• Foundation
  • About 30 min
  • 15 practice questions

Final self-assessment: System of Particles and Rotational Motion

Test yourself on the whole course: 15 questions with answers explained.

If something looks wrong, please tell us.

Attempt all 15 questions in one sitting of about 30 minutes, with a rough sheet for the numericals and without looking back at the lessons. The questions mix ideas from all five lessons, include assertion-reason items, and are a little harder than the lesson checks. Check your answers only after you finish, and read every explanation, including those for questions you got right.

Final self-assessment

  1. 1. Particles of 2 kg, 3 kg and 5 kg are at x = 0, x = 2 m and x = 4 m. The centre of mass is at:

    1. x = 2.6 m
    2. x = 2.0 m
    3. x = 3.0 m
    4. x = 1.8 m
    Show answer

    Answer: A. X = (2 × 0 + 3 × 2 + 5 × 4)/(2 + 3 + 5) = (0 + 6 + 20)/10 = 2.6 m.

  2. 2. A circular hole of radius R/2 is cut from a uniform disc of radius R, the hole touching the rim. The centre of mass of the remaining part is shifted from the original centre by:

    1. R/2
    2. R/4
    3. R/6
    4. R/3
    Show answer

    Answer: C. Mass ∝ area: full disc 4 units at 0, hole 1 unit at R/2, remainder 3 units at X. 4 × 0 = 3X + 1 × R/2, so X = −R/6: a shift of R/6 away from the hole.

  3. 3. Assertion (A): The centre of mass of a system of particles can move only if an external force acts on the system. Reason (R): Internal forces between the particles cancel in pairs by Newton's third law.

    1. Both A and R are true, and R is the correct explanation of A.
    2. Both A and R are true, but R is not the correct explanation of A.
    3. A is true, but R is false.
    4. A is false, but R is true.
    Show answer

    Answer: D. R is true and gives MA = F_ext. But A as stated is false: with zero external force the centre of mass need not be at rest; it can move with constant velocity. What an external force is needed for is to accelerate the centre of mass.

  4. 4. A 6 kg body at rest explodes into three equal pieces. Two of them fly off at right angles to each other, each at 4 m s⁻¹. The speed of the third piece is:

    1. 4 m s⁻¹
    2. 4√2 m s⁻¹
    3. 8 m s⁻¹
    4. 2√2 m s⁻¹
    Show answer

    Answer: B. Each piece is 2 kg. The two known momenta are 8 kg m s⁻¹ each, at right angles, with resultant 8√2 kg m s⁻¹. The third piece must cancel this: 2v = 8√2, so v = 4√2 ≈ 5.66 m s⁻¹.

  5. 5. If a = î + ĵ and b = î − ĵ, then a × b is:

    1. 2k̂
    2. zero
    3. −2k̂
    4. 2î
    Show answer

    Answer: C. a × b = (aₓb_y − a_ybₓ)k̂ = (1 × (−1) − 1 × 1)k̂ = −2k̂. (The î and ĵ components are zero because a_z = b_z = 0.)

  6. 6. The torque of a force F = 2ĵ N acting at r = 3î m about the origin is:

    1. 6k̂ N m
    2. −6k̂ N m
    3. 6î N m
    4. zero
    Show answer

    Answer: A. τ = r × F = 3î × 2ĵ = 6(î × ĵ) = 6k̂ N m.

  7. 7. A particle of mass 0.5 kg moves at 4 m s⁻¹ in a circle of radius 2 m. Its angular momentum about the centre is:

    1. 1 kg m² s⁻¹
    2. 8 kg m² s⁻¹
    3. 16 kg m² s⁻¹
    4. 4 kg m² s⁻¹
    Show answer

    Answer: D. In circular motion r is perpendicular to p, so l = rp = 2 × (0.5 × 4) = 4 kg m² s⁻¹.

  8. 8. Assertion (A): It is easier to open a door by pushing at its outer edge than near its hinges. Reason (R): For the same force, torque increases with the perpendicular distance of the line of action from the axis.

