• Foundation
  • About 18 min
  • 5 practice questions

Second law, heat engines, refrigerators and reversibility

State the Kelvin-Planck and Clausius forms of the second law, calculate the efficiency of a heat engine and the coefficient of performance of a refrigerator, and distinguish reversible from irreversible processes.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Explain why the first law alone does not decide which processes happen.
  • State the Kelvin-Planck and Clausius statements of the second law.
  • Calculate the efficiency of a heat engine and the coefficient of performance of a refrigerator.
  • Explain what makes a process reversible and why natural processes are irreversible.

A book lying on a table never jumps up by itself, even though energy would be conserved if the table cooled slightly and passed that energy to the book. Many processes that obey the first law never happen. The principle that rules them out is the second law of thermodynamics. It also sets a limit on how well any engine or refrigerator can work.

Heat engines and refrigerators

A heat engine takes a working substance through a cycle: it absorbs heat Q₁ from a hot reservoir (source) at T₁, does work W, and gives out heat Q₂ to a cold reservoir (sink) at T₂. Over a cycle ΔU = 0, so W = Q₁ − Q₂. Its efficiency is η = W/Q₁ = 1 − Q₂/Q₁. A refrigerator (or heat pump) runs the other way: work W is done on the working substance so that it takes heat Q₂ from the cold inside and delivers Q₁ = Q₂ + W to the warmer surroundings. Its coefficient of performance is α = Q₂/W.

Heat engine and refrigerator

  • Heat engine
    • Takes Q₁ from the hot source
    • Delivers work W
    • Rejects Q₂ to the cold sink
    • Efficiency η = W/Q₁ = 1 − Q₂/Q₁
    • Second law: η can never be 1
  • Refrigerator
    • Takes Q₂ from the cold inside
    • Needs work W done on it
    • Rejects Q₁ = Q₂ + W to the room
    • Coefficient of performance α = Q₂/W
    • Second law: α can never be infinite

The two statements of the second law

Kelvin-Planck: no process is possible whose sole result is the absorption of heat from a reservoir and the complete conversion of the heat into work. Clausius: no process is possible whose sole result is the transfer of heat from a colder object to a hotter object.

The Kelvin-Planck statement means no heat engine can have efficiency 1 (100%): some heat must always be rejected to a sink. The Clausius statement means no refrigerator can have an infinite coefficient of performance: moving heat from cold to hot always needs work. The two statements can be proved to be completely equivalent: a device that broke one could be combined with an ordinary engine or refrigerator to break the other.

Worked example 1: efficiency of an engine

In each cycle an engine absorbs 2000 J from its source and rejects 1500 J to its sink. W = Q₁ − Q₂ = 2000 − 1500 = 500 J. η = W/Q₁ = 500/2000 = 0.25, that is 25%. Three-quarters of the heat taken in is passed on to the sink.

Worked example 2: a refrigerator

A refrigerator removes 600 J of heat from its cold compartment for every 200 J of electrical work done on it. α = Q₂/W = 600/200 = 3. The heat given out to the kitchen per cycle is Q₁ = Q₂ + W = 600 + 200 = 800 J, which is why the back of a refrigerator feels warm.

Reversible and irreversible processes

A process from state i to state f is reversible if it can be turned back so that both the system and its surroundings return to their original states, with no change anywhere else in the universe. Experience shows that spontaneous processes in nature are irreversible: a hot pan removed from the stove evens out its temperature and never re-heats its base by itself; a gas expands freely into a vacuum but never crowds back; cooking gas leaking from a cylinder spreads through the room; a petrol-air explosion cannot be undone; stirring a liquid turns work into internal energy that cannot all be turned back into work (that would break the second law).

Irreversibility has two main causes: processes that take the system through non-equilibrium states (free expansion, explosions), and dissipative effects such as friction and viscosity, which can be reduced but never removed. So a process is reversible only if it is quasi-static and free of dissipation; for example, a very slow isothermal expansion of an ideal gas in a cylinder with a frictionless piston. Reversibility matters because, as the next lesson shows, an engine using only reversible processes has the highest possible efficiency.

Why real processes are irreversible

  • Non-equilibrium states
    • Free expansion into a vacuum
    • Explosive chemical reactions
    • Heat flow across a finite temperature difference
  • Dissipative effects
    • Friction
    • Viscosity
    • Mechanical energy turned into internal energy
  • Ideal reversible process
    • Quasi-static at every stage
    • No dissipation

Key takeaways

  • Heat engine: W = Q₁ − Q₂, η = 1 − Q₂/Q₁ < 1. Refrigerator: α = Q₂/W, finite.
  • Kelvin-Planck: heat cannot be completely converted into work in a cycle with no other effect.
  • Clausius: heat does not pass by itself from a colder to a hotter body.
  • Reversible = quasi-static and non-dissipative; natural processes are irreversible.

Check your understanding

  1. 1. Which of these does the Kelvin-Planck statement of the second law forbid?

    1. A refrigerator that uses electrical work to cool food
    2. Heat flowing from a hot body to a cold one
    3. A gas expanding freely into a vacuum
    4. An engine that converts all the heat taken from a single reservoir into work, with no other effect
    Show answer

    Answer: D. Kelvin-Planck says no process can have as its only result the complete conversion of heat from a reservoir into work. A perfect engine with no heat rejected would do exactly that, so it is impossible.

  2. 2. An engine absorbs 800 J of heat per cycle and does 200 J of work. What is its efficiency?

    1. 75%
    2. 25%
    3. 33%
    4. 4%
    Show answer

    Answer: B. η = W/Q₁ = 200/800 = 0.25, that is 25%. It rejects 800 − 200 = 600 J per cycle to the sink.

  3. 3. A refrigerator extracts 1000 J of heat from its cold compartment while 250 J of work is done on it. What is its coefficient of performance?

    1. 0.25
    2. 1.25
    3. 4
    4. 5
    Show answer

    Answer: C. α = Q₂/W = 1000/250 = 4. The heat delivered to the room is 1000 + 250 = 1250 J, but that is not what α measures.

  4. 4. Which of these processes can be treated as reversible?

    1. A gas rushing into an evacuated vessel
    2. Petrol vapour exploding in an engine cylinder
    3. A block sliding to rest on a rough floor
    4. A very slow isothermal expansion of an ideal gas pushing a frictionless piston
    Show answer

    Answer: D. A reversible process must be quasi-static and free from dissipation. The slow, frictionless isothermal expansion meets both conditions; free expansion and explosions pass through non-equilibrium states, and sliding involves friction.

  5. 5. Assertion (A): No heat engine working in a cycle can have an efficiency of 100%. Reason (R): No process is possible whose sole result is the absorption of heat from a reservoir and its complete conversion into work.

    1. Both A and R are true, and R is the correct explanation of A
    2. Both A and R are true, but R is not the correct explanation of A
    3. A is true, but R is false
    4. A is false, but R is true
    Show answer

    Answer: A. R is the Kelvin-Planck statement of the second law. An engine of 100% efficiency would turn all the heat it absorbs into work with no other effect, which R forbids, so R explains A.

Sign in to keep track of the lessons you finish.

Next lesson → The Carnot engine and its efficiency

Privacy · Terms · Refunds · Delivery