Revision notes

Chapter 5 Thermodynamics: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

System, surroundings and the first law of thermodynamics

Types of thermodynamic system

  • Open system
    • Exchanges both matter and energy
    • Example: water boiling in an uncovered pan
  • Closed system
    • Exchanges energy but not matter
    • Example: reactants sealed in a steel or copper vessel
  • Isolated system
    • Exchanges neither matter nor energy
    • Example (ideal): contents of a well-sealed vacuum flask
What can cross the boundary decides the type.
IUPAC sign convention (used throughout this course)
ProcessSignEffect on U
Heat absorbed by the systemq > 0U increases
Heat released by the systemq < 0U decreases
Work done ON the system (e.g. compression)w > 0U increases
Work done BY the system (e.g. expansion)w < 0U decreases

First law: ΔU = q + w. The energy of an isolated system is constant; energy can be neither created nor destroyed, only transferred or changed in form.

— Sign convention: IUPAC (energy into the system is positive)

State functions and path functions

  • State functions
    • Depend only on the present state
    • Change fixed by start and end states
    • Examples: U, H, p, V, T
    • ΔU is the same on every path
  • Path functions
    • Depend on how the change is made
    • Not properties of a single state
    • Examples: q and w
    • Only their sum q + w is path-independent
  • System + surroundings = universe; the boundary may be real or imaginary.
  • Open: matter and energy cross; closed: energy only; isolated: neither.
  • U, p, V, T are state functions; q and w are path functions.
  • IUPAC convention: heat absorbed and work done on the system are positive.
  • First law: ΔU = q + w; for an adiabatic change ΔU = w(ad); for an isolated system ΔU = 0.
Read the full lesson

Lesson 2

Pressure-volume work and enthalpy

w = −pex ΔV = −pex (Vf − Vi) (IUPAC: w is work done on the system)

w(rev, isothermal) = −nRT ln(Vf/Vi) = −2.303 nRT log(Vf/Vi)

First law for special processes (ideal gas)
ProcessConditionResult
Constant volumeΔV = 0, so w = 0ΔU = qV
Adiabaticq = 0ΔU = w(ad)
Isothermal, irreversibleΔU = 0q = −w = pex(Vf − Vi)
Isothermal, reversibleΔU = 0q = −w = 2.303 nRT log(Vf/Vi)
Free expansionpex = 0w = 0, q = 0, ΔU = 0

H = U + pV; at constant pressure ΔH = ΔU + pΔV = qp. ΔH < 0: exothermic; ΔH > 0: endothermic.

Extensive versus intensive

  • Extensive
    • Doubles when the sample is doubled
    • Mass, volume, U, H, heat capacity C
    • Can be added for parts of a system
  • Intensive
    • Same for any amount of sample
    • Temperature, pressure, density
    • Molar quantities such as Vm and Cm
  • w = −pexΔV; compression gives w > 0, expansion gives w < 0.
  • Reversible isothermal work: w = −2.303 nRT log(Vf/Vi); free expansion does no work.
  • For an ideal gas at constant T, ΔU = 0 and q = −w.
  • H = U + pV is a state function; ΔH = qp at constant pressure.
  • ΔH = ΔU + ΔngRT, counting gaseous species only.
Read the full lesson

Lesson 3

Heat capacity, calorimetry and standard enthalpies

q = C ΔT = n Cm ΔT = c m ΔT

Two kinds of calorimeter

  • Bomb calorimeter
    • Sealed steel bomb in a water bath
    • Substance burnt in pure oxygen
    • Volume constant, so no pV work
    • Measures qV = ΔU
  • Constant-pressure calorimeter
    • Open to the atmosphere
    • Used for reactions in solution
    • Pressure constant
    • Measures qp = ΔH (heat of reaction)

ΔrH° = Σ ai ΔfH°(products) − Σ bi ΔfH°(reactants), where a and b are the stoichiometric coefficients

