- Foundation
- About 20 min
- 5 practice questions
Colligative properties: lowering of vapour pressure, boiling point and freezing point
Derive and use the relations for relative lowering of vapour pressure, elevation of boiling point and depression of freezing point, and use them to find the molar mass of a non-volatile solute.
If something looks wrong, please tell us.
By the end of this lesson you can
- Explain what makes a property colligative.
- Derive (p₁⁰ − p₁) ÷ p₁⁰ = x₂ and use it to find a molar mass.
- Use ΔTb = Kb m and ΔTf = Kf m, and rearrange them to find M₂.
- Explain why a solution boils higher and freezes lower than the pure solvent.
Salt is spread on icy roads in cold countries, and ethylene glycol is added to car radiators, because a dissolved solute lowers the freezing point of water. A solute also raises the boiling point and lowers the vapour pressure. Remarkably, the size of each effect depends only on how many solute particles are present, not on what they are. Such properties are called colligative properties (from Latin: 'bound together').
The four colligative properties
Colligative properties of a solution of a non-volatile solute
- Relative lowering of vapour pressure (p₁⁰ − p₁) ÷ p₁⁰ = x₂
- Elevation of boiling point ΔTb = Kb m
- Depression of freezing point ΔTf = Kf m
- Osmotic pressure π = CRT (next lesson)
1. Relative lowering of vapour pressure
For a non-volatile solute, Raoult's law for the solvent is p₁ = x₁ p₁⁰.
Lowering: Δp₁ = p₁⁰ − p₁ = p₁⁰ − p₁⁰ x₁ = p₁⁰ (1 − x₁).
Since 1 − x₁ = x₂: Δp₁ = x₂ p₁⁰.
Dividing by p₁⁰: (p₁⁰ − p₁) ÷ p₁⁰ = x₂.
The left side is the relative lowering of vapour pressure, and it equals the mole fraction of the solute.
With x₂ = n₂ ÷ (n₁ + n₂), and n₂ ≪ n₁ for a dilute solution: (p₁⁰ − p₁) ÷ p₁⁰ ≈ n₂ ÷ n₁ = (w₂ × M₁) ÷ (M₂ × w₁), where w and M are the masses and molar masses of solvent (1) and solute (2). Measuring the lowering therefore gives M₂.
Worked example 1: vapour pressure of a urea solution
6.0 g of urea (60 g mol⁻¹) is dissolved in 90 g of water at 298 K, where pure water has a vapour pressure of 23.8 mm Hg. Find the vapour pressure of the solution.
n(urea) = 6.0 ÷ 60 = 0.10 mol; n(water) = 90 ÷ 18 = 5.0 mol.
x₂ = 0.10 ÷ 5.10 = 0.0196.
Δp = x₂ p₁⁰ = 0.0196 × 23.8 = 0.467 mm Hg.
p₁ = 23.8 − 0.467 = 23.33 mm Hg. The relative lowering is 0.0196.
2. Elevation of boiling point
A liquid boils when its vapour pressure equals the external pressure (water at 373.15 K under 1.013 bar). A solution has a lower vapour pressure at every temperature, so it must be heated to a higher temperature before its vapour pressure reaches 1.013 bar. The boiling point therefore rises: ΔTb = Tb − Tb⁰.
Why a solution boils at a higher temperature
- Add a non-volatile solute Solute particles occupy part of the surface.
- Vapour pressure falls At the solvent's normal boiling point it is below the external pressure.
- Heat further Vapour pressure rises with temperature.
- Solution boils Only at Tb > Tb⁰, when vapour pressure equals external pressure.
For dilute solutions, ΔTb is proportional to molality: ΔTb = Kb m, where Kb is the molal elevation (ebullioscopic) constant, unit K kg mol⁻¹. If w₂ g of solute of molar mass M₂ is in w₁ g of solvent, m = (w₂ × 1000) ÷ (M₂ × w₁), so ΔTb = (Kb × 1000 × w₂) ÷ (M₂ × w₁), and M₂ = (Kb × 1000 × w₂) ÷ (ΔTb × w₁).
Worked example 2: boiling point of a sugar solution
34.2 g of sucrose (C₁₂H₂₂O₁₁, 342 g mol⁻¹) is dissolved in 500 g of water. Kb for water = 0.52 K kg mol⁻¹. At what temperature does the solution boil at 1.013 bar?
n = 34.2 ÷ 342 = 0.100 mol; m = 0.100 ÷ 0.500 = 0.200 mol kg⁻¹.
ΔTb = 0.52 × 0.200 = 0.104 K.
Tb = 373.15 + 0.104 = 373.25 K (to two decimal places).
