• Foundation
  • About 30 min
  • 15 practice questions

Final self-assessment: Electrochemistry

Test yourself on the whole course: 15 questions with answers explained.

If something looks wrong, please tell us.

Attempt all 15 questions in one sitting of about 30 minutes, with a calculator and the standard values given in the questions. Use F = 96 500 C mol⁻¹ and 2.303RT/F = 0.059 V at 298 K. The questions are harder on average than the lesson checks. Mark your answers first, then read every explanation.

Final self-assessment

  1. 1. Using E°(Ni²⁺/Ni) = −0.25 V and E°(Ag⁺/Ag) = +0.80 V, which statement about the cell Ni | Ni²⁺ || Ag⁺ | Ag is correct?

    1. Silver is the anode and E°cell = 0.55 V
    2. Nickel is the cathode and E°cell = 1.05 V
    3. Nickel is the anode and E°cell = 1.05 V
    4. Nickel is the anode and E°cell = 0.55 V
    Show answer

    Answer: C. Nickel, written on the left with the lower E°, is oxidised, so it is the anode. E°cell = E°cathode − E°anode = 0.80 − (−0.25) = 1.05 V.

  2. 2. Which metal, among Cu, Fe, Mg and Zn, can displace all the other three from solutions of their salts?

    1. Mg
    2. Zn
    3. Fe
    4. Cu
    Show answer

    Answer: A. A metal displaces another if its E° is lower. Order of E°: Mg (−2.36) < Zn (−0.76) < Fe (−0.44) < Cu (+0.34). Magnesium has the lowest E°, so it is the strongest reducing agent and displaces all the others.

  3. 3. Assertion (A): The standard hydrogen electrode is assigned an electrode potential of zero. Reason (R): The absolute potential of a single half-cell cannot be measured, so a reference electrode is needed.

    1. Both A and R are true, and R is the correct explanation of A
    2. Both A and R are true, but R is not the correct explanation of A
    3. A is true, but R is false
    4. A is false, but R is true
    Show answer

    Answer: A. Both are true. Only potential differences between two electrodes can be measured, so a reference half-cell is fixed at zero by convention, and the SHE was chosen. R explains A.

  4. 4. What is the emf at 298 K of Mg | Mg²⁺(0.010 M) || Cu²⁺(0.10 M) | Cu? (E°cell = 2.70 V)

    1. 2.73 V
    2. 2.67 V
    3. 2.76 V
    4. 2.64 V
    Show answer

    Answer: A. Q = [Mg²⁺] ÷ [Cu²⁺] = 0.010 ÷ 0.10 = 0.1; log Q = −1; n = 2. E = 2.70 − (0.059 ÷ 2) × (−1) = 2.70 + 0.0295 = 2.73 V.

  5. 5. For a cell reaction with n = 2 and E°cell = 0.295 V at 298 K, what is the equilibrium constant?

    1. 10⁵
    2. 10²⁰
    3. 10⁵⁰
    4. 10¹⁰
    Show answer

    Answer: D. log K = (n × E°cell) ÷ 0.059 = (2 × 0.295) ÷ 0.059 = 10, so K = 10¹⁰.

  6. 6. For the reaction Zn + Cu²⁺ → Zn²⁺ + Cu, ΔrG° is −212 kJ mol⁻¹. What is ΔrG° for 2Zn + 2Cu²⁺ → 2Zn²⁺ + 2Cu, and what is E°cell for it?

    1. −424 kJ mol⁻¹ and 1.1 V
    2. −424 kJ mol⁻¹ and 2.2 V
    3. −212 kJ mol⁻¹ and 2.2 V
    4. −212 kJ mol⁻¹ and 1.1 V
    Show answer

    Answer: A. ΔrG is extensive: doubling the equation doubles n (from 2 to 4) and doubles ΔrG° to −424 kJ mol⁻¹. E°cell is intensive and stays the same: E° = −ΔrG° ÷ nF = 424 000 ÷ (4 × 96 500) ≈ 1.1 V.

  7. 7. A conductivity cell has a cell constant of 0.50 cm⁻¹. Filled with a 0.010 M solution, its resistance is 400 Ω. What is the molar conductivity?

    1. 12.5 S cm² mol⁻¹
    2. 250 S cm² mol⁻¹
    3. 125 S cm² mol⁻¹
    4. 1.25 S cm² mol⁻¹
    Show answer

    Answer: C. κ = G* ÷ R = 0.50 ÷ 400 = 1.25 × 10⁻³ S cm⁻¹. Λm = κ × 1000 ÷ M = 1.25 × 10⁻³ × 1000 ÷ 0.010 = 125 S cm² mol⁻¹.

  8. 8. Λ°m values of HCl, CH₃COONa and NaCl are 425.9, 91.0 and 126.4 S cm² mol⁻¹. What is Λ°m of CH₃COOH?