  • q = CΔT = nCmΔT = cmΔT; for an ideal gas Cp − Cv = R.
  • A bomb calorimeter (constant volume) gives ΔU; a constant-pressure calorimeter gives ΔH.
  • Standard state: pure substance at 1 bar; ΔfusH, ΔvapH and ΔsubH are positive.
  • ΔfH° of an element in its reference state is zero.
  • ΔrH° = Σ ΔfH°(products) − Σ ΔfH°(reactants), each multiplied by its coefficient.
Read the full lesson

Lesson 4

Hess's law and enthalpies of different reactions

Hess's law: if a reaction takes place in several steps, its standard reaction enthalpy is the sum of the standard enthalpies of the steps, at the same temperature. ΔrH = ΔrH₁ + ΔrH₂ + ΔrH₃ + …

Hess's law as a closed loop

  1. Reactants A Starting state
  2. Direct route: ΔrH One step from A to the products
  3. Products D Final state
  4. Indirect route back A → B → C → D has ΔH₁ + ΔH₂ + ΔH₃ = ΔrH, so going round the loop the total change is zero

Then back to step 1: Reactants A

ΔrH° ≈ Σ bond enthalpies of reactants − Σ bond enthalpies of products (gas-phase reactions only; an estimate)

Mean bond enthalpies used here (kJ mol⁻¹, 298 K)
BondValueBondValue
H–H435.8C–H414
Cl–Cl243H–Cl431
C–Cl330O–H464
N≡N946N–H389

Born-Haber route for KCl (all values in kJ mol⁻¹)

  1. K(s) + ½Cl₂(g) Elements in reference states
  2. K(g) Sublimation of potassium: +89.0
  3. K⁺(g) + e⁻ Ionization enthalpy of K: +419
  4. Cl(g) Half the Cl–Cl bond enthalpy: +121
  5. Cl⁻(g) Electron gain enthalpy of Cl: −348.6
  6. KCl(s) Ions come together: −(lattice enthalpy)
The direct route K(s) + ½Cl₂(g) → KCl(s) has ΔfH° = −436.7 kJ mol⁻¹.
  • Hess's law: ΔH of the overall reaction = sum of ΔH of any set of steps that adds up to it.
  • Reverse an equation: change the sign of ΔH; multiply it: multiply ΔH.
  • Mean bond enthalpy = ΔaH ÷ number of identical bonds; for gas reactions ΔrH° ≈ Σ BE(reactants) − Σ BE(products).
  • Lattice enthalpy (positive) comes from a Born-Haber cycle.
  • ΔsolH = ΔlatticeH + ΔhydH; enthalpy of dilution depends on the starting concentration and the solvent added.
Read the full lesson

Lesson 5

Spontaneity, entropy and Gibbs energy

ΔS = qrev / T; ΔStotal = ΔSsys + ΔSsurr > 0 for a spontaneous process, = 0 at equilibrium

Gibbs equation: ΔG = ΔH − TΔS (constant T and p). ΔG < 0 means spontaneous.

How the signs of ΔH and ΔS decide spontaneity
ΔHΔSΔGSpontaneous?
−+always −At all temperatures
−−− at low T, + at high TOnly at low temperature
+++ at low T, − at high TOnly at high temperature
+−always +At no temperature

What the value of ΔrG° tells us

  • ΔrG° negative
    • K > 1
    • Products favoured at equilibrium
  • ΔrG° zero
    • K = 1
  • ΔrG° positive
    • K < 1
    • Reactants favoured at equilibrium

ΔrG° = −RT ln K = −2.303 RT log K, and ΔrG° = ΔrH° − TΔrS°

  • Spontaneous means able to happen without outside help, not fast.
  • Entropy measures randomness; ΔS = qrev/T; for a spontaneous change ΔStotal > 0.
  • ΔG = ΔH − TΔS; ΔG < 0 spontaneous, ΔG = 0 equilibrium; switch-over at T = ΔH/ΔS.
  • Second law: entropy of an isolated system rises in spontaneous change. Third law: S → 0 for a perfect crystal at 0 K.
  • ΔrG° = −2.303 RT log K: negative ΔrG° means K > 1.
Read the full lesson

Privacy · Terms · Refunds · Delivery