- Foundation
- About 20 min
- 5 practice questions
Galvanic cells and standard electrode potentials
Describe how a galvanic cell such as the Daniell cell works, write cell notation, explain the standard hydrogen electrode and use standard electrode potentials to find E°cell and predict whether a redox reaction is feasible.
If something looks wrong, please tell us.
By the end of this lesson you can
- Distinguish a galvanic cell from an electrolytic cell.
- Identify the anode and cathode, the half-reactions and the role of the salt bridge.
- Write a cell in standard notation and calculate E°cell = E°right − E°left.
- Use the electrochemical series to compare oxidising and reducing strength.
Every torch cell, mobile phone battery and car battery turns the energy of a chemical reaction into electricity. The reverse also matters: sodium, aluminium, chlorine and caustic soda are made by forcing reactions to happen with electricity. Electrochemistry studies both directions. This lesson starts with cells that produce electricity.
Galvanic and electrolytic cells
The Daniell cell has a zinc rod in zinc sulphate solution and a copper rod in copper sulphate solution, joined by a wire outside and a salt bridge between the solutions. The spontaneous reaction Zn(s) + Cu²⁺(aq) → Zn²⁺(aq) + Cu(s) drives electrons through the wire. With both ion concentrations at 1 mol L⁻¹ it gives about 1.1 V. A device that converts the Gibbs energy of a spontaneous redox reaction into electrical work is a galvanic (voltaic) cell.
Now connect an external voltage that opposes the cell. While it is less than 1.1 V the cell still works forwards. At exactly 1.1 V no current flows and the reaction stops. Above 1.1 V the reaction runs backwards: zinc is deposited and copper dissolves. The device is now an electrolytic cell, which uses electrical energy to drive a non-spontaneous reaction.
Galvanic cell versus electrolytic cell
-
Galvanic cell
- Chemical energy → electrical energy
- Reaction is spontaneous (ΔG < 0)
- Anode is negative, cathode is positive
- Example: Daniell cell, dry cell
-
Electrolytic cell
- Electrical energy → chemical energy
- Reaction is non-spontaneous; driven by external source
- Anode is positive, cathode is negative
- Example: electrolysis of molten NaCl
Half-cells, electrodes and the salt bridge
The cell reaction is the sum of two half-reactions. At the zinc electrode: Zn(s) → Zn²⁺(aq) + 2e⁻ (oxidation). At the copper electrode: Cu²⁺(aq) + 2e⁻ → Cu(s) (reduction). Each metal-in-solution part is a half-cell or redox couple. The electrode where oxidation occurs is the anode; where reduction occurs is the cathode. Electrons flow in the outer wire from anode to cathode; conventional current flows the other way.
The salt bridge (for example KCl or KNO₃ in agar jelly) connects the two solutions. It completes the circuit by letting ions move, and it keeps each solution electrically neutral; without it the current stops almost at once.
At each electrode, metal atoms tend to leave as ions and metal ions tend to deposit. The balance creates a charge separation and a potential difference between electrode and solution, the electrode potential. When all species are at unit concentration (1 M, gases at 1 bar) it is the standard electrode potential, E°. By IUPAC convention, these are written as reduction potentials.
Cell notation and cell emf
A cell is written with the anode on the left and the cathode on the right; a single vertical line separates an electrode from its solution and a double line stands for the salt bridge. For example, the cell based on Cu(s) + 2Ag⁺(aq) → Cu²⁺(aq) + 2Ag(s) is written Cu(s) | Cu²⁺(aq) || Ag⁺(aq) | Ag(s). The potential difference when no current is drawn is the emf of the cell.
E°cell = E°right − E°left = E°cathode − E°anode (both written as reduction potentials). A positive E°cell means the cell reaction, as written, is spontaneous.
The standard hydrogen electrode (SHE)
The potential of a single half-cell cannot be measured; only differences can. So one electrode is chosen as the zero. The standard hydrogen electrode, Pt(s) | H₂(g, 1 bar) | H⁺(aq, 1 M), is a platinum electrode coated with platinum black, dipped in acid of unit concentration with pure hydrogen at 1 bar bubbled over it. It is assigned E° = 0 V at all temperatures for H⁺(aq) + e⁻ → ½H₂(g). Pairing any half-cell, as the cathode, with the SHE as the anode gives that half-cell's standard potential directly. Platinum and gold are used as inert electrodes: they only supply a surface and carry electrons.
| Half-reaction (reduction) | E° / V at 298 K |
|---|---|
| F₂ + 2e⁻ → 2F⁻ | +2.87 |
| Cl₂ + 2e⁻ → 2Cl⁻ | +1.36 |
| Ag⁺ + e⁻ → Ag | +0.80 |
| Fe³⁺ + e⁻ → Fe²⁺ | +0.77 |
| I₂ + 2e⁻ → 2I⁻ | +0.54 |
| Cu²⁺ + 2e⁻ → Cu | +0.34 |
| 2H⁺ + 2e⁻ → H₂ | 0.00 |
| Ni²⁺ + 2e⁻ → Ni | −0.25 |
| Fe²⁺ + 2e⁻ → Fe | −0.44 |
| Zn²⁺ + 2e⁻ → Zn | −0.76 |
| Mg²⁺ + 2e⁻ → Mg | −2.36 |
| Li⁺ + e⁻ → Li | −3.05 |
Reading the series. The higher (more positive) E°, the stronger the species on the left is as an oxidising agent: F₂ is the strongest. The lower (more negative) E°, the stronger the species on the right is as a reducing agent: lithium metal is the strongest in water. A positive E° (copper, +0.34 V) means the ion is reduced more easily than H⁺, so copper does not displace hydrogen from dilute HCl. A negative E° (zinc, −0.76 V) means the metal reduces H⁺, so zinc dissolves in acid.
