• Foundation
  • About 20 min
  • 5 practice questions

Nernst equation, Gibbs energy and equilibrium constant

Apply the Nernst equation to find electrode and cell potentials at any concentration, and relate E°cell to the standard Gibbs energy and the equilibrium constant of the cell reaction.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Write the Nernst equation for an electrode and for a whole cell.
  • Calculate E(cell) at 298 K using E = E° − (0.059 ÷ n) log Q.
  • Derive and use ΔrG° = −nFE°cell and E°cell = (0.059 ÷ n) log Kc.
  • Explain why the emf of a working cell falls to zero.

A new torch cell gives a steady voltage, but in real cells the concentrations are seldom exactly 1 M, and they change as the cell is used. The Nernst equation tells us how the potential depends on concentration. It also connects electrochemistry to thermodynamics: from a voltmeter reading we can calculate a Gibbs energy change and an equilibrium constant that would be very hard to measure directly.

The Nernst equation for an electrode

For the electrode reaction Mⁿ⁺(aq) + ne⁻ → M(s), Nernst showed that the potential at any concentration is:
E(Mⁿ⁺/M) = E°(Mⁿ⁺/M) − (RT ÷ nF) ln (1 ÷ [Mⁿ⁺]).
The concentration of the pure solid M is taken as 1. Here R = 8.314 J K⁻¹ mol⁻¹, F = 96 487 C mol⁻¹ (≈ 96 500), T is in kelvin, and n is the number of electrons.

Converting ln to log (ln x = 2.303 log x) and putting T = 298 K: 2.303 RT ÷ F = 2.303 × 8.314 × 298 ÷ 96 487 ≈ 0.059 V. So at 298 K: E = E° − (0.059 ÷ n) log (1 ÷ [Mⁿ⁺]). Raising the ion concentration makes the electrode potential more positive.

The Nernst equation for a cell

For the Daniell cell, subtract the anode equation from the cathode equation:
E(cell) = [E°(Cu²⁺/Cu) − (RT ÷ 2F) ln (1 ÷ [Cu²⁺])] − [E°(Zn²⁺/Zn) − (RT ÷ 2F) ln (1 ÷ [Zn²⁺])]
= E°cell − (RT ÷ 2F) ln ([Zn²⁺] ÷ [Cu²⁺]).
At 298 K: E(cell) = E°cell − (0.059 ÷ 2) log ([Zn²⁺] ÷ [Cu²⁺]). The emf rises when [Cu²⁺] is increased and falls when [Zn²⁺] is increased.

General Nernst equation at 298 K: for aA + bB + ne⁻ → cC + dD, E(cell) = E°cell − (0.059 ÷ n) log Q, where Q = [C]ᶜ[D]ᵈ ÷ ([A]ᵃ[B]ᵇ) and pure solids and liquids are left out of Q. Use the same n for both electrodes.

Worked example 1: a Daniell cell away from standard conditions

Calculate the emf at 298 K of Zn | Zn²⁺(0.10 M) || Cu²⁺(0.010 M) | Cu. E°cell = 1.10 V.

Cell reaction: Zn + Cu²⁺ → Zn²⁺ + Cu, n = 2.
Q = [Zn²⁺] ÷ [Cu²⁺] = 0.10 ÷ 0.010 = 10; log Q = 1.
E = 1.10 − (0.059 ÷ 2) × 1 = 1.10 − 0.0295 = 1.07 V.

Worked example 2: hydrogen electrode in a solution of pH 3

Find the potential of a hydrogen electrode (H₂ at 1 bar) dipped in a solution of pH 3 at 298 K.

H⁺ + e⁻ → ½H₂, n = 1, E° = 0.
E = 0 − 0.059 log (1 ÷ [H⁺]) = −0.059 × pH = −0.059 × 3 = −0.177 V.

Equilibrium constant from E°cell

As a Daniell cell works, [Zn²⁺] rises, [Cu²⁺] falls and the voltmeter reading falls. Eventually the reading becomes zero and the concentrations stop changing: the reaction has reached equilibrium, where Q = Kc. Put E(cell) = 0 into the Nernst equation:
0 = E°cell − (2.303 RT ÷ nF) log Kc
so E°cell = (2.303 RT ÷ nF) log Kc, or at 298 K, E°cell = (0.059 ÷ n) log Kc. For the Daniell cell, log Kc = (1.1 × 2) ÷ 0.059 ≈ 37.3, so Kc is about 2 × 10³⁷: the reaction goes essentially to completion.

