- Foundation
- About 18 min
- 5 practice questions
Batteries, fuel cells and corrosion
Describe the reactions and features of the dry cell, mercury cell, lead storage battery and nickel–cadmium cell, explain how a hydrogen–oxygen fuel cell works, and explain rusting as an electrochemical process and how it is prevented.
If something looks wrong, please tell us.
By the end of this lesson you can
- Distinguish primary from secondary batteries with examples.
- Write the electrode reactions of the dry cell, mercury cell and lead storage battery.
- Explain the working and advantages of the H₂–O₂ fuel cell.
- Explain rusting as an electrochemical cell and describe ways to prevent corrosion.
Every battery is a galvanic cell, or several in series, packaged to be light, compact and steady in voltage. Corrosion is a galvanic cell that nobody wanted: iron quietly acts as an anode and wastes away. This lesson applies the ideas of the earlier lessons to these two very practical topics.
Primary batteries
In a primary battery the reaction happens only once; when the reactants are used up the battery is dead and cannot be recharged.
Dry cell (Leclanché cell). A zinc container is the anode; a graphite rod surrounded by powdered MnO₂ and carbon is the cathode; a moist paste of NH₄Cl and ZnCl₂ is the electrolyte. Approximately: anode Zn(s) → Zn²⁺ + 2e⁻; cathode MnO₂ + NH₄⁺ + e⁻ → MnO(OH) + NH₃. Manganese is reduced from +4 to +3, and the ammonia forms the complex [Zn(NH₃)₄]²⁺ with Zn²⁺. The cell gives nearly 1.5 V.
Mercury cell. Used in low-current devices such as hearing aids and watches. Anode: zinc–mercury amalgam; cathode: a paste of HgO and carbon; electrolyte: a paste of KOH and ZnO. Anode: Zn(Hg) + 2OH⁻ → ZnO(s) + H₂O + 2e⁻; cathode: HgO + H₂O + 2e⁻ → Hg(l) + 2OH⁻; overall: Zn(Hg) + HgO(s) → ZnO(s) + Hg(l). It gives about 1.35 V, and this stays constant through its life because the overall reaction involves no ion whose concentration changes.
Secondary batteries
A secondary battery can be recharged by passing current through it in the opposite direction, reversing the cell reaction; a good one survives many charge–discharge cycles.
Lead storage battery (vehicles, inverters). Anode: lead; cathode: a lead grid packed with PbO₂; electrolyte: about 38% sulphuric acid.
Discharge, anode: Pb(s) + SO₄²⁻(aq) → PbSO₄(s) + 2e⁻.
Discharge, cathode: PbO₂(s) + SO₄²⁻(aq) + 4H⁺(aq) + 2e⁻ → PbSO₄(s) + 2H₂O(l).
Overall: Pb(s) + PbO₂(s) + 2H₂SO₄(aq) → 2PbSO₄(s) + 2H₂O(l).
On charging, PbSO₄ on the two electrodes is turned back into Pb and PbO₂, and sulphuric acid is regenerated. Since acid is used up on discharge, the density of the electrolyte falls as the battery runs down.
Nickel–cadmium cell. Longer life than the lead battery but costlier to make. Overall discharge reaction: Cd(s) + 2Ni(OH)₃(s) → CdO(s) + 2Ni(OH)₂(s) + H₂O(l).
Types of practical cells
-
Primary (not rechargeable)
- Dry (Leclanché) cell, about 1.5 V
- Mercury cell, about 1.35 V, steady voltage
-
Secondary (rechargeable)
- Lead storage battery
- Nickel–cadmium cell
-
Fuel cells (continuous feed)
- H₂–O₂ fuel cell
- Other fuels: methane, methanol
Fuel cells
A thermal power plant burns fuel to make steam to turn a turbine, an indirect route with an efficiency of about 40%. A fuel cell is a galvanic cell that converts the energy of combustion of a fuel such as hydrogen, methane or methanol directly into electricity, with reactants fed in continuously and products removed. In the H₂–O₂ fuel cell, hydrogen and oxygen are bubbled through porous carbon electrodes into concentrated aqueous NaOH; finely divided platinum or palladium catalyses the electrode reactions.
Cathode: O₂(g) + 2H₂O(l) + 4e⁻ → 4OH⁻(aq).
Anode: 2H₂(g) + 4OH⁻(aq) → 4H₂O(l) + 4e⁻.
Overall: 2H₂(g) + O₂(g) → 2H₂O(l).
The cell runs as long as fuel is supplied, reaches about 70% efficiency, and its only product is water. Such cells powered the Apollo space missions, where the water was used for drinking.
Worked example 1: Gibbs energy of the hydrogen–oxygen fuel cell
E°cell for 2H₂ + O₂ → 2H₂O is 1.23 V, with n = 4. Find ΔrG° (F = 96 500 C mol⁻¹).
ΔrG° = −nFE°cell = −4 × 96 500 × 1.23 = −474 780 J = −474.8 kJ per mole of O₂ consumed (per 2 mol of water formed). The large negative value shows that the reaction can supply a lot of electrical work.
Worked example 2: how long a battery can run
In a lead storage battery, how much charge flows when 1 mol of Pb is converted to PbSO₄, and for how long could this supply a steady 5.0 A?
