Revision notes

Chapter 11 Thermodynamics: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Thermal equilibrium, the zeroth law and internal energy

Zeroth law of thermodynamics: two systems in thermal equilibrium with a third system separately are in thermal equilibrium with each other.

How the zeroth law defines temperature

  1. A in equilibrium with C Through a conducting wall; nothing changes any more.
  2. B in equilibrium with C Again, no further change.
  3. Bring A and B into contact Nothing changes: A and B are already in equilibrium.
  4. Common property That shared property is temperature: T(A) = T(B) = T(C).

Internal energy versus heat and work

  • Internal energy U
    • Possessed by the system
    • State variable: depends only on the state
    • ΔU same for every path between two states
    • Sum of molecular kinetic and potential energies
  • Heat Q and work W
    • Energy in transit
    • Not state variables: depend on the path
    • Heat: driven by a temperature difference
    • Work: by other means, e.g. moving a piston
  • Thermodynamic equilibrium: macroscopic variables do not change in time.
  • Zeroth law: two systems each in equilibrium with a third are in equilibrium with each other; this defines temperature.
  • Internal energy U is a state variable and excludes the motion of the system as a whole.
  • Heat and work are two modes of energy transfer; neither is a state variable.
Read the full lesson

Lesson 2

First law of thermodynamics and specific heats of gases

First law: ΔQ = ΔU + ΔW. Sign convention: Q > 0 heat added to the system; Q < 0 heat removed; W > 0 work done by the system; W < 0 work done on the system.

For an ideal gas: Cp − Cv = R. Cp is larger because at constant pressure part of the heat goes into work as the gas expands.

  • ΔQ = ΔU + ΔW: heat in = rise in internal energy + work done by the system.
  • W = PΔV at constant pressure; in general W is the area under the P-V curve.
  • For many solids C ≈ 3R; 1 cal = 4.186 J.
  • Ideal gas: Cv = ΔU/ΔT, Cp − Cv = R.
Read the full lesson

Lesson 3

Thermodynamic processes: isothermal, adiabatic, isobaric, isochoric

Special thermodynamic processes
ProcessKept constantFirst law becomes
IsothermalTemperature TΔU = 0 (ideal gas), so Q = W
AdiabaticNo heat exchange (Q = 0)W = −ΔU
IsochoricVolume VW = 0, so Q = ΔU
IsobaricPressure PQ = ΔU + PΔV
CyclicReturns to the initial stateΔU = 0, so net Q = net W

Isothermal: PV = constant, W = μRT ln(V₂/V₁). Adiabatic: PV^γ = constant, W = μR(T₁ − T₂)/(γ − 1).

Ideal-gas processes and the first law

  • Isothermal
    • ΔU = 0
    • Q = W = μRT ln(V₂/V₁)
  • Adiabatic
    • Q = 0
    • W = −ΔU
    • PV^γ = constant
  • Isochoric
    • W = 0
    • Q = ΔU = μCvΔT
  • Isobaric
    • W = PΔV = μRΔT
    • Q = μCpΔT
  • Cyclic
    • ΔU = 0
    • Net Q = net W = area of loop
  • State variables describe equilibrium states; an equation of state links them.
  • Quasi-static: infinitely slow, always in equilibrium.
  • Isothermal: Q = W = μRT ln(V₂/V₁). Adiabatic: PV^γ = constant, W = μR(T₁ − T₂)/(γ − 1).
  • Isochoric: W = 0. Isobaric: W = PΔV. Cyclic: ΔU = 0.
Read the full lesson

Lesson 4

Second law, heat engines, refrigerators and reversibility

Heat engine and refrigerator

  • Heat engine
    • Takes Q₁ from the hot source
    • Delivers work W
    • Rejects Q₂ to the cold sink
    • Efficiency η = W/Q₁ = 1 − Q₂/Q₁
    • Second law: η can never be 1
  • Refrigerator
    • Takes Q₂ from the cold inside
    • Needs work W done on it
    • Rejects Q₁ = Q₂ + W to the room
    • Coefficient of performance α = Q₂/W
    • Second law: α can never be infinite

Kelvin-Planck: no process is possible whose sole result is the absorption of heat from a reservoir and the complete conversion of the heat into work. Clausius: no process is possible whose sole result is the transfer of heat from a colder object to a hotter object.

Why real processes are irreversible

  • Non-equilibrium states
    • Free expansion into a vacuum
    • Explosive chemical reactions
    • Heat flow across a finite temperature difference
  • Dissipative effects
    • Friction
    • Viscosity
    • Mechanical energy turned into internal energy
  • Ideal reversible process
    • Quasi-static at every stage
    • No dissipation
  • Heat engine: W = Q₁ − Q₂, η = 1 − Q₂/Q₁ < 1. Refrigerator: α = Q₂/W, finite.
  • Kelvin-Planck: heat cannot be completely converted into work in a cycle with no other effect.
  • Clausius: heat does not pass by itself from a colder to a hotter body.
  • Reversible = quasi-static and non-dissipative; natural processes are irreversible.
Read the full lesson

Lesson 5

The Carnot engine and its efficiency

The Carnot cycle

  1. Isothermal expansion at T₁ Absorbs Q₁ from the hot source.
  2. Adiabatic expansion No heat exchanged; cools from T₁ to T₂.
  3. Isothermal compression at T₂ Rejects Q₂ to the cold sink.
  4. Adiabatic compression No heat exchanged; heats from T₂ back to T₁.

Then back to step 1: Isothermal expansion at T₁

Carnot engine: η = 1 − Q₂/Q₁ = 1 − T₂/T₁, and Q₁/Q₂ = T₁/T₂ (T₁ = source, T₂ = sink, both in kelvin).

  • Carnot cycle: isothermal expansion, adiabatic expansion, isothermal compression, adiabatic compression.
  • η = 1 − T₂/T₁ and Q₁/Q₂ = T₁/T₂, with kelvin temperatures.
  • No engine between the same two temperatures beats a Carnot engine.
  • Carnot efficiency does not depend on the working substance.
Read the full lesson

Privacy · Terms · Refunds · Delivery