- Foundation
- About 22 min
- 5 practice questions
Thermodynamic processes: isothermal, adiabatic, isobaric, isochoric
Describe state variables, equations of state and quasi-static processes, and calculate heat, work and internal energy changes in isothermal, adiabatic, isochoric, isobaric and cyclic processes of an ideal gas.
If something looks wrong, please tell us.
By the end of this lesson you can
- Tell extensive from intensive variables and explain what an equation of state is.
- Explain what a quasi-static process is.
- Derive W = μRT ln(V₂/V₁) for an isothermal process and use PV^γ = constant for an adiabatic one.
- Apply the first law to isochoric, isobaric and cyclic processes.
The first law holds for every process, but how much heat becomes work depends on the conditions. Engines, refrigerators and the air in a bicycle pump all go through a few standard kinds of process, and each gives a simple special case of ΔQ = ΔU + ΔW.
State variables and equations of state
An equilibrium state of a system is fully described by its state variables, such as P, V, T and mass. A gas expanding suddenly into a vacuum, or a petrol-air mixture exploding, is not in equilibrium: its pressure and temperature are not uniform, so state variables cannot describe it. The relation between state variables is the equation of state; for an ideal gas it is PV = μRT, so for a fixed amount only two variables are independent. A P-V curve at fixed temperature is an isotherm. If a system in equilibrium is divided into two equal halves, intensive variables (P, T, density) stay the same while extensive variables (U, V, mass) are halved. In ΔQ = ΔU + PΔV every term is extensive, a useful check.
Quasi-static processes
If the pressure on a gas is suddenly reduced, the piston accelerates and the gas passes through non-equilibrium states with no well-defined P and T. To use state variables throughout, we imagine a quasi-static process: one so slow that the system is in thermal and mechanical equilibrium with its surroundings at every stage, the pressure and temperature differences being infinitesimally small. It is an idealisation, but slow processes without large temperature differences or accelerated pistons come close to it.
| Process | Kept constant | First law becomes |
|---|---|---|
| Isothermal | Temperature T | ΔU = 0 (ideal gas), so Q = W |
| Adiabatic | No heat exchange (Q = 0) | W = −ΔU |
| Isochoric | Volume V | W = 0, so Q = ΔU |
| Isobaric | Pressure P | Q = ΔU + PΔV |
| Cyclic | Returns to the initial state | ΔU = 0, so net Q = net W |
Isothermal process
At constant T, PV = constant (Boyle's law). A gas in a metal cylinder inside a very large reservoir at fixed temperature expands isothermally. The work done going from V₁ to V₂ is
- For a small change, ΔW = PΔV; summing, W = ∫ P dV from V₁ to V₂.
- Using P = μRT/V with T constant: W = μRT ∫ dV/V.
- So W = μRT ln(V₂/V₁).
- For an ideal gas U depends only on T, so ΔU = 0 and Q = W.
In isothermal expansion (V₂ > V₁) the gas absorbs heat and does an equal amount of work; in isothermal compression work is done on the gas and it releases the same amount of heat.
Worked example 1: isothermal expansion
1.0 mol of an ideal gas at 300 K expands isothermally from 10 L to 20 L. W = μRT ln(V₂/V₁) = 1.0 × 8.31 × 300 × ln 2 = 2493 × 0.693 ≈ 1.73 × 10³ J. ΔU = 0, so the gas absorbs Q = 1.73 × 10³ J of heat.
Adiabatic process
In an adiabatic process the system is insulated, so Q = 0 and W = −ΔU: work done by the gas lowers its internal energy and temperature, while work done on it (compression) heats it. For an ideal gas, quoted without proof, PV^γ = constant, where γ = Cp/Cv. Hence P₁V₁^γ = P₂V₂^γ. Integrating P dV with P = constant/V^γ gives the work done by the gas: W = (P₁V₁ − P₂V₂)/(γ − 1) = μR(T₁ − T₂)/(γ − 1). Because γ > 1, an adiabatic curve on a P-V graph is steeper than an isotherm through the same point.
