• Foundation
  • About 20 min
  • 5 practice questions

Reactions of alcohols: acidity, esterification, dehydration and oxidation

Explain the acidity of alcohols and phenols using pKa values and inductive and resonance effects, and describe esterification, reactions with HX (Lucas test), dehydration with its mechanism and oxidation of 1°, 2° and 3° alcohols.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Show the acidic nature of alcohols and phenols and explain why phenol is far more acidic than ethanol.
  • Explain how –NO₂ and –CH₃ substituents change the acidity of phenol, and use pKa values.
  • Describe esterification, the Lucas test and the mechanism of acid-catalysed dehydration.
  • Predict oxidation products of 1°, 2° and 3° alcohols with different oxidising agents and with hot copper.

Alcohols are versatile: they can act as nucleophiles, when the O–H bond breaks, or, once protonated, as electrophiles, when the C–O bond breaks. Their reactions therefore fall into two groups. Phenols share the O–H reactions but, because of their ring, behave very differently in other ways.

Reactions breaking the O–H bond: acidity

Alcohols and phenols react with active metals (Na, K, Al) to give alkoxides or phenoxides and hydrogen: 2R–OH + 2Na → 2R–ONa + H₂. Phenol also reacts with aqueous NaOH to give sodium phenoxide; alcohols do not. Both are Brönsted acids (proton donors), but to very different extents.

Alcohols are acidic because the O–H bond is polar. Electron-releasing alkyl groups increase the electron density on oxygen and reduce this polarity, so acid strength decreases 1° > 2° > 3°. Alcohols are weaker acids than water: R–O⁻ + H₂O → R–OH + OH⁻ goes forward, so an alkoxide is a stronger base than hydroxide (sodium ethoxide is a stronger base than NaOH). Alcohols can also act as Brönsted bases, because oxygen has lone pairs.

Phenols are much more acidic, for two reasons. (1) The sp² carbon bonded to oxygen is more electronegative, drawing electron density from O and making O–H more polar. (2) In the phenoxide ion, the negative charge is delocalised over the ring by resonance, which stabilises it; in an alkoxide the charge stays on oxygen. Phenol itself has resonance too, but with charge separation, so it is less stabilised than phenoxide, and ionisation is favoured.

pKa values (standard data); the larger the pKa, the weaker the acid
CompoundpKa
2,4,6-Trinitrophenol (picric acid)very low (strong acid)
p-Nitrophenol7.1
o-Nitrophenol7.2
m-Nitrophenol8.3
Phenol10.0
m-Cresol10.1
o-Cresol and p-Cresol10.2
Ethanol15.9

Substituent effects. Electron-withdrawing groups such as –NO₂ increase acidity, especially at ortho and para positions, where they help delocalise the negative charge of the phenoxide ion. A meta nitro group helps less. Electron-releasing alkyl groups (cresols) slightly decrease acidity.

Worked example 1: comparing acid strengths from pKa

(a) How many times more acidic is phenol than ethanol? (b) Estimate the pH of a 0.10 M aqueous phenol solution.
(a) Ka = 10^(−pKa). Ratio = 10^(15.9 − 10.0) = 10^5.9 ≈ 7.9 × 10⁵, nearly a million times.
(b) Ka(phenol) = 1.0 × 10⁻¹⁰. For a weak acid, [H⁺] ≈ √(Ka × c) = √(1.0 × 10⁻¹⁰ × 0.10) = √(1.0 × 10⁻¹¹) = 3.2 × 10⁻⁶ M.
pH = −log(3.2 × 10⁻⁶) = 5.5, only weakly acidic; phenol does not liberate CO₂ from sodium hydrogencarbonate.

Esterification

Alcohols and phenols react with carboxylic acids, acid chlorides and acid anhydrides to give esters. With acids and anhydrides a little concentrated H₂SO₄ is used; the reaction is reversible, so water is removed as it forms. With acid chlorides a base such as pyridine is added to neutralise the HCl and shift the equilibrium forward: R–OH + R′COCl → R′COOR + HCl. Introducing a CH₃CO– group is acetylation; acetylation of salicylic acid gives aspirin, an analgesic, anti-inflammatory and antipyretic drug.

Reactions breaking the C–O bond (alcohols only)

With hydrogen halides: ROH + HX → RX + H₂O. The Lucas test uses concentrated HCl with ZnCl₂ (Lucas reagent). Alcohols dissolve in it, but the alkyl chlorides formed do not, so the solution turns cloudy. Tertiary alcohols turn it cloudy immediately; primary alcohols give no turbidity at room temperature; secondary alcohols are in between. With PBr₃: alcohols give alkyl bromides. (Phenols show C–O cleavage only with zinc dust, lesson 4.)

Dehydration to alkenes with concentrated H₂SO₄ or H₃PO₄, anhydrous ZnCl₂ or alumina. Ethanol needs concentrated H₂SO₄ at 443 K; secondary and tertiary alcohols react under milder conditions. Ease of dehydration: 3° > 2° > 1°.
Mechanism for ethanol: (1) the –OH is protonated to give CH₃CH₂–OH₂⁺; (2) water leaves to form the carbocation CH₃CH₂⁺ (the slowest, rate-determining step); (3) a proton is lost from the neighbouring carbon to give CH₂=CH₂. The acid used in step 1 is regenerated in step 3; ethene is removed as it forms to drive the equilibrium. Tertiary carbocations are the most stable, so tertiary alcohols dehydrate most easily.

