• Foundation
  • About 22 min
  • 5 practice questions

Spontaneity, entropy and Gibbs energy

Explain why ΔH alone cannot predict spontaneity, use entropy and ΔS = qrev/T, apply ΔG = ΔH − TΔS, state the second and third laws, and connect ΔG° with the equilibrium constant through ΔG° = −RT ln K.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Explain what a spontaneous process is and why a fall in enthalpy is not enough to predict it.
  • Describe entropy, predict the sign of ΔS, and use ΔS = qrev/T and ΔStotal = ΔSsys + ΔSsurr.
  • Use ΔG = ΔH − TΔS to judge spontaneity and find the temperature at which it changes.
  • State the second and third laws and calculate K from ΔG° = −2.303 RT log K.

The first law balances energy but says nothing about direction. Heat flows from hot to cold, a gas spreads to fill its container, and carbon burns to CO₂; none of these reverses on its own. This lesson finds the quantity that decides direction.

What spontaneous means

A spontaneous process is one that has the potential to proceed without help from an outside agency. It says nothing about speed: hydrogen and oxygen can sit mixed for years with no visible change, yet the reaction is spontaneous. A spontaneous process is irreversible; it can be reversed only by an outside agency.

Is a fall in enthalpy the cause? Many spontaneous reactions are exothermic, like water falling downhill. But some endothermic changes are also spontaneous (ice melting on a warm day, salts such as ammonium nitrate dissolving with cooling), and gases mixing in an isolated box happens with ΔH = 0. So a decrease in enthalpy can help, but cannot be the whole rule.

Entropy

When two gases mix, the system becomes more random: a molecule picked at random could be either gas. Entropy, S, is a measure of this randomness, or more precisely of how widely energy is spread among the particles. It is a state function. For a given substance S(solid) < S(liquid) < S(gas); S rises with temperature; a reaction that produces more gas molecules usually has ΔS > 0.

Heat randomises a system, and the same heat causes more disorder at a low temperature than at a high one, where motion is already vigorous. So for a reversible change: ΔS = qrev / T (unit J K⁻¹ mol⁻¹). For a spontaneous process the total entropy of system plus surroundings increases; at equilibrium it is at its maximum and ΔStotal = 0. For an isolated system ΔU = 0, yet ΔS > 0 for any spontaneous change, so entropy distinguishes spontaneous from non-spontaneous changes where energy cannot.

ΔS = qrev / T; ΔStotal = ΔSsys + ΔSsurr > 0 for a spontaneous process, = 0 at equilibrium

Worked example 1: entropy of melting

Ice melts reversibly at 273 K with ΔfusH = 6.00 kJ mol⁻¹. ΔS = qrev/T = 6000 J mol⁻¹ ÷ 273 K ≈ +22.0 J K⁻¹ mol⁻¹. Positive, as expected: the liquid is less ordered than the crystal.

Worked example 2: why an entropy-lowering reaction still happens

For 2H₂(g) + O₂(g) → 2H₂O(l) at 298 K, ΔH° = −571.6 kJ and ΔS°(sys) = −326.7 J K⁻¹. The heat given out enters the surroundings: ΔSsurr = −ΔH/T = 571 600 J ÷ 298 K ≈ +1918 J K⁻¹. ΔStotal = 1918 + (−326.7) ≈ +1591 J K⁻¹ > 0, so the reaction is spontaneous even though the system becomes more ordered.

Gibbs energy

Tracking the surroundings is awkward, so we define the Gibbs energy, G = H − TS, a state function and an extensive property. At constant temperature ΔG = ΔH − TΔS. With ΔSsurr = −ΔHsys/T, the condition ΔStotal > 0 becomes TΔSsys − ΔHsys > 0, that is, ΔG < 0. At constant temperature and pressure: ΔG < 0, spontaneous; ΔG > 0, non-spontaneous; ΔG = 0, equilibrium. ΔG is also the energy available to do useful (non-pV) work, which is why it is called the free energy; TΔS is the part not available for work.

Gibbs equation: ΔG = ΔH − TΔS (constant T and p). ΔG < 0 means spontaneous.

How the signs of ΔH and ΔS decide spontaneity
ΔHΔSΔGSpontaneous?
−+always −At all temperatures
−−− at low T, + at high TOnly at low temperature
+++ at low T, − at high TOnly at high temperature
+−always +At no temperature

'Low' and 'high' are relative; for some reactions 'high' may simply mean room temperature. When ΔH and ΔS have the same sign, the switch-over temperature is where ΔG = 0, i.e. T = ΔH/ΔS.

Worked example 3: decomposing limestone

For CaCO₃(s) → CaO(s) + CO₂(g), take ΔH° = +178.3 kJ mol⁻¹ and ΔS° = +158.9 J K⁻¹ mol⁻¹ = +0.1589 kJ K⁻¹ mol⁻¹. At 298 K: ΔG° = 178.3 − 298 × 0.1589 = 178.3 − 47.4 = +130.9 kJ mol⁻¹, not spontaneous. It becomes spontaneous above T = ΔH/ΔS = 178 300 ÷ 158.9 ≈ 1122 K, which is why lime kilns run very hot.

