• Foundation
  • About 18 min
  • 5 practice questions

Thermal equilibrium, the zeroth law and internal energy

Explain thermal equilibrium and the zeroth law, see how it defines temperature, and distinguish internal energy (a state variable) from heat and work (modes of energy transfer).

If something looks wrong, please tell us.

By the end of this lesson you can

  • Explain what thermodynamics studies and how it differs from mechanics.
  • Define thermal equilibrium and tell adiabatic walls from diathermic walls.
  • State the zeroth law and explain how it leads to the idea of temperature.
  • Distinguish internal energy, a state variable, from heat and work, which are energy in transit.

Rub your palms together on a cold morning and they warm up: work has become heat. In a steam engine the opposite happens: heat from steam pushes pistons and turns wheels. Thermodynamics is the branch of physics that deals with heat, temperature and the inter-conversion of heat and other forms of energy. It was once thought that heat was an invisible fluid ('caloric'). Count Rumford's observation in 1798, that boring a brass cannon produced heat in proportion to the work done by the horses turning the drill, and not to the sharpness of the drill, supported the modern view: heat is a form of energy.

A macroscopic science

Thermodynamics describes bulk systems by a few measurable macroscopic variables: pressure, volume, temperature, mass and composition. It does not follow individual molecules. It also ignores the motion of the system as a whole. When a bullet is fired, its kinetic energy changes but its temperature does not. Only when it stops inside a block of wood does that ordered kinetic energy turn into disordered internal motion, warming the bullet and the wood.

Thermal equilibrium and the zeroth law

In thermodynamics a system is in equilibrium when its macroscopic variables do not change with time (unlike mechanical equilibrium, which means zero net force and torque). Put two gases A and B side by side. If they are separated by an adiabatic wall, an insulating wall that lets no heat through, any pair of states of A and B can stay unchanged together. If the wall is diathermic (conducting), their pressures and volumes change until they settle into states that no longer change: A and B are then in thermal equilibrium.

Zeroth law of thermodynamics: two systems in thermal equilibrium with a third system separately are in thermal equilibrium with each other.

This law (formulated by R. H. Fowler in 1931, after the first and second laws had already been numbered) says there must be a quantity that has the same value for all bodies in thermal equilibrium with one another. That quantity is temperature. If T(A) = T(C) and T(B) = T(C), then T(A) = T(B). A thermometer is simply the third system C: when it is in equilibrium with a body, it shares that body's temperature.

How the zeroth law defines temperature

  1. A in equilibrium with C Through a conducting wall; nothing changes any more.
  2. B in equilibrium with C Again, no further change.
  3. Bring A and B into contact Nothing changes: A and B are already in equilibrium.
  4. Common property That shared property is temperature: T(A) = T(B) = T(C).

Internal energy, heat and work

The internal energy U of a system is the sum of the kinetic and potential energies of its molecules, measured in the frame in which its centre of mass is at rest. It includes only the disordered energy of random molecular motion (translation, rotation, vibration), not the kinetic energy of the system moving as a whole. U is a state variable: its value depends only on the present state (for a gas, its P, V and T), not on how that state was reached.

Take a gas in a cylinder with a piston. Its internal energy can be changed in two ways: by heat, energy that flows because of a temperature difference with the surroundings, or by work, energy transferred by other means such as pushing the piston. Heat and work are energy in transit, not things a body contains. 'A gas has a certain amount of heat' is as meaningless as 'a gas has a certain amount of work', whereas 'a gas has a certain amount of internal energy' is correct. Heat and work are not state variables; they depend on the process.

Internal energy versus heat and work

  • Internal energy U
    • Possessed by the system
    • State variable: depends only on the state
    • ΔU same for every path between two states
    • Sum of molecular kinetic and potential energies
  • Heat Q and work W
    • Energy in transit
    • Not state variables: depend on the path
    • Heat: driven by a temperature difference
    • Work: by other means, e.g. moving a piston

Worked example 1: a bullet stopping in wood

A 10 g lead bullet moving at 200 m s⁻¹ stops in a wooden block. Suppose half its kinetic energy goes into the bullet. Take s(lead) ≈ 130 J kg⁻¹ K⁻¹. Kinetic energy: ½mv² = ½ × 0.010 × 200² = 200 J. Energy to the bullet: 100 J. Temperature rise: ΔT = Q/(ms) = 100/(0.010 × 130) ≈ 77 K. The ordered motion of the bullet became disordered internal energy.

Worked example 2: work turned into internal energy

A paddle wheel in an insulated tank of 1.0 kg of water is turned so that 8372 J of work is done on the water. No heat enters or leaves. With s(water) = 4186 J kg⁻¹ K⁻¹, ΔT = 8372/(1.0 × 4186) = 2.0 K. The same rise could have been produced by heating, so looking at the warm water you cannot tell whether heat or work was used: the water stores internal energy, not 'heat'.

Key takeaways

  • Thermodynamic equilibrium: macroscopic variables do not change in time.
  • Zeroth law: two systems each in equilibrium with a third are in equilibrium with each other; this defines temperature.
  • Internal energy U is a state variable and excludes the motion of the system as a whole.
  • Heat and work are two modes of energy transfer; neither is a state variable.

Check your understanding

  1. 1. Which physical quantity does the zeroth law of thermodynamics lead to?

    1. Internal energy
    2. Temperature
    3. Entropy
    4. Work
    Show answer

    Answer: B. The zeroth law shows that bodies in thermal equilibrium share a common property. That property, equal for all bodies in mutual equilibrium, is temperature.

  2. 2. Which of these is NOT a state variable?

    1. Internal energy
    2. Pressure
    3. Temperature
    4. Heat supplied to the system
    Show answer

    Answer: D. Internal energy, pressure and temperature depend only on the present state. Heat supplied depends on the process by which the state changes, so it is not a state variable.

  3. 3. A sealed box of gas is placed on a train that speeds up from rest. Ignoring any warming from the surroundings, what happens to the internal energy of the gas?

    1. It increases by the kinetic energy of the box
    2. It decreases
    3. It does not change, because internal energy excludes the motion of the system as a whole
    4. It becomes zero
    Show answer

    Answer: C. Internal energy is measured in the frame in which the system's centre of mass is at rest. Moving the whole box adds ordered kinetic energy, not disordered molecular energy, so U and the temperature stay the same.

  4. 4. A 20 g lead bullet stops in a target and 400 J of energy goes into the bullet. With s(lead) = 130 J kg⁻¹ K⁻¹, its temperature rises by about

    1. 15 K
    2. 154 K
    3. 52 K
    4. 3.1 K
    Show answer

    Answer: B. ΔT = Q/(ms) = 400/(0.020 × 130) = 400/2.6 ≈ 154 K. Remember to convert 20 g to 0.020 kg.

  5. 5. Assertion (A): The statement 'a hot gas contains a large amount of heat' is not correct in thermodynamics. Reason (R): Heat is energy in transit because of a temperature difference; a system possesses internal energy, not heat.

    1. Both A and R are true, and R is the correct explanation of A
    2. Both A and R are true, but R is not the correct explanation of A
    3. A is true, but R is false
    4. A is false, but R is true
    Show answer

    Answer: A. Heat describes energy flowing between bodies, not energy stored in one. A hot gas has a large internal energy. So A is true, and R gives the reason.

Privacy · Terms · Refunds · Delivery