Acid-catalysed dehydration of ethanol

  1. Protonation CH₃CH₂OH + H⁺ → CH₃CH₂OH₂⁺ (fast)
  2. Loss of water CH₃CH₂OH₂⁺ → CH₃CH₂⁺ + H₂O (slow)
  3. Loss of a proton CH₃CH₂⁺ → CH₂=CH₂ + H⁺ (fast)

Oxidation

Oxidation forms a C=O bond by removing H from O–H and from the C–H on the same carbon (a dehydrogenation).
• 1° alcohol → aldehyde → carboxylic acid. Strong oxidants such as acidified KMnO₄ go straight to the acid. To stop at the aldehyde, use CrO₃ in anhydrous medium or, better, pyridinium chlorochromate (PCC), a complex of CrO₃ with pyridine and HCl.
• 2° alcohol → ketone, with CrO₃.
• 3° alcohol: no H on the carbinol carbon, so no simple oxidation; strong oxidants at high temperature break C–C bonds and give a mixture of acids with fewer carbons.
• Hot copper (573 K): vapours of 1° and 2° alcohols are dehydrogenated to aldehydes and ketones; 3° alcohols are dehydrated to alkenes.

Worked example 2: identifying an alcohol

An alcohol C₄H₁₀O gives no turbidity with Lucas reagent at room temperature and is oxidised by PCC to an aldehyde. Which isomers fit?

No turbidity → primary alcohol. Primary C₄H₁₀O alcohols: butan-1-ol and 2-methylpropan-1-ol. Both give aldehydes with PCC (butanal and 2-methylpropanal). A further test, such as the boiling point, would tell them apart.

Methanol poisoning. In the body, methanol is oxidised to methanal and then methanoic acid, which can cause blindness and death. Patients are given intravenous diluted ethanol: the enzyme that oxidises the aldehyde is kept busy with ethanol, giving the kidneys time to excrete the methanol.

Key takeaways

  • Acidity: phenol ≫ water > alcohols; phenoxide is stabilised by resonance.
  • –NO₂ (especially o/p) increases phenol's acidity; alkyl groups decrease it.
  • Lucas test: 3° immediate turbidity, 1° none at room temperature; dehydration ease 3° > 2° > 1°.
  • 1° → aldehyde (PCC) or acid (KMnO₄); 2° → ketone; 3° resists oxidation; Cu at 573 K dehydrogenates 1° and 2°.

Check your understanding

  1. 1. Which is the strongest acid?

    1. Phenol
    2. Ethanol
    3. p-Cresol
    4. p-Nitrophenol
    Show answer

    Answer: D. The electron-withdrawing –NO₂ group at the para position delocalises the negative charge of the phenoxide ion, so p-nitrophenol (pKa 7.1) is the strongest. Phenol is 10.0, p-cresol 10.2 and ethanol 15.9.

  2. 2. Phenol reacts with aqueous NaOH but ethanol does not. What does this show?

    1. Ethanol is a stronger acid than phenol
    2. Phenol is a stronger acid than water, while ethanol is weaker
    3. Ethanol is a base only
    4. Phenol is a stronger base than ethanol
    Show answer

    Answer: B. Phenol can give its proton to OH⁻, forming phenoxide and water, so it is a stronger acid than water. Ethanol cannot, because it is a weaker acid than water; ethoxide would take the proton back from water.

  3. 3. An alcohol gives an immediate turbidity with Lucas reagent at room temperature. It is most likely to be:

    1. 2-Methylpropan-2-ol
    2. Butan-1-ol
    3. Methanol
    4. Propan-1-ol
    Show answer

    Answer: A. Tertiary alcohols react fastest with HCl/ZnCl₂ because they form stable tertiary carbocations; the insoluble alkyl chloride makes the solution cloudy at once. 2-Methylpropan-2-ol is the only tertiary alcohol listed.

  4. 4. Which reagent oxidises propan-1-ol to propanal without further oxidation to propanoic acid?

    1. Acidified KMnO₄
    2. Concentrated H₂SO₄ at 443 K
    3. Pyridinium chlorochromate (PCC)
    4. Zinc dust
    Show answer

    Answer: C. PCC is a mild oxidant that converts primary alcohols to aldehydes in good yield. Acidified KMnO₄ oxidises all the way to the carboxylic acid, and hot concentrated H₂SO₄ dehydrates the alcohol.

  5. 5. Assertion (A): Tertiary alcohols are dehydrated more easily than primary alcohols. Reason (R): The rate-determining step of dehydration is the formation of a carbocation, and tertiary carbocations are the most stable.

    1. Both A and R are true, and R is the correct explanation of A
    2. Both A and R are true, but R is not the correct explanation of A
    3. A is true, but R is false
    4. A is false, but R is true
    Show answer

    Answer: A. Both are true. The slow step is loss of water to form the carbocation; the more stable the carbocation, the faster this step. Tertiary carbocations are most stable, so tertiary alcohols dehydrate most easily. R explains A.

Privacy · Terms · Refunds · Delivery