- Foundation
- About 25 min
- 15 practice questions
Final self-assessment: Thermal Properties of Matter
Test yourself on the whole course: 15 questions with answers explained.
If something looks wrong, please tell us.
Attempt all 15 questions in one sitting of about 25 minutes, with a rough sheet for the numericals and without looking back at the lessons. Use R = 8.31 J mol⁻¹ K⁻¹ and σ = 5.67 × 10⁻⁸ W m⁻² K⁻⁴ where needed, and the values given in each question. Check your answers only after you finish, and read every explanation, including those for questions you got right.
Final self-assessment
-
1. A temperature of 300 K corresponds on the Fahrenheit scale to about
- 26.9 °F
- 80.3 °F
- 572 °F
- 112 °F
Show answer
Answer: B. First tC = 300 − 273.15 = 26.85 °C. Then tF = (9/5) × 26.85 + 32 = 48.33 + 32 = 80.33 °F ≈ 80.3 °F.
-
2. For a fixed volume of a low-density gas, the graph of pressure against temperature in °C is extrapolated to zero pressure. Where does it meet the temperature axis?
- 0 °C
- −100 °C
- −273.15 °C
- It depends on which gas is used
Show answer
Answer: C. All low-density gases give lines that meet at −273.15 °C, the absolute zero of temperature, whatever the gas. This defines 0 K.
-
3. What volume does 0.50 mol of an ideal gas occupy at 1.0 × 10⁵ Pa and 300 K?
- 1.25 L
- 12.5 L
- 125 L
- 0.125 L
Show answer
Answer: B. V = μRT/P = 0.50 × 8.31 × 300/(1.0 × 10⁵) = 1246.5/10⁵ ≈ 0.0125 m³ = 12.5 L (1 m³ = 1000 L).
-
4. A metal plate of area 0.50 m² (αl = 2.0 × 10⁻⁵ K⁻¹) is heated through 100 K. What is the increase in its area?
- 1.0 × 10⁻³ m²
- 4.0 × 10⁻³ m²
- 3.0 × 10⁻³ m²
- 2.0 × 10⁻³ m²
Show answer
Answer: D. The coefficient of area expansion is 2αl, so ΔA = 2αl A ΔT = 2 × 2.0 × 10⁻⁵ × 0.50 × 100 = 2.0 × 10⁻³ m².
-
5. A steel bar is held between rigid supports and heated through 25 K. With Y = 2.0 × 10¹¹ N m⁻² and αl = 1.2 × 10⁻⁵ K⁻¹, the thermal stress in it is
- 6.0 × 10⁷ N m⁻²
- 2.4 × 10⁶ N m⁻²
- 3.0 × 10⁻⁴ N m⁻²
- 4.8 × 10⁹ N m⁻²
Show answer
Answer: A. The bar is denied a strain αl ΔT = 1.2 × 10⁻⁵ × 25 = 3.0 × 10⁻⁴. Stress = Y × strain = 2.0 × 10¹¹ × 3.0 × 10⁻⁴ = 6.0 × 10⁷ N m⁻².
-
6. Assertion (A): In very cold weather, ponds freeze from the top downward. Reason (R): Water has its maximum density at about 4 °C.
- Both A and R are true, and R is the correct explanation of A
- Both A and R are true, but R is not the correct explanation of A
- A is true, but R is false
- A is false, but R is true
Show answer
Answer: A. Because water is densest at 4 °C, water at that temperature settles at the bottom, while water cooled below 4 °C is lighter and stays at the surface, where it freezes. R explains A.
-
7. About how much heat is needed to change 1.0 kg of ice at 0 °C into steam at 100 °C? (Lf = 3.33 × 10⁵ J kg⁻¹, s(water) = 4186 J kg⁻¹ K⁻¹, Lv = 22.6 × 10⁵ J kg⁻¹)
- 7.5 × 10⁵ J
- 2.6 × 10⁶ J
- 3.0 × 10⁶ J
- 4.2 × 10⁵ J
Show answer
Answer: C. Melt: 3.33 × 10⁵ J. Warm 0 to 100 °C: 1.0 × 4186 × 100 = 4.19 × 10⁵ J. Boil: 22.6 × 10⁵ J. Total = 3.33 + 4.19 + 22.6 = 30.1 × 10⁵ J ≈ 3.0 × 10⁶ J.