Gibbs energy of the cell reaction

Electrical work = potential × charge. When n moles of electrons pass, the charge is nF. The maximum (reversible) work a cell can do equals the decrease in Gibbs energy, so ΔrG = −nFE(cell), and under standard conditions ΔrG° = −nFE°cell. A positive E°cell gives a negative ΔrG°: a spontaneous reaction. Note that E is intensive (it does not depend on how the equation is written) but ΔrG is extensive: doubling the equation doubles n and doubles ΔrG. Finally, ΔrG° = −RT ln K links both to the equilibrium constant.

Three linked quantities

  1. E°cell Measured with a voltmeter.
  2. ΔrG° = −nFE°cell Standard Gibbs energy of the cell reaction.
  3. ΔrG° = −RT ln K Gives the equilibrium constant.
  4. E°cell = (0.059 ÷ n) log K Back to the cell potential at 298 K.

Then back to step 1: E°cell

Worked example 3: ΔrG° and K for a nickel–silver cell

For Ni(s) + 2Ag⁺(aq) → Ni²⁺(aq) + 2Ag(s), E°(Ni²⁺/Ni) = −0.25 V and E°(Ag⁺/Ag) = +0.80 V. Find E°cell, ΔrG° and Kc at 298 K (F = 96 500 C mol⁻¹).

E°cell = 0.80 − (−0.25) = 1.05 V; n = 2.
ΔrG° = −2 × 96 500 × 1.05 = −202 650 J mol⁻¹ = −202.7 kJ mol⁻¹.
log Kc = (n × E°cell) ÷ 0.059 = (2 × 1.05) ÷ 0.059 = 35.59, so Kc ≈ 3.9 × 10³⁵.

Key takeaways

  • At 298 K: E = E° − (0.059 ÷ n) log Q; leave pure solids and liquids out of Q.
  • For a hydrogen electrode with H₂ at 1 bar, E = −0.059 × pH.
  • At equilibrium E(cell) = 0, so E°cell = (0.059 ÷ n) log Kc.
  • ΔrG° = −nFE°cell: positive E°cell means a spontaneous reaction.

Check your understanding

  1. 1. What is the emf at 298 K of Zn | Zn²⁺(1.0 M) || Cu²⁺(0.010 M) | Cu if E°cell = 1.10 V?

    1. 1.16 V
    2. 1.10 V
    3. 1.04 V
    4. 1.07 V
    Show answer

    Answer: C. Q = [Zn²⁺] ÷ [Cu²⁺] = 1.0 ÷ 0.010 = 100, so log Q = 2. E = 1.10 − (0.059 ÷ 2) × 2 = 1.10 − 0.059 = 1.041 ≈ 1.04 V.

  2. 2. What is the potential of a hydrogen electrode (H₂ at 1 bar) in a solution of pH 4 at 298 K?

    1. −0.236 V
    2. +0.236 V
    3. −0.059 V
    4. 0.00 V
    Show answer

    Answer: A. E = −0.059 × pH = −0.059 × 4 = −0.236 V.

  3. 3. A cell reaction with n = 2 has E°cell = 0.30 V at 298 K. What is ΔrG°? (F = 96 500 C mol⁻¹)

    1. −28.9 kJ mol⁻¹
    2. +57.9 kJ mol⁻¹
    3. −115.8 kJ mol⁻¹
    4. −57.9 kJ mol⁻¹
    Show answer

    Answer: D. ΔrG° = −nFE°cell = −2 × 96 500 × 0.30 = −57 900 J mol⁻¹ = −57.9 kJ mol⁻¹. The negative sign shows the reaction is spontaneous.

  4. 4. For a cell reaction with n = 1 at 298 K, E°cell = 0.118 V. What is the equilibrium constant?

    1. 10
    2. 100
    3. 1000
    4. 2
    Show answer

    Answer: B. log K = (n × E°cell) ÷ 0.059 = (1 × 0.118) ÷ 0.059 = 2, so K = 10² = 100.

  5. 5. Assertion (A): The emf of a Daniell cell gradually falls to zero while it is in use. Reason (R): As the cell works, [Zn²⁺] increases and [Cu²⁺] decreases until the reaction reaches equilibrium.

    1. Both A and R are true, and R is the correct explanation of A
    2. Both A and R are true, but R is not the correct explanation of A
    3. A is true, but R is false
    4. A is false, but R is true
    Show answer

    Answer: A. Both are true. By the Nernst equation, E = E° − (0.059 ÷ 2) log ([Zn²⁺] ÷ [Cu²⁺]); as the ratio grows, E falls. At equilibrium Q = K and E = 0. R explains A.

Privacy · Terms · Refunds · Delivery