• Foundation
  • About 20 min
  • 5 practice questions

Electrolytic cells, electrolysis and Faraday's laws

Explain electrolysis in an electrolytic cell, apply Faraday's first and second laws with Q = It and F = 96 500 C mol⁻¹, and predict the products of electrolysis from electrode potentials and overpotential.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Describe what happens at each electrode when copper sulphate is electrolysed with copper electrodes.
  • State Faraday's two laws of electrolysis.
  • Calculate the mass deposited, the charge or the time using Q = It and the electrode equation.
  • Predict the products of electrolysis of molten NaCl, aqueous NaCl and sulphuric acid.

Sodium, magnesium and aluminium are too reactive to be obtained by ordinary chemical reduction, so industry uses electricity instead. Copper wire must be extremely pure, and it is purified electrolytically. Behind both lies a simple, exact relationship between the charge passed and the amount of substance changed, discovered by Michael Faraday.

What happens in an electrolytic cell

Consider two copper strips in copper sulphate solution, connected to a DC supply. At the cathode (negative), Cu²⁺(aq) + 2e⁻ → Cu(s): copper is deposited. At the anode (positive), Cu(s) → Cu²⁺(aq) + 2e⁻: copper dissolves. This is the basis of electrolytic refining: impure copper is made the anode and pure copper collects on the cathode. Sodium and magnesium are made by electrolysing their molten chlorides, and aluminium by electrolysing aluminium oxide dissolved in molten cryolite.

Faraday's laws of electrolysis

First law: the amount of chemical reaction at an electrode is proportional to the quantity of electricity passed. Second law: when the same quantity of electricity passes through different electrolytes, the amounts of substances liberated are proportional to their chemical equivalent weights (atomic mass ÷ number of electrons needed per ion).

The Faraday constant. Charge passed Q = I × t (coulombs = amperes × seconds). The charge on one mole of electrons is N_A × e = 6.022 × 10²³ × 1.602 × 10⁻¹⁹ C ≈ 96 487 C mol⁻¹. This is 1 faraday (F); we use F ≈ 96 500 C mol⁻¹ for calculations. The electrode equation tells how many faradays each mole needs: Ag⁺ + e⁻ → Ag needs 1 F per mole; Mg²⁺ + 2e⁻ → Mg needs 2 F; Al³⁺ + 3e⁻ → Al needs 3 F.

Steps in an electrolysis calculation

  1. Find the charge Q = I × t, with t in seconds.
  2. Convert to moles of electrons n(e⁻) = Q ÷ 96 500.
  3. Use the electrode equation Moles of product = n(e⁻) ÷ electrons per formula unit.
  4. Convert to mass or volume Mass = moles × molar mass.

Worked example 1: mass of silver deposited

A current of 2.0 A is passed through silver nitrate solution for 965 s. What mass of silver is deposited? (Ag = 108 g mol⁻¹)

Q = 2.0 × 965 = 1930 C.
n(e⁻) = 1930 ÷ 96 500 = 0.020 mol.
Ag⁺ + e⁻ → Ag, so n(Ag) = 0.020 mol.
Mass = 0.020 × 108 = 2.16 g.

Worked example 2: charge and time to make aluminium

How much charge is needed to produce 9.0 g of aluminium from molten Al₂O₃, and how long would a 10 A current take? (Al = 27 g mol⁻¹)

n(Al) = 9.0 ÷ 27 = 0.333 mol. Al³⁺ + 3e⁻ → Al, so n(e⁻) = 3 × 0.333 = 1.0 mol.
Q = 1.0 × 96 500 = 96 500 C (1 F).
t = Q ÷ I = 96 500 ÷ 10 = 9650 s (about 2 h 41 min).

Worked example 3: cells in series (second law)

Two cells containing AgNO₃ and CuSO₄ are connected in series. When 1.08 g of silver is deposited in the first, what mass of copper is deposited in the second? (Ag = 108, Cu = 63.5 g mol⁻¹)

The same charge passes through both. n(Ag) = 1.08 ÷ 108 = 0.010 mol, so n(e⁻) = 0.010 mol.
Cu²⁺ + 2e⁻ → Cu, so n(Cu) = 0.010 ÷ 2 = 0.0050 mol.
Mass of Cu = 0.0050 × 63.5 = 0.3175 g (about 0.318 g). Check with equivalent weights: 108 ÷ 1 = 108 for Ag and 63.5 ÷ 2 = 31.75 for Cu; 1.08 × 31.75 ÷ 108 = 0.3175 g.

Products of electrolysis

The products depend on what is being electrolysed and on the electrodes. Inert electrodes (Pt, Au) only supply or take electrons; reactive electrodes (e.g. copper in CuSO₄) take part. When several species can react, compare electrode potentials: at the cathode the reduction with the higher E° is preferred; at the anode the oxidation that is easiest (lower reduction potential for the couple) is preferred. Some reactions, although favoured on paper, are so slow that they need an extra voltage called overpotential, which can change the outcome.