-
8. 0.050 kg of ice at 0 °C is added to 0.20 kg of water at 50 °C. Taking s(water) = 4200 J kg⁻¹ K⁻¹ and Lf = 3.36 × 10⁵ J kg⁻¹, and ignoring the container, the final temperature is
- 24 °C
- 40 °C
- 16 °C
- 30 °C
Show answer
Answer: A. Melting needs 0.050 × 3.36 × 10⁵ = 16 800 J. Balance: 0.20 × 4200 × (50 − T) = 16 800 + 0.050 × 4200 × T, so 42 000 − 840T = 16 800 + 210T, 25 200 = 1050T and T = 24 °C.
-
9. A 0.50 kg metal piece at 120 °C is put into 1.0 kg of water at 20 °C (s = 4200 J kg⁻¹ K⁻¹). The final temperature is 25 °C. Ignoring heat losses, the specific heat of the metal is about
- 210 J kg⁻¹ K⁻¹
- 442 J kg⁻¹ K⁻¹
- 884 J kg⁻¹ K⁻¹
- 4200 J kg⁻¹ K⁻¹
Show answer
Answer: B. Heat gained by water = 1.0 × 4200 × 5 = 21 000 J. Heat lost by metal = 0.50 × s × 95 = 47.5 s. So s = 21 000/47.5 ≈ 442 J kg⁻¹ K⁻¹.
-
10. Rod Y is made of the same material as rod X but has twice its length and twice its diameter. For the same temperature difference between the ends, the steady heat current in Y compared with X is
- half
- the same
- twice
- four times
Show answer
Answer: C. H = KAΔT/L, so H ∝ A/L. Doubling the diameter makes A four times larger; doubling L halves H. Net factor 4/2 = 2.
-
11. Two slabs of equal thickness and area, with conductivities 60 and 30 W m⁻¹ K⁻¹, are placed in series. What is the equivalent thermal conductivity of the combination?
- 45 W m⁻¹ K⁻¹
- 90 W m⁻¹ K⁻¹
- 20 W m⁻¹ K⁻¹
- 40 W m⁻¹ K⁻¹
Show answer
Answer: D. For two equal lengths in series, K′ = 2K₁K₂/(K₁ + K₂) = 2 × 60 × 30/90 = 3600/90 = 40 W m⁻¹ K⁻¹. The simple average, 45, is wrong because the poorer conductor controls the flow.
-
12. Which of these is an example of forced convection?
- Heat travelling along a metal spoon dipped in hot tea
- A sea breeze on a sunny afternoon
- Heat reaching the Earth from the Sun
- Blood pumped by the heart carrying heat from the body's core to the skin
Show answer
Answer: D. Forced convection needs the fluid to be moved by a pump or fan; here the heart is the pump. Heat along a spoon is conduction, the sea breeze is natural convection driven by buoyancy, and the Sun's heat arrives by radiation.
-
13. A body of emissivity 0.50 and surface area 0.20 m² is at 500 K in surroundings at 300 K. Its net rate of heat loss by radiation is about
- 31 W
- 3.1 × 10² W
- 7.1 × 10² W
- 3.1 × 10³ W
Show answer
Answer: B. H = eσA(T⁴ − Ts⁴) = 0.50 × 5.67 × 10⁻⁸ × 0.20 × (6.25 × 10¹⁰ − 0.81 × 10¹⁰) = 5.67 × 10⁻⁹ × 5.44 × 10¹⁰ ≈ 308 W, about 3.1 × 10² W.
-
14. The radiation from star P peaks at 400 nm and from star Q at 600 nm. What is the ratio of their surface temperatures T(P) : T(Q)?
- 2 : 3
- 9 : 4
- 4 : 9
- 3 : 2
Show answer
Answer: D. Wien's law: T = b/λm, so T ∝ 1/λm. T(P)/T(Q) = 600/400 = 3/2. The star whose radiation peaks at the shorter wavelength is hotter.
-
15. A liquid cools from 90 °C to 80 °C in 4.0 minutes in a room at 30 °C. Using Newton's law of cooling with average temperatures, how long will it take to cool from 70 °C to 60 °C?
- 4.0 min
- 2.5 min
- 6.3 min
- 8.0 min
Show answer
Answer: C. First interval: average 85 °C, excess 55 °C; second: average 65 °C, excess 35 °C. Equal 10 °C drops, so time ∝ 1/excess: t = 4.0 × 55/35 ≈ 6.3 min.
Questions 1-3: lesson 1 (temperature scales and the ideal-gas equation). Questions 4-6: lesson 2 (thermal expansion). Questions 7-9: lesson 3 (specific heat, calorimetry and latent heat). Questions 10-12: lesson 4 (conduction and convection). Questions 13-15: lesson 5 (radiation and Newton's law of cooling).
Sign in to keep track of the lessons you finish.