Second and third laws

Second law: in an isolated system, whose energy stays constant, the entropy increases in every spontaneous change. It explains why spontaneous exothermic reactions are so common: the heat they release raises the entropy of the surroundings. Third law: the entropy of a pure, perfectly crystalline substance approaches zero as the temperature approaches 0 K, because the crystal is then perfectly ordered. (Solutions and supercooled liquids keep some entropy at 0 K.) The third law allows absolute entropies to be found from heat measurements, and these give ΔS° of reactions by a Hess-type sum.

Gibbs energy and equilibrium

What the value of ΔrG° tells us

  • ΔrG° negative
    • K > 1
    • Products favoured at equilibrium
  • ΔrG° zero
    • K = 1
  • ΔrG° positive
    • K < 1
    • Reactants favoured at equilibrium

At equilibrium G is at a minimum and ΔrG = 0. For all species in their standard states this leads to the link between ΔrG° and the equilibrium constant:

ΔrG° = −RT ln K = −2.303 RT log K, and ΔrG° = ΔrH° − TΔrS°

Worked example 4: from ΔG° to K

A reaction has ΔrG° = −5.70 kJ mol⁻¹ at 298 K. Take R = 8.314 J mol⁻¹ K⁻¹. log K = −ΔrG° / (2.303RT) = 5700 ÷ (2.303 × 8.314 × 298) = 5700 ÷ 5706 ≈ 0.999, so K ≈ 10. Going the other way, a reaction with K = 1.0 × 10⁻⁵ at 300 K has ΔrG° = −2.303 × 8.314 × 300 × (−5) ≈ +28.7 kJ mol⁻¹.

Key takeaways

  • Spontaneous means able to happen without outside help, not fast.
  • Entropy measures randomness; ΔS = qrev/T; for a spontaneous change ΔStotal > 0.
  • ΔG = ΔH − TΔS; ΔG < 0 spontaneous, ΔG = 0 equilibrium; switch-over at T = ΔH/ΔS.
  • Second law: entropy of an isolated system rises in spontaneous change. Third law: S → 0 for a perfect crystal at 0 K.
  • ΔrG° = −2.303 RT log K: negative ΔrG° means K > 1.

Check your understanding

  1. 1. A liquid boils at 350 K with ΔvapH = 35.0 kJ mol⁻¹. What is its entropy of vaporisation?

    1. +10 J K⁻¹ mol⁻¹
    2. +0.10 J K⁻¹ mol⁻¹
    3. −100 J K⁻¹ mol⁻¹
    4. +100 J K⁻¹ mol⁻¹
    Show answer

    Answer: D. Boiling at the boiling point is reversible, so ΔS = qrev/T = 35 000 J mol⁻¹ ÷ 350 K = +100 J K⁻¹ mol⁻¹. It is positive because the gas is far more disordered than the liquid.

  2. 2. A reaction has ΔH > 0 and ΔS > 0. When is it spontaneous?

    1. At all temperatures
    2. Only at high temperatures
    3. Only at low temperatures
    4. At no temperature
    Show answer

    Answer: B. ΔG = ΔH − TΔS. With both positive, ΔG is positive when T is small and becomes negative once TΔS exceeds ΔH, that is, above T = ΔH/ΔS.

  3. 3. The equilibrium constant of a reaction at 300 K is 100. What is ΔrG°? (R = 8.314 J mol⁻¹ K⁻¹)

    1. −11.5 kJ mol⁻¹
    2. +11.5 kJ mol⁻¹
    3. −5.74 kJ mol⁻¹
    4. −26.5 kJ mol⁻¹
    Show answer

    Answer: A. ΔrG° = −2.303 RT log K = −2.303 × 8.314 × 300 × log 100 = −2.303 × 8.314 × 300 × 2 ≈ −11 488 J mol⁻¹ ≈ −11.5 kJ mol⁻¹.

  4. 4. Assertion (A): Many endothermic reactions with a positive entropy change become spontaneous at high temperature. Reason (R): In ΔG = ΔH − TΔS, the term −TΔS becomes more negative as T rises when ΔS is positive.

    1. Both A and R are true, and R is the correct explanation of A
    2. Both A and R are true, but R is not the correct explanation of A
    3. A is true, but R is false
    4. A is false, but R is true
    Show answer

    Answer: A. Both are true. Because −TΔS grows more negative with temperature, at a high enough T it outweighs the positive ΔH and makes ΔG negative. R therefore explains A.

  5. 5. For a reaction, ΔH = +40 kJ mol⁻¹ and ΔS = +125 J K⁻¹ mol⁻¹ (assumed constant). Above what temperature is it spontaneous?

    1. 0.32 K
    2. 273 K
    3. 320 K
    4. 3125 K
    Show answer

    Answer: C. At the switch-over ΔG = 0, so T = ΔH/ΔS = 40 000 J mol⁻¹ ÷ 125 J K⁻¹ mol⁻¹ = 320 K. Above 320 K, TΔS > ΔH and ΔG < 0.

Sign in to keep track of the lessons you finish.

Next lesson → Final self-assessment: Thermodynamics

Privacy · Terms · Refunds · Delivery