J
    2. −180 J
    3. −420 J
    4. +180 J
    Show answer

    Answer: D. w = +300 J (work on the system); q = −120 J (heat given out). ΔU = −120 + 300 = +180 J.

Sign in to keep track of the lessons you finish.

Next lesson → Pressure-volume work and enthalpy

Privacy · Terms · Refunds · Delivery