• Foundation
  • About 30 min
  • 15 practice questions

Final self-assessment: Solutions

Test yourself on the whole course: 15 questions with answers explained.

If something looks wrong, please tell us.

Attempt all 15 questions in one sitting of about 30 minutes, with a calculator but without looking back at the lessons. The questions mix all five lessons, include numericals and assertion-reason items, and are harder on average than the lesson checks. Mark your answers first, then read every explanation, including those for questions you got right.

Final self-assessment

  1. 1. A solution of NaOH (40 g mol⁻¹) contains 2.0 g of NaOH in 200 g of water. What is its molality?

    1. 0.10 mol kg⁻¹
    2. 0.25 mol kg⁻¹
    3. 0.50 mol kg⁻¹
    4. 0.025 mol kg⁻¹
    Show answer

    Answer: B. Moles of NaOH = 2.0 ÷ 40 = 0.050 mol. Mass of water = 0.200 kg. Molality = 0.050 ÷ 0.200 = 0.25 mol kg⁻¹.

  2. 2. A 20% (by mass) aqueous solution of a solute X (M = 100 g mol⁻¹) is given. What is the mole fraction of X? (water = 18 g mol⁻¹)

    1. 0.20
    2. 0.043
    3. 0.25
    4. 0.045
    Show answer

    Answer: B. In 100 g: 20 g of X = 0.20 mol and 80 g of water = 4.44 mol. x(X) = 0.20 ÷ (0.20 + 4.44) = 0.20 ÷ 4.64 = 0.043.

  3. 3. Assertion (A): Molality is preferred to molarity for expressing concentration in experiments done at different temperatures. Reason (R): Molality depends on the mass of the solvent, which does not change with temperature.

    1. Both A and R are true, and R is the correct explanation of A
    2. Both A and R are true, but R is not the correct explanation of A
    3. A is true, but R is false
    4. A is false, but R is true
    Show answer

    Answer: A. Both are true. Molarity uses volume, which changes with temperature; molality uses the mass of the solvent, which does not. R correctly explains why molality is preferred.

  4. 4. K_H for gas P in water is 2.0 × 10⁵ bar at 298 K. What is its mole fraction in water when its partial pressure is 1.0 bar?

    1. 2.0 × 10⁵
    2. 2.0 × 10⁻⁵
    3. 1.0 × 10⁻⁵
    4. 5.0 × 10⁻⁶
    Show answer

    Answer: D. x = p ÷ K_H = 1.0 ÷ (2.0 × 10⁵) = 5.0 × 10⁻⁶.

  5. 5. Which change will increase the amount of oxygen dissolved in a sample of water?

    1. Lowering the temperature of the water
    2. Heating the water
    3. Reducing the pressure of air above it
    4. Dissolving more salt in it
    Show answer

    Answer: A. Dissolving a gas is exothermic, so cooling favours dissolution; K_H falls and more oxygen dissolves. Heating and lowering the pressure both reduce gas solubility (Henry's law).

  6. 6. Pure liquids A and B have vapour pressures 400 mm Hg and 200 mm Hg. An ideal solution of them has a total vapour pressure of 280 mm Hg. What is the mole fraction of A in the liquid?

    1. 0.60
    2. 0.70
    3. 0.40
    4. 0.30
    Show answer

    Answer: C. p_total = p_B⁰ + (p_A⁰ − p_B⁰) x_A → 280 = 200 + 200 x_A → x_A = 80 ÷ 200 = 0.40.

  7. 7. In the solution of the previous question, what is the mole fraction of A in the vapour?

    1. 0.40
    2. 0.57
    3. 0.29
    4. 0.71
    Show answer

    Answer: B. p_A = 400 × 0.40 = 160 mm Hg. y_A = p_A ÷ p_total = 160 ÷ 280 = 0.57. The vapour is richer in A, the more volatile component.

  8. 8. Mixing two liquids releases heat and the final volume is slightly less than the sum of the two volumes. Which statement fits this mixture?

    1. It is an ideal solution
    2. It shows positive deviation and can form a minimum boiling azeotrope
    3. It obeys Raoult's law exactly
    4. It shows negative deviation and can form a maximum boiling azeotrope
    Show answer

    Answer: D. ΔmixH < 0 and ΔmixV < 0 mean the A–B attractions are stronger than A–A and B–B. The vapour pressure is lower than Raoult's law predicts (negative deviation), and a large negative deviation gives a maximum boiling azeotrope, like nitric acid and water.

  9. 9. 18 g of glucose (180 g mol⁻¹) is dissolved in 178.2 g of water. Pure water has a vapour pressure of 17.5 mm Hg at this temperature. What is the lowering of vapour pressure?

