- Foundation
- About 22 min
- 5 practice questions
Hess's law and enthalpies of different reactions
Apply Hess's law of constant heat summation, and work with enthalpies of combustion, atomization, bond enthalpies, lattice enthalpy through a Born-Haber cycle, and enthalpies of solution and dilution.
If something looks wrong, please tell us.
By the end of this lesson you can
- State Hess's law and combine thermochemical equations to find an unknown ΔrH°.
- Define enthalpy of combustion and enthalpy of atomization.
- Tell bond dissociation enthalpy from mean bond enthalpy, and estimate ΔrH° of gas reactions from bond enthalpies.
- Calculate lattice enthalpy with a Born-Haber cycle and relate it to enthalpy of solution; explain enthalpy of dilution.
Some reaction enthalpies cannot be measured directly. Burning carbon in limited oxygen, for example, always gives some CO₂ along with CO. Because enthalpy is a state function, we can reach the answer by another route whose steps are known.
Hess's law of constant heat summation
Hess's law: if a reaction takes place in several steps, its standard reaction enthalpy is the sum of the standard enthalpies of the steps, at the same temperature. ΔrH = ΔrH₁ + ΔrH₂ + ΔrH₃ + …
To use it: write the target equation; rearrange the given equations (reverse one and change the sign of its ΔH, or multiply it and multiply its ΔH) until, when added, they cancel to the target; then add the ΔH values.
Hess's law as a closed loop
- Reactants A Starting state
- Direct route: ΔrH One step from A to the products
- Products D Final state
- Indirect route back A → B → C → D has ΔH₁ + ΔH₂ + ΔH₃ = ΔrH, so going round the loop the total change is zero
Then back to step 1: Reactants A
Worked example 1: graphite to diamond
Standard enthalpies of combustion: C(graphite) = −393.5 kJ mol⁻¹, C(diamond) = −395.4 kJ mol⁻¹. Find ΔH for C(graphite) → C(diamond). Write C(graphite) + O₂ → CO₂, ΔH = −393.5; reverse the diamond equation: CO₂ → C(diamond) + O₂, ΔH = +395.4. Adding: C(graphite) → C(diamond), ΔH = −393.5 + 395.4 = +1.9 kJ mol⁻¹. A direct measurement would be impossible, but Hess's law gives it at once.
Enthalpy of combustion
The standard enthalpy of combustion, ΔcH°, is the enthalpy change when one mole of a substance burns completely in oxygen, all substances in their standard states. Combustion is always exothermic. Our bodies release energy from food through the same overall change, in many enzyme-controlled steps.
Worked example 2: ΔfH° of ethanol from combustion data
Given ΔcH°(C₂H₅OH, l) = −1367 kJ mol⁻¹, ΔfH°(CO₂, g) = −393.5 and ΔfH°(H₂O, l) = −285.8 kJ mol⁻¹. For C₂H₅OH(l) + 3O₂(g) → 2CO₂(g) + 3H₂O(l): ΔcH° = [2ΔfH°(CO₂) + 3ΔfH°(H₂O)] − ΔfH°(C₂H₅OH). So ΔfH°(C₂H₅OH) = 2(−393.5) + 3(−285.8) − (−1367) = −787.0 − 857.4 + 1367 = −277.4 kJ mol⁻¹, close to the tabulated −277.7 (the small gap is rounding).
Enthalpy of atomization and bond enthalpies
The enthalpy of atomization, ΔaH, is the enthalpy change for breaking one mole of a substance completely into gaseous atoms (for example CH₄(g) → C(g) + 4H(g), or Na(s) → Na(g), where it equals the enthalpy of sublimation). Breaking bonds always needs energy; forming them releases energy.
The bond dissociation enthalpy is the enthalpy change when one mole of a particular covalent bond in a gaseous molecule is broken to give gaseous products. For a diatomic molecule such as H₂ or Cl₂ it equals the enthalpy of atomization. In a polyatomic molecule, breaking identical bonds one after another needs different energies, because the fragment left changes each time, so we use the mean bond enthalpy: ΔaH divided by the number of such bonds. Example: in H₂O(g), removing the first H needs about 499 kJ mol⁻¹ and the second about 428 kJ mol⁻¹; ΔaH ≈ 927 kJ mol⁻¹, so the mean O–H bond enthalpy ≈ 927 ÷ 2 ≈ 464 kJ mol⁻¹.
For reactions in which all species are gases, an approximate ΔrH° follows from mean bond enthalpies:
ΔrH° ≈ Σ bond enthalpies of reactants − Σ bond enthalpies of products (gas-phase reactions only; an estimate)
| Bond | Value | Bond | Value |
|---|---|---|---|
| H–H | 435.8 | C–H | 414 |
| Cl–Cl | 243 | H–Cl | 431 |
| C–Cl | 330 | O–H | 464 |
| N≡N | 946 | N–H | 389 |
Worked example 3: H₂ + Cl₂ from bond enthalpies
For H₂(g) + Cl₂(g) → 2HCl(g): bonds broken = 435.8 + 243 = 678.8 kJ; bonds formed = 2 × 431 = 862 kJ. ΔrH° ≈ 678.8 − 862 = −183.2 kJ for the equation, or −91.6 kJ per mole of HCl (the measured value is about −92.3, so the estimate is good).
