Revision notes

Chapter 7 Alcohols, Phenols and Ethers: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Classification, nomenclature, structure and physical properties

Classifying alcohols, phenols and ethers

  • By number of –OH groups
    • Monohydric (one –OH)
    • Dihydric (two): ethane-1,2-diol
    • Trihydric (three): propane-1,2,3-triol (glycerol)
  • Alcohols with C(sp³)–OH
    • Primary, secondary, tertiary
    • Allylic: –OH on the sp³ carbon next to C=C
    • Benzylic: –OH on the sp³ carbon next to an aromatic ring
  • C(sp²)–OH
    • Vinylic alcohols: CH₂=CH–OH
    • Phenols: –OH on an aromatic ring
  • Ethers
    • Simple (symmetrical): same groups, C₂H₅OC₂H₅
    • Mixed (unsymmetrical): different groups, C₂H₅OCH₃, C₂H₅OC₆H₅
Common and IUPAC names
CompoundCommon nameIUPAC name
CH₃CH(OH)CH₃Isopropyl alcoholPropan-2-ol
(CH₃)₂CHCH₂OHIsobutyl alcohol2-Methylpropan-1-ol
(CH₃)₃COHtert-Butyl alcohol2-Methylpropan-2-ol
CH₂(OH)CH(OH)CH₂OHGlycerolPropane-1,2,3-triol
CH₃OCH₃Dimethyl etherMethoxymethane
C₂H₅OC₂H₅Diethyl etherEthoxyethane
C₆H₅OCH₃Anisole (methyl phenyl ether)Methoxybenzene
C₆H₅OC₂H₅Phenetole (ethyl phenyl ether)Ethoxybenzene
  • Alcohol: –OH on an sp³ carbon; phenol: –OH on an aromatic carbon; ether: R–O–R′.
  • IUPAC: alkan-ol (lowest locant to –OH); ethers as alkoxyalkanes with the larger group as parent.
  • C–O in phenol (136 pm) is shorter than in methanol (142 pm); ether angle is a little above tetrahedral.
  • Hydrogen bonding gives alcohols high boiling points and water solubility; branching lowers boiling point.
Read the full lesson

Lesson 2

Preparation of alcohols and phenols; methanol and ethanol

Two ways to add water to propene

  • Acid-catalysed hydration
    • Reagents: H₂O, H⁺
    • Markovnikov addition
    • Product: propan-2-ol, CH₃CH(OH)CH₃
    • Goes via a carbocation
  • Hydroboration–oxidation
    • Reagents: (BH₃)₂, then H₂O₂/OH⁻
    • Anti-Markovnikov result
    • Product: propan-1-ol, CH₃CH₂CH₂OH
    • Excellent yield

The cumene process

  1. Cumene, C₆H₅CH(CH₃)₂ Isopropylbenzene.
  2. Oxidation by air (O₂) Cumene hydroperoxide, C₆H₅C(CH₃)₂OOH.
  3. Dilute acid (H⁺, H₂O) Rearranges and splits the hydroperoxide.
  4. Products Phenol, C₆H₅OH, and acetone, CH₃COCH₃.
  • Acid hydration: Markovnikov; hydroboration–oxidation: anti-Markovnikov result.
  • Aldehydes → 1°, ketones → 2° alcohols by reduction; acids → 1° alcohols with LiAlH₄.
  • Grignard: HCHO → 1°, other aldehydes → 2°, ketones → 3° alcohols.
  • Phenol from chlorobenzene, benzenesulphonic acid, diazonium salts or cumene (with acetone).
Read the full lesson

Lesson 3

Reactions of alcohols: acidity, esterification, dehydration and oxidation

pKa values (standard data); the larger the pKa, the weaker the acid
CompoundpKa
2,4,6-Trinitrophenol (picric acid)very low (strong acid)
p-Nitrophenol7.1
o-Nitrophenol7.2
m-Nitrophenol8.3
Phenol10.0
m-Cresol10.1
o-Cresol and p-Cresol10.2
Ethanol15.9

Acid-catalysed dehydration of ethanol

  1. Protonation CH₃CH₂OH + H⁺ → CH₃CH₂OH₂⁺ (fast)
  2. Loss of water CH₃CH₂OH₂⁺ → CH₃CH₂⁺ + H₂O (slow)
  3. Loss of a proton CH₃CH₂⁺ → CH₂=CH₂ + H⁺ (fast)
  • Acidity: phenol ≫ water > alcohols; phenoxide is stabilised by resonance.
  • –NO₂ (especially o/p) increases phenol's acidity; alkyl groups decrease it.
  • Lucas test: 3° immediate turbidity, 1° none at room temperature; dehydration ease 3° > 2° > 1°.
  • 1° → aldehyde (PCC) or acid (KMnO₄); 2° → ketone; 3° resists oxidation; Cu at 573 K dehydrogenates 1° and 2°.
Read the full lesson

Lesson 4

Reactions of phenols: electrophilic substitution, Kolbe and Reimer–Tiemann

Kolbe's reaction and the Reimer–Tiemann reaction

  • Kolbe's reaction
    • Phenol + NaOH → sodium phenoxide
    • Electrophile: CO₂
    • Group introduced: –COOH (ortho)
    • Product after acidification: salicylic acid
  • Reimer–Tiemann reaction
    • Phenol + CHCl₃ + aqueous NaOH
    • Intermediate: substituted benzal chloride
    • Group introduced: –CHO (ortho)
    • Product after acidification: salicylaldehyde
  • –OH strongly activates the ring and directs ortho/para through resonance.
  • Dilute HNO₃ gives o- and p-nitrophenol (o is steam volatile: intramolecular H-bond).
  • Br₂ in CS₂ gives monobromophenols; bromine water gives 2,4,6-tribromophenol (white precipitate).
  • Kolbe: CO₂ → salicylic acid; Reimer–Tiemann: CHCl₃/NaOH → salicylaldehyde; Zn dust → benzene; chromic acid → benzoquinone.
Read the full lesson

Lesson 5

Ethers: preparation, properties and reactions

Ethers boil like alkanes but dissolve like alcohols (standard data)
CompoundMolar mass / g mol⁻¹Boiling point / KSolubility in water
n-Pentane72309.1Essentially immiscible
Ethoxyethane74307.6About 7.5 g per 100 mL
Butan-1-ol74390About 9 g per 100 mL

Which halide forms when a mixed ether is cleaved by HI?

  • Both groups 1° or 2°
    • SN2: I⁻ attacks the less hindered carbon
    • Smaller group → alkyl iodide; larger group → alcohol
  • One group 3°
    • SN1 via the tertiary carbocation
    • Tertiary group → tertiary iodide; other group → alcohol
  • Alkyl aryl ether
    • Alkyl–O bond breaks
    • Products: phenol + alkyl iodide
  • Acid dehydration at 413 K suits symmetrical ethers from primary alcohols; at 443 K alkenes form.
  • Williamson: alkoxide + primary halide (SN2); a tertiary halide gives only an alkene.
  • Ethers boil like alkanes (no self H-bonding) but are about as water-soluble as alcohols.
  • HI cleavage: SN2 → smaller group gives RI; SN1 → tertiary group gives RI; ArOR → ArOH + RI; –OR activates o/p.
Read the full lesson

Privacy · Terms · Refunds · Delivery