    1. 643.3 S cm² mol⁻¹
    2. 390.5 S cm² mol⁻¹
    3. 208.5 S cm² mol⁻¹
    4. 461.3 S cm² mol⁻¹
    Show answer

    Answer: B. By Kohlrausch's law, Λ°m(CH₃COOH) = Λ°m(HCl) + Λ°m(CH₃COONa) − Λ°m(NaCl) = 425.9 + 91.0 − 126.4 = 390.5 S cm² mol⁻¹. The Na⁺ and Cl⁻ contributions cancel.

  9. 9. A dilute solution of a weak acid HA has Λm = 19.5 S cm² mol⁻¹, and its Λ°m is 390 S cm² mol⁻¹. What is its degree of dissociation?

    1. 0.005
    2. 0.5
    3. 0.20
    4. 0.05
    Show answer

    Answer: D. α = Λm ÷ Λ°m = 19.5 ÷ 390 = 0.05, i.e. 5% dissociated.

  10. 10. For a strong electrolyte, a graph of Λm (y-axis) against √c (x-axis) is a straight line. What do its intercept and slope give?

    1. Intercept = Λ°m, slope = −A
    2. Intercept = −A, slope = Λ°m
    3. Intercept = κ, slope = Λ°m
    4. Intercept = 0, slope = Λ°m
    Show answer

    Answer: A. Λm = Λ°m − A√c has the form y = c + mx with intercept Λ°m (the value at zero concentration) and slope −A.

  11. 11. How many faradays are needed to produce 13.5 g of aluminium from molten Al₂O₃? (Al = 27 g mol⁻¹)

    1. 0.5 F
    2. 3 F
    3. 1.5 F
    4. 4.5 F
    Show answer

    Answer: C. n(Al) = 13.5 ÷ 27 = 0.50 mol. Al³⁺ + 3e⁻ → Al, so electrons = 3 × 0.50 = 1.5 mol = 1.5 F.

  12. 12. A current of 3.0 A is passed through a nickel(II) sulphate solution for 40 minutes using platinum electrodes. What mass of nickel is deposited? (Ni = 58.7 g mol⁻¹)

    1. 4.38 g
    2. 1.10 g
    3. 0.55 g
    4. 2.19 g
    Show answer

    Answer: D. Q = 3.0 × 2400 = 7200 C. n(e⁻) = 7200 ÷ 96 500 = 0.0746 mol. Ni²⁺ + 2e⁻ → Ni, so n(Ni) = 0.0373 mol. Mass = 0.0373 × 58.7 = 2.19 g.

  13. 13. What are the products when an aqueous solution of CuSO₄ is electrolysed with platinum electrodes?

    1. Copper at the cathode and O₂ at the anode
    2. H₂ at the cathode and O₂ at the anode
    3. Copper at the cathode and SO₂ at the anode
    4. H₂ at the cathode and the platinum anode dissolves
    Show answer

    Answer: A. At the cathode, Cu²⁺ (E° = +0.34 V) is reduced much more readily than water (−0.83 V), so copper is deposited. Platinum is inert, and at the anode water is oxidised (2H₂O → O₂ + 4H⁺ + 4e⁻) in preference to sulphate ions, so oxygen is evolved and the solution becomes acidic.

  14. 14. Which change happens when a lead storage battery is recharged?

    1. PbO₂ is converted into PbSO₄ at both electrodes
    2. PbSO₄ is converted into Pb at one electrode and PbO₂ at the other, and H₂SO₄ is regenerated
    3. Lead is converted into PbO₂ at the anode
    4. Water is converted into H₂ and O₂ only
    Show answer

    Answer: B. Charging reverses the discharge reaction: 2PbSO₄ + 2H₂O → Pb + PbO₂ + 2H₂SO₄. Lead sulphate becomes lead at the negative plate and lead dioxide at the positive plate, and the acid concentration rises again.

  15. 15. Assertion (A): Iron rusts faster in water that contains dissolved carbon dioxide or other acidic oxides. Reason (R): The cathodic reaction of rusting, O₂ + 4H⁺ + 4e⁻ → 2H₂O, uses hydrogen ions.

    1. Both A and R are true, and R is the correct explanation of A
    2. Both A and R are true, but R is not the correct explanation of A
    3. A is true, but R is false
    4. A is false, but R is true
    Show answer

    Answer: A. Both are true. Dissolved CO₂ forms carbonic acid, supplying H⁺ ions needed for the reduction of oxygen at cathodic spots. More H⁺ speeds up this half-reaction and so the whole corrosion cell. R explains A.

Questions 1-3: lesson 1 (galvanic cells and electrode potentials). Questions 4-6: lesson 2 (Nernst equation, K and ΔG). Questions 7-10: lesson 3 (conductance and Kohlrausch's law). Questions 11-13: lesson 4 (electrolysis and Faraday's laws). Questions 14-15: lesson 5 (batteries and corrosion).

Sign in to keep track of the lessons you finish.

Privacy · Terms · Refunds · Delivery