• Foundation
  • About 18 min
  • 5 practice questions

Types of solutions and ways to express concentration

Classify solutions by the physical state of solute and solvent, and calculate mass percentage, ppm, mole fraction, molarity and molality, knowing which ones change with temperature.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Define a solution, a solvent and a solute, and name the nine types of binary solution.
  • Calculate mass %, volume %, mass by volume %, ppm and mole fraction.
  • Calculate molarity and molality and convert one into the other using density.
  • Explain why molarity changes with temperature but molality does not.

Pure substances are rare in daily life. Sea water, air, brass, a glucose drip and the coolant in a car radiator are all mixtures, and how well each one works depends on exactly how much of each component it contains. A drip that is too concentrated can harm a patient; an alloy with the wrong proportion of metals has the wrong hardness. So chemists need a precise way to say what is mixed and how much. That is the starting point of this unit.

What a solution is

A solution is a homogeneous mixture of two or more components: its composition and properties are the same in every part of it. The component present in the largest amount is usually called the solvent, and it decides the physical state of the solution. Every other component is a solute. In this unit we deal mainly with binary solutions, which have just two components.

Either component can be a gas, a liquid or a solid, which gives nine combinations. The solvent sets the name: a gaseous, liquid or solid solution.

The nine types of binary solution
Type of solutionSoluteSolventEveryday example
GaseousGasGasAir (oxygen in nitrogen)
GaseousLiquidGasWater vapour in air on a humid day
GaseousSolidGasSmell of camphor or naphthalene spreading through air
LiquidGasLiquidCarbon dioxide in soda water
LiquidLiquidLiquidEthanol mixed with water
LiquidSolidLiquidSugar or common salt in water
SolidGasSolidHydrogen absorbed in palladium
SolidLiquidSolidAmalgam of mercury with sodium
SolidSolidSolidAlloys such as brass (zinc in copper)

Binary solutions, named by the state of the solvent

  • Gaseous solutions
    • Gas in gas
    • Liquid in gas
    • Solid in gas
  • Liquid solutions
    • Gas in liquid
    • Liquid in liquid
    • Solid in liquid
  • Solid solutions
    • Gas in solid
    • Liquid in solid
    • Solid in solid

Expressing concentration

Words like 'dilute' and 'concentrated' are too vague for calculations. Chemists use the following quantitative measures. Throughout, 1 refers to the solvent and 2 to the solute.

Concentration terms at a glance
MeasureDefinitionUnitChanges with temperature?
Mass percentage (w/w)(mass of component ÷ mass of solution) × 100%No
Volume percentage (V/V)(volume of component ÷ volume of solution) × 100%Yes
Mass by volume percentage (w/V)grams of solute in 100 mL of solutiong per 100 mLYes
Parts per million (ppm)(parts of component ÷ total parts) × 10⁶ppmNo (if by mass)
Mole fraction (x)moles of component ÷ total molesnoneNo
Molarity (M)moles of solute ÷ volume of solution in litresmol L⁻¹Yes
Molality (m)moles of solute ÷ mass of solvent in kgmol kg⁻¹No

For a binary mixture of A and B, xA = nA ÷ (nA + nB) and xB = nB ÷ (nA + nB), so xA + xB = 1. For any number of components the mole fractions always add up to 1. Ppm is used for trace amounts, for example pollutants in water or dissolved oxygen in sea water.

Molarity uses the volume of the solution, and volume expands on heating, so molarity falls slightly as temperature rises. Mass %, ppm (by mass), mole fraction and molality use only masses or moles, so they do not depend on temperature.

Worked example 1: mass %, molality and mole fraction

15 g of urea (NH₂CONH₂) is dissolved in 235 g of water. Find (a) the mass percentage of urea, (b) the molality, (c) the mole fraction of urea.

Molar mass of urea = 14 × 2 + 1 × 4 + 12 + 16 = 60 g mol⁻¹; water = 18 g mol⁻¹.
(a) Mass of solution = 15 + 235 = 250 g. Mass % = (15 ÷ 250) × 100 = 6%.
(b) Moles of urea = 15 ÷ 60 = 0.25 mol. Mass of water = 0.235 kg. Molality = 0.25 ÷ 0.235 = 1.06 mol kg⁻¹.
(c) Moles of water = 235 ÷ 18 = 13.06 mol. x(urea) = 0.25 ÷ (0.25 + 13.06) = 0.25 ÷ 13.31 = 0.0188, and x(water) = 1 − 0.0188 = 0.9812.

