• Foundation
  • About 20 min
  • 5 practice questions

First law of thermodynamics and specific heats of gases

State and apply the first law ΔQ = ΔU + ΔW with its sign convention, calculate work as PΔV and as the area under a P-V graph, and derive Cp − Cv = R for an ideal gas.

If something looks wrong, please tell us.

By the end of this lesson you can

  • State the first law of thermodynamics and its sign convention.
  • Calculate the work done by a gas at constant pressure and read it from a P-V graph.
  • Explain why the molar heat capacity of many solids is about 3R.
  • Derive Cp − Cv = R for an ideal gas and use Cp and Cv in calculations.

Energy can neither be created nor destroyed. Applied to a thermodynamic system that exchanges heat and work with its surroundings, this familiar principle becomes the first law of thermodynamics, the most used equation of the chapter.

The first law

Let ΔQ be the heat supplied to the system, ΔW the work done by the system on its surroundings, and ΔU the change in its internal energy. Conservation of energy gives:

First law: ΔQ = ΔU + ΔW. Sign convention: Q > 0 heat added to the system; Q < 0 heat removed; W > 0 work done by the system; W < 0 work done on the system.

The heat supplied partly raises the internal energy and partly does work. A system can go from one state to another by many paths; ΔQ and ΔW generally depend on the path, but their difference ΔQ − ΔW = ΔU does not, because U is a state variable. If a process has ΔU = 0 (for example, isothermal expansion of an ideal gas), then ΔQ = ΔW: all the heat supplied is used to do work.

Work done by a gas

A gas pushing a piston of area A through a small distance Δx at pressure P exerts force PA and does work PAΔx = PΔV. At constant pressure, ΔW = PΔV and the first law becomes ΔQ = ΔU + PΔV. When the pressure varies, W = ∫P dV, which is the area under the P-V curve between the initial and final volumes. Expansion (ΔV > 0) means positive work by the gas; compression means negative work by the gas (work done on it).

Worked example 1: applying the first law

A gas in a cylinder absorbs 800 J of heat and pushes the piston out, doing 300 J of work. ΔU = ΔQ − ΔW = 800 − 300 = +500 J; its internal energy rises by 500 J. If instead 300 J of work were done on the gas while it gave out 100 J of heat, then ΔQ = −100 J, ΔW = −300 J and ΔU = −100 − (−300) = +200 J.

Worked example 2: expansion at constant pressure

A gas at a constant pressure of 1.0 × 10⁵ Pa expands from 2.0 L to 5.0 L while absorbing 1000 J of heat. ΔV = 3.0 L = 3.0 × 10⁻³ m³. W = PΔV = 1.0 × 10⁵ × 3.0 × 10⁻³ = 300 J. ΔU = 1000 − 300 = 700 J.

Specific heat capacity revisited

The specific heat capacity is s = (1/m)(ΔQ/ΔT) and the molar specific heat is C = (1/μ)(ΔQ/ΔT). Both depend on the substance, the temperature and the conditions under which heat is supplied. For a solid of N atoms, each atom vibrates about a fixed point; each one-dimensional oscillator has an average energy kBT, so in three dimensions 3kBT. One mole then has U = 3kBT × NA = 3RT. Since a solid hardly changes volume, ΔQ ≈ ΔU and C = ΔU/ΔT = 3R ≈ 25 J mol⁻¹ K⁻¹, which agrees with experiment for many solids at ordinary temperatures (carbon is an exception, and the agreement fails at low temperatures).

The old unit of heat, the calorie, is the heat needed to raise 1 g of water from 14.5 °C to 15.5 °C; 1 cal = 4.186 J. Since heat is energy, the SI unit is simply the joule, and the 'mechanical equivalent of heat' is just this unit conversion.

Deriving Cp − Cv = R

  1. For one mole of gas, ΔQ = ΔU + PΔV.
  2. At constant volume ΔV = 0, so Cv = (ΔQ/ΔT)v = ΔU/ΔT. For an ideal gas U depends only on T.
  3. At constant pressure, Cp = (ΔQ/ΔT)p = ΔU/ΔT + P(ΔV/ΔT)p.
  4. For one mole of ideal gas PV = RT, so at constant P, P(ΔV/ΔT) = R.
  5. Therefore Cp = Cv + R, i.e. Cp − Cv = R.

For an ideal gas: Cp − Cv = R. Cp is larger because at constant pressure part of the heat goes into work as the gas expands.

Worked example 3: heating a gas at constant pressure

2.0 mol of a diatomic gas with Cv = 20.8 J mol⁻¹ K⁻¹ is heated at constant pressure by 10 K. Cp = Cv + R = 20.8 + 8.31 ≈ 29.1 J mol⁻¹ K⁻¹. Heat needed: Q = μCpΔT = 2.0 × 29.1 × 10 = 582 J. Rise in internal energy: ΔU = μCvΔT = 2.0 × 20.8 × 10 = 416 J. Work done: W = PΔV = μRΔT = 2.0 × 8.31 × 10 ≈ 166 J. Check: 416 + 166 = 582 J, as the first law requires.

Key takeaways

  • ΔQ = ΔU + ΔW: heat in = rise in internal energy + work done by the system.
  • W = PΔV at constant pressure; in general W is the area under the P-V curve.
  • For many solids C ≈ 3R; 1 cal = 4.186 J.
  • Ideal gas: Cv = ΔU/ΔT, Cp − Cv = R.

Check your understanding

  1. 1. A gas absorbs 500 J of heat and does 200 J of work on its surroundings. What is the change in its internal energy?

    1. +700 J
    2. +300 J
    3. −300 J
    4. −700 J
    Show answer

    Answer: B. ΔU = ΔQ − ΔW = 500 − 200 = +300 J. Heat is added (positive) and work is done by the gas (positive), so only the difference stays as internal energy.

  2. 2. 300 J of work is done on a gas while it gives out 100 J of heat. What is ΔU?

    1. +400 J
    2. −200 J
    3. +200 J
    4. −400 J
    Show answer

    Answer: C. With the sign convention, ΔQ = −100 J (heat removed) and ΔW = −300 J (work done on the gas). ΔU = ΔQ − ΔW = −100 + 300 = +200 J.

  3. 3. For an ideal gas, Cp = 29.1 J mol⁻¹ K⁻¹. Taking R = 8.31 J mol⁻¹ K⁻¹, what is Cv?

    1. 37.4 J mol⁻¹ K⁻¹
    2. 3.5 J mol⁻¹ K⁻¹
    3. 29.1 J mol⁻¹ K⁻¹
    4. 20.8 J mol⁻¹ K⁻¹
    Show answer

    Answer: D. Cp − Cv = R, so Cv = Cp − R = 29.1 − 8.31 ≈ 20.8 J mol⁻¹ K⁻¹.

  4. 4. A gas expands at a constant pressure of 2.0 × 10⁵ Pa, its volume increasing by 1.5 × 10⁻³ m³. How much work does it do?

    1. 300 J
    2. 30 J
    3. 3.0 × 10⁸ J
    4. 133 J
    Show answer

    Answer: A. W = PΔV = 2.0 × 10⁵ × 1.5 × 10⁻³ = 300 J.

  5. 5. The molar heat capacity of many solids at room temperature is close to

    1. R
    2. (3/2)R
    3. 3R
    4. 5R
    Show answer

    Answer: C. Each atom vibrates in three dimensions with average energy 3kBT, so one mole has U = 3RT and C = 3R, about 25 J mol⁻¹ K⁻¹. This matches measurements for many solids at ordinary temperatures.

Privacy · Terms · Refunds · Delivery