    1. 0.175 mm Hg
    2. 1.75 mm Hg
    3. 0.0175 mm Hg
    4. 0.35 mm Hg
    Show answer

    Answer: A. n(glucose) = 18 ÷ 180 = 0.1 mol; n(water) = 178.2 ÷ 18 = 9.9 mol. x₂ = 0.1 ÷ (0.1 + 9.9) = 0.01. Lowering = x₂ p₁⁰ = 0.01 × 17.5 = 0.175 mm Hg.

  10. 10. 0.90 g of a non-electrolyte in 50 g of water raises the boiling point by 0.052 K. Kb for water = 0.52 K kg mol⁻¹. What is the molar mass of the solute?

    1. 90 g mol⁻¹
    2. 180 g mol⁻¹
    3. 360 g mol⁻¹
    4. 18 g mol⁻¹
    Show answer

    Answer: B. M₂ = (Kb × 1000 × w₂) ÷ (ΔTb × w₁) = (0.52 × 1000 × 0.90) ÷ (0.052 × 50) = 468 ÷ 2.6 = 180 g mol⁻¹.

  11. 11. Which aqueous solution has the lowest freezing point? (Assume complete dissociation of electrolytes.)

    1. 0.1 m glucose
    2. 0.1 m NaCl
    3. 0.1 m urea
    4. 0.1 m CaCl₂
    Show answer

    Answer: D. ΔTf = i Kf m, and all have the same m. i = 1 for glucose and urea, 2 for NaCl and 3 for CaCl₂ (Ca²⁺ + 2Cl⁻). CaCl₂ gives the most particles, the largest ΔTf and therefore the lowest freezing point.

  12. 12. Assertion (A): Osmotic pressure is preferred over elevation of boiling point to find the molar masses of proteins. Reason (R): Osmotic pressure is measured at about room temperature and is large even for very dilute solutions.

    1. Both A and R are true, and R is the correct explanation of A
    2. Both A and R are true, but R is not the correct explanation of A
    3. A is true, but R is false
    4. A is false, but R is true
    Show answer

    Answer: A. Both are true. Proteins can break down on heating, and their solutions are very dilute in particles because of the huge molar mass, so ΔTb would be tiny and require heating. Osmotic pressure avoids both problems. R explains A.

  13. 13. A solution of 0.83 g of a protein in 100 mL of water has an osmotic pressure of 0.0030 bar at 300 K. What is its molar mass? (R = 0.083 L bar mol⁻¹ K⁻¹)

    1. 6.9 × 10³ g mol⁻¹
    2. 2.3 × 10³ g mol⁻¹
    3. 6.9 × 10⁴ g mol⁻¹
    4. 2.3 × 10⁴ g mol⁻¹
    Show answer

    Answer: C. M₂ = (w₂ R T) ÷ (π V) = (0.83 × 0.083 × 300) ÷ (0.0030 × 0.100) = 20.67 ÷ 0.00030 = 68 900 g mol⁻¹ ≈ 6.9 × 10⁴ g mol⁻¹.

  14. 14. Pressure greater than the osmotic pressure is applied to sea water separated from pure water by a suitable membrane. What happens?

    1. Water moves from the pure-water side into the sea water
    2. Pure water is pushed out of the sea water through the membrane
    3. Salt passes into the pure water
    4. Nothing happens
    Show answer

    Answer: B. Applying more than the osmotic pressure reverses the natural flow: this is reverse osmosis. Water molecules are forced out of the sea water through the membrane, while ions are held back. This is how desalination plants work.

  15. 15. A solute AB₂ dissociates completely in water into A²⁺ and 2B⁻. Its molar mass found from freezing point depression would be about what fraction of the true molar mass?

    1. One-third
    2. Three times
    3. One-half
    4. The same
    Show answer

    Answer: A. Each formula unit gives 3 ions, so i = 3. Since i = normal molar mass ÷ observed molar mass, the observed (abnormal) molar mass = true molar mass ÷ 3, i.e. one-third of the true value.

Questions 1-3: lesson 1 (concentration terms). Questions 4-5: lesson 2 (solubility and Henry's law). Questions 6-8: lesson 3 (Raoult's law, ideal and non-ideal solutions). Questions 9-11: lesson 4 (vapour pressure lowering, boiling and freezing points). Questions 12-15: lesson 5 (osmosis, reverse osmosis and the van't Hoff factor).

Sign in to keep track of the lessons you finish.

Privacy · Terms · Refunds · Delivery