Worked example 2: molarity

4.0 g of sodium hydroxide is dissolved in water and the solution is made up to 250 mL. Find its molarity.

Molar mass of NaOH = 23 + 16 + 1 = 40 g mol⁻¹. Moles = 4.0 ÷ 40 = 0.10 mol. Volume = 250 mL = 0.250 L. Molarity = 0.10 ÷ 0.250 = 0.40 M (0.40 mol L⁻¹).

Worked example 3: from mass % to molality and molarity

A glucose (C₆H₁₂O₆, M = 180 g mol⁻¹) solution is 10% by mass and has a density of 1.04 g mL⁻¹. Find its molality and molarity.

Take 100 g of solution: 10 g glucose and 90 g water. Moles of glucose = 10 ÷ 180 = 0.0556 mol.
Molality = 0.0556 ÷ 0.090 kg = 0.617 mol kg⁻¹.
Volume of 100 g of solution = mass ÷ density = 100 ÷ 1.04 = 96.2 mL = 0.0962 L.
Molarity = 0.0556 ÷ 0.0962 = 0.578 M.
Notice that molarity and molality are close for a dilute aqueous solution but not equal: they use different denominators.

Key takeaways

  • A solution is a homogeneous mixture; the solvent is the main component and sets the physical state.
  • Mole fractions of all components add up to 1.
  • Molarity = mol per litre of solution; molality = mol per kg of solvent.
  • Measures based on volume (molarity, V/V, w/V) change with temperature; those based on mass do not.

Check your understanding

  1. 1. Which of these concentration terms changes when the temperature of a solution changes?

    1. Molality
    2. Mole fraction
    3. Molarity
    4. Mass percentage
    Show answer

    Answer: C. Molarity is moles per litre of solution. The volume of a liquid expands when heated, so the same moles occupy more litres and molarity falls. Molality, mole fraction and mass percentage are built from masses and moles only, which do not change with temperature.

  2. 2. 9.2 g of ethanol (C₂H₅OH, 46 g mol⁻¹) is mixed with 36 g of water. What is the mole fraction of ethanol?

    1. 0.0909
    2. 0.200
    3. 0.256
    4. 0.0833
    Show answer

    Answer: A. Moles of ethanol = 9.2 ÷ 46 = 0.20 mol. Moles of water = 36 ÷ 18 = 2.0 mol. Total moles = 2.2 mol. x(ethanol) = 0.20 ÷ 2.2 = 0.0909. Dividing by the water moles alone (0.20 ÷ 2.0) is a common slip: the mole fraction always uses the total moles in the denominator.

  3. 3. 6.0 g of urea (60 g mol⁻¹) is dissolved in 500 g of water. What is the molality of the solution?

    1. 0.012 mol kg⁻¹
    2. 0.10 mol kg⁻¹
    3. 0.20 mol kg⁻¹
    4. 12 mol kg⁻¹
    Show answer

    Answer: C. Moles of urea = 6.0 ÷ 60 = 0.10 mol. Mass of solvent = 500 g = 0.500 kg. Molality = 0.10 ÷ 0.500 = 0.20 mol kg⁻¹.

  4. 4. 9.8 g of sulphuric acid (H₂SO₄, 98 g mol⁻¹) is present in 250 mL of solution. What is the molarity?

    1. 0.10 M
    2. 0.25 M
    3. 0.039 M
    4. 0.40 M
    Show answer

    Answer: D. Moles of H₂SO₄ = 9.8 ÷ 98 = 0.10 mol. Volume = 0.250 L. Molarity = 0.10 ÷ 0.250 = 0.40 M.

  5. 5. Which pair is an example of a solid solution in which the solute is a gas?

    1. Hydrogen in palladium
    2. Camphor in nitrogen
    3. Oxygen in water
    4. Copper in gold
    Show answer

    Answer: A. In a solid solution the solvent is a solid. Hydrogen gas absorbed by palladium metal is a gas dissolved in a solid. Camphor in nitrogen is a gaseous solution, oxygen in water is a liquid solution, and copper in gold is a solid dissolved in a solid.

Privacy · Terms · Refunds · Delivery