Worked example 1: emf of a zinc–silver cell
Find E°cell for Zn(s) | Zn²⁺(aq) || Ag⁺(aq) | Ag(s), and write the cell reaction.
Anode (left): Zn → Zn²⁺ + 2e⁻. Cathode (right): 2Ag⁺ + 2e⁻ → 2Ag.
Cell reaction: Zn(s) + 2Ag⁺(aq) → Zn²⁺(aq) + 2Ag(s).
E°cell = E°(Ag⁺/Ag) − E°(Zn²⁺/Zn) = 0.80 − (−0.76) = 1.56 V. Note that E° is not doubled when the silver half-reaction is multiplied by 2: electrode potential is an intensive property.
Worked example 2: is the reaction feasible?
Can a solution of Fe³⁺ ions oxidise iodide ions to iodine under standard conditions?
Proposed reaction: 2Fe³⁺ + 2I⁻ → 2Fe²⁺ + I₂. Fe³⁺ is reduced (cathode) and I⁻ is oxidised (anode).
E°cell = E°(Fe³⁺/Fe²⁺) − E°(I₂/I⁻) = 0.77 − 0.54 = +0.23 V. Positive, so yes, the reaction is feasible.
By the same method, Fe³⁺ cannot oxidise Br⁻: E°cell = 0.77 − 1.09 = −0.32 V, which is negative.
Key takeaways
- Galvanic cell: spontaneous reaction makes electricity; electrolytic cell: electricity drives a reaction.
- Oxidation at the anode, reduction at the cathode; anode is written on the left.
- SHE is the zero of the scale; E°cell = E°cathode − E°anode.
- Higher E°: stronger oxidising agent; lower E°: stronger reducing agent.
Check your understanding
-
1. Using E°(Mg²⁺/Mg) = −2.36 V and E°(Cu²⁺/Cu) = +0.34 V, what is E°cell for Mg(s) | Mg²⁺ || Cu²⁺ | Cu(s)?
- 2.02 V
- 2.70 V
- −2.70 V
- 1.35 V
Show answer
Answer: B. E°cell = E°cathode − E°anode = 0.34 − (−2.36) = 2.70 V. Copper is the cathode (right) and magnesium the anode (left).
-
2. Why should copper sulphate solution not be stored in a zinc vessel?
- Zinc is a weaker reducing agent than copper
- Copper sulphate is non-polar
- Zinc reduces Cu²⁺ ions, so the vessel dissolves while copper is deposited
- Zinc and copper sulphate form an alloy
Show answer
Answer: C. E°(Zn²⁺/Zn) = −0.76 V is lower than E°(Cu²⁺/Cu) = +0.34 V, so zinc is the stronger reducing agent. Zn + Cu²⁺ → Zn²⁺ + Cu has E°cell = 1.10 V, positive and spontaneous, so the zinc vessel would be eaten away.
-
3. Which is the strongest oxidising agent among F₂, Cl₂, Ag⁺ and Cu²⁺?
- F₂
- Cl₂
- Ag⁺
- Cu²⁺
Show answer
Answer: A. The strongest oxidising agent is the species most easily reduced, i.e. the one with the highest standard reduction potential. F₂ has E° = +2.87 V, higher than Cl₂ (+1.36 V), Ag⁺ (+0.80 V) and Cu²⁺ (+0.34 V).
-
4. What is the function of the salt bridge in a galvanic cell?
- It supplies electrons to the cathode
- It completes the circuit and keeps both solutions electrically neutral
- It increases the emf of the cell
- It allows the two solutions to mix freely
Show answer
Answer: B. Ions move through the salt bridge, completing the internal circuit. Its ions balance the charge as cations form at the anode and are removed at the cathode, so neither solution builds up a charge that would stop the current. It does not carry electrons and does not change E°.
-
5. Assertion (A): Copper does not liberate hydrogen gas from dilute hydrochloric acid. Reason (R): The standard electrode potential of Cu²⁺/Cu is positive.
- Both A and R are true, and R is the correct explanation of A
- Both A and R are true, but R is not the correct explanation of A
- A is true, but R is false
- A is false, but R is true
Show answer
Answer: A. Both are true. E°(Cu²⁺/Cu) = +0.34 V means Cu²⁺ is reduced more easily than H⁺, so the reverse, H⁺ oxidising Cu, has a negative E°cell (0.00 − 0.34 = −0.34 V) and does not happen. R explains A.
Sign in to keep track of the lessons you finish.