• Foundation
  • About 20 min
  • 5 practice questions

The Carnot engine and its efficiency

Describe the four steps of the Carnot cycle, use the Carnot efficiency η = 1 − T₂/T₁ and Q₁/Q₂ = T₁/T₂, and explain Carnot's theorem.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Explain why the ideal engine between two temperatures must use isothermal and adiabatic steps.
  • Describe the four steps of the Carnot cycle on a P-V diagram.
  • Use η = 1 − T₂/T₁ and Q₁/Q₂ = T₁/T₂, with temperatures in kelvin.
  • State Carnot's theorem and use it to test claims about engines.

The second law says no engine is perfect. But how good can an engine working between a hot reservoir at T₁ and a cold reservoir at T₂ possibly be? The French engineer Sadi Carnot answered this in 1824, before the laws of thermodynamics had even been fully established.

Designing the ideal engine

Irreversibility lowers efficiency, so the best engine must be reversible: quasi-static and free of dissipation. A process is not quasi-static if heat flows across a finite temperature difference. So heat must be taken from the source isothermally at T₁ and given to the sink isothermally at T₂. To change the temperature of the working substance between T₁ and T₂ without needing a whole series of reservoirs, the only reversible option is an adiabatic process, which exchanges no heat. A reversible engine working between two temperatures is called a Carnot engine, and its cycle is the Carnot cycle.

The four steps (ideal gas as working substance)

  1. 1 → 2, isothermal expansion at T₁: the gas absorbs heat Q₁ = μRT₁ ln(V₂/V₁) from the source and does an equal amount of work.
  2. 2 → 3, adiabatic expansion: the gas does work μR(T₁ − T₂)/(γ − 1) and cools from T₁ to T₂.
  3. 3 → 4, isothermal compression at T₂: work is done on the gas and it releases heat Q₂ = μRT₂ ln(V₃/V₄) to the sink.
  4. 4 → 1, adiabatic compression: work μR(T₁ − T₂)/(γ − 1) is done on the gas, heating it from T₂ back to T₁.

The Carnot cycle

  1. Isothermal expansion at T₁ Absorbs Q₁ from the hot source.
  2. Adiabatic expansion No heat exchanged; cools from T₁ to T₂.
  3. Isothermal compression at T₂ Rejects Q₂ to the cold sink.
  4. Adiabatic compression No heat exchanged; heats from T₂ back to T₁.

Then back to step 1: Isothermal expansion at T₁

Efficiency of the Carnot engine

The two adiabatic works are equal and opposite, so they cancel. The net work is W = Q₁ − Q₂ = μRT₁ ln(V₂/V₁) − μRT₂ ln(V₃/V₄). For the adiabatic steps, T₁V₂^(γ−1) = T₂V₃^(γ−1) and T₂V₄^(γ−1) = T₁V₁^(γ−1). Dividing these gives V₂/V₁ = V₃/V₄, so the two logarithms are equal and Q₂/Q₁ = T₂/T₁. Therefore:

Carnot engine: η = 1 − Q₂/Q₁ = 1 − T₂/T₁, and Q₁/Q₂ = T₁/T₂ (T₁ = source, T₂ = sink, both in kelvin).

The efficiency rises if the source is hotter or the sink colder. It could reach 1 only if T₂ = 0 K, which cannot be achieved. Run backwards, every step of the Carnot cycle can be reversed: the device takes Q₂ from the cold reservoir, has work W done on it and delivers Q₁ to the hot one, making a reversible refrigerator.

Carnot's theorem

(a) No engine working between two given temperatures can be more efficient than a Carnot engine working between the same temperatures. (b) The efficiency of a Carnot engine does not depend on the working substance. Proof idea for (a): suppose an irreversible engine I were more efficient than a Carnot engine R. Run R backwards as a refrigerator, returning to the source exactly the heat Q₁ that I takes from it. I delivers work W′ and R needs only W < W′, so the pair would produce net work W′ − W while taking exactly that heat from the sink alone, with no other change: a perfect engine, forbidden by the Kelvin-Planck statement. So η(I) cannot exceed η(R). Because Q₁/Q₂ = T₁/T₂ holds for every Carnot engine, it can define a temperature scale independent of any substance; for an ideal gas it agrees with the ideal-gas temperature.