Lattice enthalpy and the Born-Haber cycle
The lattice enthalpy of an ionic compound is the enthalpy change when one mole of the solid separates into its gaseous ions, for example KCl(s) → K⁺(g) + Cl⁻(g). It is positive and cannot be measured directly, so it is found from a Born-Haber cycle: an enthalpy loop built from measurable steps, whose total round the loop is zero (Hess's law).
Born-Haber route for KCl (all values in kJ mol⁻¹)
- K(s) + ½Cl₂(g) Elements in reference states
- K(g) Sublimation of potassium: +89.0
- K⁺(g) + e⁻ Ionization enthalpy of K: +419
- Cl(g) Half the Cl–Cl bond enthalpy: +121
- Cl⁻(g) Electron gain enthalpy of Cl: −348.6
- KCl(s) Ions come together: −(lattice enthalpy)
Worked example 4: lattice enthalpy of KCl
Going from KCl(s) back to the elements and then round the cycle to the gaseous ions: ΔlatticeH = −ΔfH° + ΔsubH + ΔiH + ½ΔbondH + ΔegH = 436.7 + 89.0 + 419 + 121 − 348.6 = +717.1 kJ mol⁻¹.
Enthalpy of solution and of dilution
The enthalpy of solution, ΔsolH, is the enthalpy change when one mole of a substance dissolves in a specified amount of solvent. For an ionic solid it is the balance of breaking the lattice (endothermic) and hydrating the ions (exothermic): ΔsolH = ΔlatticeH + ΔhydH. For most salts ΔsolH is positive, so their solubility rises with temperature; a very large lattice enthalpy can stop a salt dissolving at all. ΔsolH also depends on how much solvent is used and approaches a limiting value at infinite dilution. The difference between two enthalpies of solution of the same solute with different amounts of solvent is the enthalpy of dilution, the heat change when extra solvent is added to an existing solution.
Key takeaways
- Hess's law: ΔH of the overall reaction = sum of ΔH of any set of steps that adds up to it.
- Reverse an equation: change the sign of ΔH; multiply it: multiply ΔH.
- Mean bond enthalpy = ΔaH ÷ number of identical bonds; for gas reactions ΔrH° ≈ Σ BE(reactants) − Σ BE(products).
- Lattice enthalpy (positive) comes from a Born-Haber cycle.
- ΔsolH = ΔlatticeH + ΔhydH; enthalpy of dilution depends on the starting concentration and the solvent added.
Check your understanding
-
1. Given S(rhombic) + O₂(g) → SO₂(g), ΔH = −297 kJ mol⁻¹, and SO₂(g) + ½O₂(g) → SO₃(g), ΔH = −99 kJ mol⁻¹, find ΔH for S(rhombic) + 3/2 O₂(g) → SO₃(g).
- −198 kJ mol⁻¹
- +396 kJ mol⁻¹
- −396 kJ mol⁻¹
- −495 kJ mol⁻¹
Show answer
Answer: C. Adding the two equations cancels SO₂ and gives the target. By Hess's law ΔH = −297 + (−99) = −396 kJ mol⁻¹.
-
2. Using mean bond enthalpies N≡N = 946, H–H = 435.8 and N–H = 389 kJ mol⁻¹, estimate ΔrH° for N₂(g) + 3H₂(g) → 2NH₃(g).
- −80.6 kJ
- +80.6 kJ
- −1388 kJ
- +2253 kJ
Show answer
Answer: A. Broken: 946 + 3 × 435.8 = 2253.4 kJ. Formed: 2 × 3 = 6 N–H bonds = 6 × 389 = 2334 kJ. ΔrH° ≈ 2253.4 − 2334 = −80.6 kJ (an estimate; the measured value is about −92 kJ).
-
3. Which equation represents the lattice enthalpy of sodium chloride?
- Na(s) + ½Cl₂(g) → NaCl(s)
- Na⁺(g) + Cl⁻(g) → NaCl(s)
- NaCl(s) → Na(g) + Cl(g)
- NaCl(s) → Na⁺(g) + Cl⁻(g)
Show answer
Answer: D. Lattice enthalpy is defined for one mole of the ionic solid separating into its gaseous ions, so it is positive. The first equation is formation, the second is the reverse of the lattice process, and the third gives atoms, not ions.
-
4. Assertion (A): For every diatomic molecule, the bond dissociation enthalpy differs from its enthalpy of atomization. Reason (R): Enthalpy of atomization is the enthalpy change for breaking one mole of a substance completely into gaseous atoms.
- Both A and R are true, and R is the correct explanation of A
- Both A and R are true, but R is not the correct explanation of A
- A is true, but R is false
- A is false, but R is true
Show answer
Answer: D. R is the correct definition. A is false: a diatomic molecule has only one bond, so breaking it already gives separate atoms, and the two quantities are equal (for H₂ both are 435.8 kJ mol⁻¹).
-
5. For a salt (made-up data), ΔlatticeH = +705 kJ mol⁻¹ and ΔhydH = −688 kJ mol⁻¹. What is ΔsolH?
- −17 kJ mol⁻¹
- +17 kJ mol⁻¹
- +1393 kJ mol⁻¹
- −1393 kJ mol⁻¹
Show answer
Answer: B. ΔsolH = ΔlatticeH + ΔhydH = 705 + (−688) = +17 kJ mol⁻¹. Dissolving is slightly endothermic, so this salt would dissolve better on warming.
Sign in to keep track of the lessons you finish.