3. Depression of freezing point
At the freezing point the liquid and solid solvent have equal vapour pressures and are in equilibrium. The solution's liquid has a lower vapour pressure, so the two curves meet at a lower temperature: the solution freezes below the pure solvent. ΔTf = Tf⁰ − Tf, and for dilute solutions ΔTf = Kf m, where Kf is the molal depression (cryoscopic) constant, unit K kg mol⁻¹. As before, M₂ = (Kf × 1000 × w₂) ÷ (ΔTf × w₁).
Kf and Kb depend only on the solvent: Kf = (R × M₁ × Tf²) ÷ (1000 × ΔfusH) and Kb = (R × M₁ × Tb²) ÷ (1000 × ΔvapH), with M₁ in g mol⁻¹, temperatures in kelvin and enthalpies in J mol⁻¹.
| Solvent | Kb / K kg mol⁻¹ | Kf / K kg mol⁻¹ |
|---|---|---|
| Water | 0.52 | 1.86 |
| Benzene | 2.53 | 5.12 |
| Acetic acid | 2.93 | 3.90 |
Worked example 3: molar mass from freezing point
2.0 g of a non-volatile, non-electrolyte solute dissolved in 100 g of benzene lowers its freezing point by 0.512 K. Kf for benzene = 5.12 K kg mol⁻¹. Find the molar mass.
M₂ = (Kf × 1000 × w₂) ÷ (ΔTf × w₁) = (5.12 × 1000 × 2.0) ÷ (0.512 × 100) = 10 240 ÷ 51.2 = 200 g mol⁻¹.
ΔTb = Kb m and ΔTf = Kf m, with m = (w₂ × 1000) ÷ (M₂ × w₁). Rearranged: M₂ = (K × 1000 × w₂) ÷ (ΔT × w₁).
Key takeaways
- Colligative properties depend on the number of solute particles only.
- Relative lowering of vapour pressure equals the mole fraction of the solute.
- A solution boils higher (ΔTb = Kb m) and freezes lower (ΔTf = Kf m) than the pure solvent.
- Kb and Kf belong to the solvent; each experiment can give the molar mass of the solute.
Check your understanding
-
1. The vapour pressure of a pure solvent is 100 mm Hg. A non-volatile solute is added so that its mole fraction in the solution is 0.05. What is the vapour pressure of the solution?
- 5 mm Hg
- 95 mm Hg
- 105 mm Hg
- 50 mm Hg
Show answer
Answer: B. Relative lowering = x₂, so Δp = x₂ p₁⁰ = 0.05 × 100 = 5 mm Hg. The vapour pressure of the solution = 100 − 5 = 95 mm Hg.
-
2. 0.1 mol of glucose is dissolved in 500 g of water. Kb for water = 0.52 K kg mol⁻¹. What is the elevation of boiling point?
- 0.052 K
- 0.026 K
- 0.26 K
- 0.104 K
Show answer
Answer: D. Molality = 0.1 ÷ 0.500 = 0.2 mol kg⁻¹. ΔTb = Kb m = 0.52 × 0.2 = 0.104 K.
-
3. 1.0 g of a non-electrolyte dissolved in 50 g of benzene lowers the freezing point by 0.64 K. Kf for benzene = 5.12 K kg mol⁻¹. What is the molar mass of the solute?
- 160 g mol⁻¹
- 80 g mol⁻¹
- 320 g mol⁻¹
- 128 g mol⁻¹
Show answer
Answer: A. M₂ = (Kf × 1000 × w₂) ÷ (ΔTf × w₁) = (5.12 × 1000 × 1.0) ÷ (0.64 × 50) = 5120 ÷ 32 = 160 g mol⁻¹.
-
4. Which statement about the molal elevation constant Kb is correct?
- It depends on the nature of the solute
- It depends on the molality of the solution
- It depends only on the nature of the solvent
- It has the unit mol kg⁻¹
Show answer
Answer: C. Kb = (R × M₁ × Tb²) ÷ (1000 × ΔvapH) contains only properties of the solvent: its molar mass, boiling point and enthalpy of vaporisation. Its unit is K kg mol⁻¹, and it does not depend on which solute is dissolved or how much.
-
5. Equal masses of urea (60 g mol⁻¹) and glucose (180 g mol⁻¹) are dissolved separately in equal masses of water. Which solution has the lower freezing point?
- The glucose solution
- The urea solution
- Both freeze at the same temperature
- It cannot be predicted without Kf
Show answer
Answer: B. Equal masses of the smaller-molar-mass substance give more moles. Urea gives 180 ÷ 60 = 3 times as many moles as glucose, so its molality, and hence ΔTf = Kf m, is three times larger. The urea solution freezes at the lower temperature.
Sign in to keep track of the lessons you finish.