Isothermal: PV = constant, W = μRT ln(V₂/V₁). Adiabatic: PV^γ = constant, W = μR(T₁ − T₂)/(γ − 1).
Worked example 2: adiabatic compression and work
(a) A monatomic ideal gas (γ = 5/3) is compressed adiabatically to half its volume. P₂/P₁ = (V₁/V₂)^γ = 2^(5/3) ≈ 3.17, compared with only 2 for an isothermal compression. (b) 2.0 mol of a diatomic gas (γ = 1.4) expands adiabatically and cools from 400 K to 300 K. W = μR(T₁ − T₂)/(γ − 1) = 2.0 × 8.31 × 100/0.4 ≈ 4.16 × 10³ J of work done by the gas, all taken from its internal energy.
Isochoric, isobaric and cyclic processes
Isochoric (constant V): no work is done, so all the heat changes the internal energy and temperature; the temperature change is set by Cv. Isobaric (constant P): W = P(V₂ − V₁) = μR(T₂ − T₁); the heat goes partly into internal energy and partly into work, and the temperature change is set by Cp. Cyclic: the system returns to its starting state, so ΔU = 0 and the net heat absorbed equals the net work done, which is the area enclosed by the loop on the P-V diagram.
Ideal-gas processes and the first law
-
Isothermal
- ΔU = 0
- Q = W = μRT ln(V₂/V₁)
-
Adiabatic
- Q = 0
- W = −ΔU
- PV^γ = constant
-
Isochoric
- W = 0
- Q = ΔU = μCvΔT
-
Isobaric
- W = PΔV = μRΔT
- Q = μCpΔT
-
Cyclic
- ΔU = 0
- Net Q = net W = area of loop
Key takeaways
- State variables describe equilibrium states; an equation of state links them.
- Quasi-static: infinitely slow, always in equilibrium.
- Isothermal: Q = W = μRT ln(V₂/V₁). Adiabatic: PV^γ = constant, W = μR(T₁ − T₂)/(γ − 1).
- Isochoric: W = 0. Isobaric: W = PΔV. Cyclic: ΔU = 0.
Check your understanding
-
1. During the isothermal expansion of an ideal gas,
- the internal energy increases and no heat is absorbed
- the internal energy is unchanged and the heat absorbed equals the work done by the gas
- no work is done
- the temperature falls
Show answer
Answer: B. The internal energy of an ideal gas depends only on temperature, which is constant, so ΔU = 0. The first law then gives Q = W: all the heat absorbed is used to do work.
-
2. A monatomic ideal gas (γ = 5/3) is compressed adiabatically to half its volume. Its pressure becomes about
- 2 times
- 1.67 times
- 3.2 times
- 4 times
Show answer
Answer: C. P₁V₁^γ = P₂V₂^γ gives P₂/P₁ = (V₁/V₂)^γ = 2^(5/3) ≈ 3.17. The pressure rises more than in an isothermal compression (factor 2) because the gas also heats up.
-
3. In an isochoric process, the heat supplied to a gas
- is all used to do work
- is all used to increase its internal energy
- is zero
- equals PΔV
Show answer
Answer: B. At constant volume no work is done (W = 0), so the first law gives Q = ΔU: all the heat raises the internal energy and temperature.
-
4. 2.0 mol of an ideal gas at 300 K expands isothermally from 5.0 L to 15 L. Taking R = 8.31 J mol⁻¹ K⁻¹ and ln 3 = 1.10, the work done by the gas is about
- 5.5 × 10³ J
- 2.5 × 10³ J
- 1.5 × 10⁴ J
- 4.99 × 10³ J
Show answer
Answer: A. W = μRT ln(V₂/V₁) = 2.0 × 8.31 × 300 × ln 3 = 4986 × 1.10 ≈ 5.5 × 10³ J.
-
5. Which of these is an intensive variable?
- Volume
- Internal energy
- Mass
- Temperature
Show answer
Answer: D. If a system in equilibrium is split into two equal halves, temperature stays the same in each half (intensive), while volume, internal energy and mass are halved (extensive).
Sign in to keep track of the lessons you finish.