Predicting products of electrolysis
Electrolyte (electrodes)Cathode productAnode productReason
Molten NaCl (inert)Na metalCl₂Only Na⁺ and Cl⁻ present
Aqueous NaCl (inert)H₂ (and OH⁻ left in solution)Cl₂Water (E° −0.83 V) is reduced in preference to Na⁺ (−2.71 V); O₂ would be expected at the anode (1.23 V vs 1.36 V) but its overpotential makes Cl₂ form
Dilute H₂SO₄ (inert)H₂O₂Water oxidised (1.23 V) in preference to SO₄²⁻ → S₂O₈²⁻ (1.96 V)
Concentrated H₂SO₄ (inert)H₂S₂O₈²⁻ (peroxodisulphate)High sulphate concentration favours its oxidation
Aqueous CuSO₄ (copper)CuCu dissolves as Cu²⁺Reactive anode; basis of refining

So electrolysis of brine gives three useful products: H₂ at the cathode, Cl₂ at the anode and sodium hydroxide in the solution. Net: NaCl(aq) + H₂O(l) → Na⁺(aq) + OH⁻(aq) + ½H₂(g) + ½Cl₂(g).

Key takeaways

  • Q = It; 1 F = 96 487 C ≈ 96 500 C = charge on 1 mol of electrons.
  • Moles of product = (Q ÷ F) ÷ electrons per ion.
  • In series, the same charge deposits amounts proportional to equivalent weights.
  • Products depend on electrode potentials, concentrations, overpotential and whether the electrodes are inert.

Check your understanding

  1. 1. How many faradays are needed to reduce 1 mol of MnO₄⁻ to Mn²⁺?

    1. 2 F
    2. 3 F
    3. 5 F
    4. 7 F
    Show answer

    Answer: C. Manganese changes from +7 in MnO₄⁻ to +2 in Mn²⁺, a gain of 5 electrons per ion: MnO₄⁻ + 8H⁺ + 5e⁻ → Mn²⁺ + 4H₂O. So 5 mol of electrons, i.e. 5 F, are needed.

  2. 2. A current of 2.0 A flows through a CuSO₄ solution for 30 minutes. What mass of copper is deposited? (Cu = 63.5 g mol⁻¹, F = 96 500 C mol⁻¹)

    1. 1.18 g
    2. 2.37 g
    3. 0.59 g
    4. 11.8 g
    Show answer

    Answer: A. Q = 2.0 × 1800 = 3600 C. n(e⁻) = 3600 ÷ 96 500 = 0.0373 mol. Cu²⁺ + 2e⁻ → Cu, so n(Cu) = 0.01865 mol. Mass = 0.01865 × 63.5 = 1.18 g.

  3. 3. What are the products at the cathode and anode when aqueous sodium chloride is electrolysed with platinum electrodes?

    1. Na at the cathode, Cl₂ at the anode
    2. H₂ at the cathode, Cl₂ at the anode
    3. H₂ at the cathode, O₂ at the anode
    4. Na at the cathode, O₂ at the anode
    Show answer

    Answer: B. At the cathode water (E° = −0.83 V) is reduced much more readily than Na⁺ (−2.71 V), giving H₂ and OH⁻. At the anode O₂ formation is slightly favoured by E°, but its overpotential is high, so Cl⁻ is oxidised to Cl₂.

  4. 4. How many coulombs are needed to produce 1 mol of O₂ gas by electrolysing water? (2H₂O → O₂ + 4H⁺ + 4e⁻; F = 96 500 C mol⁻¹)

    1. 96 500 C
    2. 193 000 C
    3. 386 000 C
    4. 48 250 C
    Show answer

    Answer: C. Each mole of O₂ needs 4 mol of electrons to be removed from water. Charge = 4 × 96 500 = 386 000 C.

  5. 5. Assertion (A): When the same quantity of electricity passes through AgNO₃ and CuSO₄ solutions in series, the mass of silver deposited is more than three times the mass of copper deposited. Reason (R): The amounts deposited are proportional to equivalent weights, which are 108 for silver and 31.75 for copper.

    1. Both A and R are true, and R is the correct explanation of A
    2. Both A and R are true, but R is not the correct explanation of A
    3. A is true, but R is false
    4. A is false, but R is true
    Show answer

    Answer: A. Both are true. Mass ratio Ag : Cu = 108 : 31.75 = 3.4 : 1, which is more than three. R, Faraday's second law with the correct equivalent weights, explains A.

Sign in to keep track of the lessons you finish.

Next lesson → Batteries, fuel cells and corrosion

Privacy · Terms · Refunds · Delivery