    1. Both A and R are true, and R is the correct explanation of A.
    2. Both A and R are true, but R is not the correct explanation of A.
    3. A is true, but R is false.
    4. A is false, but R is true.
    Show answer

    Answer: A. Both are true. τ = r⊥F, so a push at the outer edge (large r⊥) gives more torque for the same force. R explains A.

  9. 9. A uniform plank 4.0 m long and of weight 200 N rests on two supports at its ends. A 600 N man stands 1.0 m from one end. The force on the support nearer to him is:

    1. 450 N
    2. 550 N
    3. 250 N
    4. 400 N
    Show answer

    Answer: B. Take moments about the far support (3.0 m from the man, 2.0 m from the plank's centre): R_near × 4.0 = 600 × 3.0 + 200 × 2.0 = 1800 + 400 = 2200, so R_near = 550 N. (The other support carries 800 − 550 = 250 N.)

  10. 10. Which statement about a body in equilibrium under coplanar forces is correct?

    1. Only the net force must be zero
    2. Only the net torque about the centre of mass must be zero
    3. The net force must be zero and the net torque about any one point must be zero
    4. The forces must all pass through one point
    Show answer

    Answer: C. A rigid body needs both translational (ΣF = 0) and rotational (Στ = 0) equilibrium. When ΣF = 0, the torque condition holds about every point if it holds about one, so any convenient point may be chosen. The forces need not be concurrent.

  11. 11. The moment of inertia of a uniform rod of mass 0.6 kg and length 1.0 m about a perpendicular axis through its centre is:

    1. 0.6 kg m²
    2. 0.15 kg m²
    3. 0.2 kg m²
    4. 0.05 kg m²
    Show answer

    Answer: D. I = ML²/12 = 0.6 × 1.0²/12 = 0.05 kg m².

  12. 12. A solid sphere and a hollow sphere have the same mass and radius. About a diameter:

    1. the hollow sphere has the larger moment of inertia
    2. the solid sphere has the larger moment of inertia
    3. they have equal moments of inertia
    4. the comparison depends on how fast they spin
    Show answer

    Answer: A. In the hollow sphere all the mass is at distance R from the centre, while the solid sphere has much of its mass closer to the axis. So the hollow sphere has the larger I (2MR²/3 compared with 2MR²/5). I does not depend on the speed of rotation.

  13. 13. A motor rotates a shaft at 50 rad s⁻¹ while supplying a torque of 30 N m. The power delivered is:

    1. 1.5 kW
    2. 0.6 kW
    3. 80 W
    4. 15 kW
    Show answer

    Answer: A. P = τω = 30 × 50 = 1500 W = 1.5 kW.

  14. 14. A wheel slows uniformly from 40 rad s⁻¹ to 20 rad s⁻¹ in 5.0 s. The angle it turns through in this time is:

    1. 100 rad
    2. 300 rad
    3. 150 rad
    4. 200 rad
    Show answer

    Answer: C. For constant α, θ = ½(ω₀ + ω)t = ½(40 + 20) × 5.0 = 30 × 5.0 = 150 rad. (α = −4.0 rad s⁻².)

  15. 15. A disc of moment of inertia 0.20 kg m² spins freely at 30 rad s⁻¹. A ring of moment of inertia 0.10 kg m², initially at rest, is dropped gently onto it coaxially and they rotate together. The final angular speed is:

    1. 15 rad s⁻¹
    2. 10 rad s⁻¹
    3. 45 rad s⁻¹
    4. 20 rad s⁻¹
    Show answer

    Answer: D. No external torque about the axis, so angular momentum is conserved: 0.20 × 30 = (0.20 + 0.10)ω, giving 6.0 = 0.30ω and ω = 20 rad s⁻¹.

Questions 1-3: lesson 1 and lesson 2 (centre of mass and its motion). Questions 4-6: lesson 2 and lesson 3 (momentum of a system, vector product, torque). Questions 7-8: lesson 3 (angular momentum and torque). Questions 9-10: lesson 4 (equilibrium of a rigid body). Questions 11-15: lesson 5 (moment of inertia and rotational dynamics).

Sign in to keep track of the lessons you finish.

Privacy · Terms · Refunds · Delivery