Pb → PbSO₄ releases 2 electrons per atom, so 2 mol of electrons = 2 × 96 500 = 193 000 C.
t = Q ÷ I = 193 000 ÷ 5.0 = 38 600 s ≈ 10.7 hours.
Corrosion as an electrochemical process
Corrosion slowly coats metals with oxides or salts: rusting of iron, tarnishing of silver, the green coating on copper and bronze. It damages buildings, bridges, ships and machines. Rusting needs both water and oxygen and works like a tiny galvanic cell on the iron surface.
Rusting of iron
- Anodic spot 2Fe(s) → 2Fe²⁺ + 4e⁻ (E° Fe²⁺/Fe = −0.44 V)
- Electrons travel through the iron They reach another spot on the metal.
- Cathodic spot O₂ + 4H⁺ + 4e⁻ → 2H₂O (E° = 1.23 V); H⁺ comes from CO₂ and other acidic oxides dissolved in water.
- Overall 2Fe + O₂ + 4H⁺ → 2Fe²⁺ + 2H₂O, E°cell = 1.67 V
- Rust forms Fe²⁺ is oxidised further by air to hydrated iron(III) oxide, Fe₂O₃·xH₂O.
E°cell = 1.23 − (−0.44) = 1.67 V, and ΔrG° = −4 × 96 500 × 1.67 = −644.6 kJ per mole of O₂, so rusting is strongly spontaneous. Acidic water speeds it up, which is why rusting is faster near industrial areas and the sea.
Preventing corrosion
- Barrier protection: keep air and water away with paint, oil, grease or chemicals such as bisphenol.
- Coating with another metal: tin or zinc (galvanising) covers the surface.
- Sacrificial protection: connect a more reactive metal such as magnesium or zinc. It has a lower E° than iron, so it becomes the anode and corrodes instead of the iron. Used for ship hulls, pipelines and water tanks.
Key takeaways
- Primary cells (dry, mercury) cannot be recharged; secondary cells (lead storage, Ni–Cd) can.
- Lead battery overall: Pb + PbO₂ + 2H₂SO₄ ⇌ 2PbSO₄ + 2H₂O.
- Fuel cells convert fuel energy directly to electricity, about 70% efficient, pollution-free.
- Rusting: iron is the anode, O₂ is reduced at the cathode; prevent by barriers, coatings or sacrificial metals.
Check your understanding
-
1. Why does the voltage of a mercury cell stay almost constant throughout its life?
- The overall reaction involves no ion whose concentration changes
- Mercury is a liquid
- It uses a salt bridge
- Zinc is not consumed
Show answer
Answer: A. Overall: Zn(Hg) + HgO(s) → ZnO(s) + Hg(l). All reactants and products are solids or a pure liquid, so the Nernst equation has no changing concentration term, and E stays constant.
-
2. What is formed at both electrodes of a lead storage battery during discharge?
- Pb
- PbO₂
- H₂SO₄
- PbSO₄
Show answer
Answer: D. At the anode Pb + SO₄²⁻ → PbSO₄ + 2e⁻, and at the cathode PbO₂ + SO₄²⁻ + 4H⁺ + 2e⁻ → PbSO₄ + 2H₂O. Lead sulphate forms on both, and sulphuric acid is used up.
-
3. Which reaction occurs at the cathode of an H₂–O₂ fuel cell with an alkaline electrolyte?
- 2H₂ + 4OH⁻ → 4H₂O + 4e⁻
- O₂ + 2H₂O + 4e⁻ → 4OH⁻
- 2H₂O → O₂ + 4H⁺ + 4e⁻
- H₂ → 2H⁺ + 2e⁻
Show answer
Answer: B. Reduction happens at the cathode. Oxygen gains electrons and, with water, forms hydroxide ions: O₂ + 2H₂O + 4e⁻ → 4OH⁻. The oxidation of hydrogen with OH⁻ happens at the anode.
-
4. Iron is protected by joining it to a block of magnesium. Why does this work?
- Magnesium forms an alloy with iron
- Magnesium makes the water less acidic
- Magnesium has a lower E° than iron, so it acts as the anode and corrodes instead
- Magnesium has a higher E° than iron, so iron becomes the anode
Show answer
Answer: C. E°(Mg²⁺/Mg) = −2.36 V is much lower than E°(Fe²⁺/Fe) = −0.44 V. Magnesium is oxidised in preference, giving electrons to the iron, which becomes the cathode and is protected. The magnesium is 'sacrificed' and must be replaced from time to time.
-
5. Assertion (A): Fuel cells are more efficient than thermal power plants at producing electricity. Reason (R): A fuel cell converts the chemical energy of a fuel directly into electrical energy without first producing heat and steam.
- Both A and R are true, and R is the correct explanation of A
- Both A and R are true, but R is not the correct explanation of A
- A is true, but R is false
- A is false, but R is true
Show answer
Answer: A. Both are true. A thermal plant converts chemical energy to heat, heat to mechanical energy and that to electricity, losing energy at each step (about 40% efficient). A fuel cell does it in one electrochemical step (about 70%). R explains A.
Sign in to keep track of the lessons you finish.