- Foundation
- About 25 min
- 15 practice questions
Final self-assessment: Controlling
Test yourself on the whole course: 15 questions with answers explained.
If something looks wrong, please tell us.
Attempt all 15 questions in one sitting of about 25 minutes without looking back at the lessons. Several are case studies about made-up firms; some need a quick percentage calculation. Check your answers only after you finish, and read every explanation.
Final self-assessment
-
1. Controlling is called a goal-oriented function because:
- it is performed only by top management
- it ensures that resources are used effectively and efficiently to achieve predetermined goals
- it comes at the end of all functions
- it ignores plans
Show answer
Answer: B. Controlling ensures activities follow plans and resources are used effectively and efficiently for predetermined goals; hence it is goal-oriented.
-
2. Case: through regular checks, a made-up school finds that its standard of 'all answer scripts returned in 7 days' is impossible under a new exam pattern, and revises it. Which importance of controlling is shown?
- Ensuring order and discipline
- Facilitating coordination
- Judging accuracy of standards
- Improving employee motivation
Show answer
Answer: C. A good control system shows whether standards are accurate and objective and helps revise them in the light of changes.
-
3. Case: a made-up shop's close checks on billing reveal that a cashier has been pocketing cash. Which importance of controlling is shown?
- Ensuring order and discipline
- Judging accuracy of standards
- Improving employee motivation
- Accomplishing goals only
Show answer
Answer: A. Controlling creates order and discipline and minimises dishonest behaviour by keeping a close check on activities.
-
4. Which limitation of controlling arises when employees object to being watched by closed-circuit cameras?
- Difficulty in setting quantitative standards
- Costly affair
- Little control on external factors
- Resistance from employees
Show answer
Answer: D. Employees often see control as a restriction on their freedom and resist it, for example strict watch by cameras.
-
5. Which statement best describes the relationship between planning and controlling?
- They are independent of each other
- Controlling comes first and planning follows
- Planning provides standards for control, and control improves future planning
- Planning is evaluative and controlling is prescriptive
Show answer
Answer: C. Planning sets the standards that control needs, and control provides information that improves future planning; they are inseparable twins.
-
6. Assertion (A): Planning without controlling is meaningless. Reason (R): Once a plan is in operation, controlling monitors progress, finds deviations and takes corrective action so that events conform to plans.
- Both A and R are true, but R is not the correct explanation of A
- A is true, but R is false
- A is false, but R is true
- Both A and R are true, and R is the correct explanation of A
Show answer
Answer: D. Both are true and R explains A: without control, no one checks whether plans are being followed, so plans could go astray.
-
7. Which is the correct order of the steps of controlling?
- Comparison, setting standards, measurement, corrective action, analysis
- Setting standards, measurement, comparison, analysing deviations, corrective action
- Measurement, setting standards, comparison, analysis, corrective action
- Setting standards, comparison, measurement, corrective action, analysis
Show answer
Answer: B. Controlling follows five steps: set standards, measure actual performance, compare it with standards, analyse deviations and take corrective action.
-
8. A standard set as 'reduce defects from 10 per 1,000 pieces to 5 per 1,000 by the end of the quarter' is:
- qualitative and vague
- quantitative and precise
- a corrective action
- an external factor
Show answer
Answer: B. It states the target in numbers with a time limit, which is a precise quantitative standard that makes comparison easy.
-
9. A made-up worker's standard is 250 units a day and she makes 270. Her deviation is:
- 20 units below standard, or 8 per cent adverse
- 270 units
- 2 per cent favourable
- 20 units above standard, or 8 per cent favourable
Show answer
Answer: D. Deviation = 270 − 250 = 20 units above standard. Percentage = 20 ÷ 250 × 100 = 8 per cent, a favourable deviation.
-
10. Which statement about measurement of performance is supported by the textbook?
- It should always wait until the task is completed
- It should use different units from the standards
- Where possible it should be done during the work, in the same units as the standards
- It should be subjective
Show answer
Answer: C. Performance should be measured objectively and reliably, in the same units as standards, and where possible during performance, such as checking each part before assembly.
-
11. In a made-up manufacturing firm, which deviation is most likely to be a critical point?
- A 15 per cent rise in postal charges
- A delay in delivering the office newspaper
- A 5 per cent rise in labour cost
- A change in the colour of visitor passes
Show answer
Answer: C. Labour cost is a key result area in manufacturing; the textbook notes a 5 per cent rise in labour cost may be more troublesome than a 15 per cent rise in postal charges.
-
12. A made-up firm allows 2 per cent deviation. Budgeted power cost is ₹50,000; actual is ₹51,500. Under management by exception, the deviation is:
- 1.5 per cent and reported
- 3 per cent and reported
- 3 per cent and not reported
- 1,500 per cent and ignored
Show answer
Answer: B. Deviation = 51,500 − 50,000 = ₹1,500; percentage = 1,500 ÷ 50,000 × 100 = 3 per cent, which exceeds 2 per cent, so it is reported.
-
13. Which is listed in the textbook as a possible cause of deviations?
- Unrealistic standards
- Too much planning
- Management by exception
- Sample checking
Show answer
Answer: A. Causes of deviations include unrealistic standards, defective process, inadequate resources, structural drawbacks, organisational constraints and environmental factors.
-
14. Case: a made-up firm's output fell short because operators were never properly trained on new machines. The suitable corrective action is to:
- revise the standard downward permanently
- change material specifications
- upgrade the technology
- introduce a training programme
Show answer
Answer: D. The cause is ineffective training, so the matching corrective action is to introduce new training programmes.
-
15. Which of the following is named in the textbook's summary as a modern technique of managerial control?
- Personal observation
- Statistical reports
- Management audit
- Breakeven analysis
Show answer
Answer: C. The summary lists personal observation, statistical reports, breakeven analysis and budgetary control as traditional techniques, and return on investment, ratio analysis, responsibility accounting, management audit, PERT and CPM and MIS as modern techniques.
Questions 1-3: lesson 1 (meaning and importance). Questions 4-6: lesson 2 (limitations and the planning-controlling relationship). Questions 7-10: lesson 3 (standards, measurement and comparison). Questions 11-13: lesson 4 (analysing deviations). Questions 14-15: lesson 5 (corrective action and techniques).
Sign in to keep track of the lessons you finish.