Worked example 1: a Carnot engine

A Carnot engine works between 500 K and 300 K and absorbs 1000 J from the source per cycle. η = 1 − T₂/T₁ = 1 − 300/500 = 0.40, that is 40%. W = ηQ₁ = 0.40 × 1000 = 400 J. Q₂ = Q₁ − W = 600 J. Check: Q₁/Q₂ = 1000/600 = 5/3 = T₁/T₂ = 500/300.

Worked example 2: raising the efficiency

A Carnot engine has its sink at 27 °C and an efficiency of 40%. By how much must the source temperature be raised to make the efficiency 50%? Kelvin first: T₂ = 27 + 273 = 300 K. Now: 0.40 = 1 − 300/T₁, so T₁ = 300/0.60 = 500 K. Wanted: 0.50 = 1 − 300/T₁′, so T₁′ = 600 K. The source must be raised by 100 K.

Worked example 3: checking an inventor's claim

Someone claims an engine working between 400 K and 300 K with 60% efficiency. The Carnot limit is 1 − 300/400 = 0.25, or 25%. By Carnot's theorem no engine between these temperatures can beat 25%, so the claim is impossible.

Key takeaways

  • Carnot cycle: isothermal expansion, adiabatic expansion, isothermal compression, adiabatic compression.
  • η = 1 − T₂/T₁ and Q₁/Q₂ = T₁/T₂, with kelvin temperatures.
  • No engine between the same two temperatures beats a Carnot engine.
  • Carnot efficiency does not depend on the working substance.

Check your understanding

  1. 1. What is the efficiency of a Carnot engine working between 600 K and 300 K?

    1. 50%
    2. 100%
    3. 33%
    4. 200%
    Show answer

    Answer: A. η = 1 − T₂/T₁ = 1 − 300/600 = 0.50, that is 50%.

  2. 2. The Carnot cycle consists of

    1. two isochoric and two isobaric processes
    2. two isothermal and two adiabatic processes
    3. two isothermal and two isobaric processes
    4. four adiabatic processes
    Show answer

    Answer: B. Heat must be exchanged reversibly with the two reservoirs, which needs isothermal steps at T₁ and T₂, and the temperature must change between them without heat flow, which needs adiabatic steps.

  3. 3. A Carnot engine works between 127 °C and 27 °C. Its efficiency is

    1. 79%
    2. 21%
    3. 25%
    4. 75%
    Show answer

    Answer: C. Temperatures must be in kelvin: T₁ = 400 K, T₂ = 300 K. η = 1 − 300/400 = 0.25, that is 25%. Using Celsius values (1 − 27/127) gives the wrong answer of about 79%.

  4. 4. A Carnot engine absorbs 1200 J per cycle from a source at 600 K and rejects heat to a sink at 400 K. How much work does it do per cycle?

    1. 800 J
    2. 1200 J
    3. 600 J
    4. 400 J
    Show answer

    Answer: D. Q₂/Q₁ = T₂/T₁ = 400/600, so Q₂ = 1200 × 2/3 = 800 J. W = Q₁ − Q₂ = 1200 − 800 = 400 J (efficiency 1/3).

  5. 5. According to Carnot's theorem, the efficiency of a Carnot engine

    1. depends on whether the working substance is a gas or a liquid
    2. depends only on the temperatures of the source and sink
    3. can exceed 1 for a very hot source
    4. is greatest for an irreversible engine
    Show answer

    Answer: B. Carnot's theorem says the efficiency of a reversible engine between two temperatures is the same for any working substance, η = 1 − T₂/T₁, and that no engine can do better.

Sign in to keep track of the lessons you finish.

Next lesson → Final self-assessment: Thermodynamics

Privacy · Terms · Refunds · Delivery