• Foundation
  • About 18 min
  • 5 practice questions

Classification, nomenclature, structure and physical properties

Classify alcohols, phenols and ethers, name them by IUPAC rules, describe the shape and bonding of their functional groups, and explain their boiling points and solubility through hydrogen bonding.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Classify alcohols as mono-, di- or trihydric, 1°, 2°, 3°, allylic, benzylic or vinylic, and ethers as simple or mixed.
  • Give common and IUPAC names of alcohols, phenols and ethers.
  • Explain the bond angles and C–O bond lengths in methanol, phenol and methoxymethane.
  • Explain why alcohols boil much higher than ethers and alkanes of similar molar mass, and why lower alcohols dissolve in water.

The spirit used to polish furniture is mainly ethanol; the sugar we eat, the cotton we wear and the paper we write on are all built from compounds containing –OH groups. Alcohols are the basis of many detergents, phenols of antiseptics and ethers of fragrances. An alcohol has –OH attached to a carbon of an aliphatic system (CH₃OH); a phenol has –OH attached directly to an aromatic ring carbon (C₆H₅OH); an ether has an alkoxy or aryloxy group, R–O– or Ar–O–, in place of a hydrogen (CH₃OCH₃).

Classification

Classifying alcohols, phenols and ethers

  • By number of –OH groups
    • Monohydric (one –OH)
    • Dihydric (two): ethane-1,2-diol
    • Trihydric (three): propane-1,2,3-triol (glycerol)
  • Alcohols with C(sp³)–OH
    • Primary, secondary, tertiary
    • Allylic: –OH on the sp³ carbon next to C=C
    • Benzylic: –OH on the sp³ carbon next to an aromatic ring
  • C(sp²)–OH
    • Vinylic alcohols: CH₂=CH–OH
    • Phenols: –OH on an aromatic ring
  • Ethers
    • Simple (symmetrical): same groups, C₂H₅OC₂H₅
    • Mixed (unsymmetrical): different groups, C₂H₅OCH₃, C₂H₅OC₆H₅

Nomenclature

Alcohols. Common name: alkyl group + 'alcohol' (methyl alcohol). IUPAC: replace the final 'e' of the parent alkane by 'ol', numbering the longest chain from the end nearest the –OH. For polyhydric alcohols keep the 'e' and add di-, tri- before 'ol' with locants: HO–CH₂–CH₂–OH is ethane-1,2-diol. Cyclic alcohols use 'cyclo' with –OH on C1 (cyclohexanol, 2-methylcyclopentanol).
Phenols. 'Phenol' is both the common and IUPAC name. Methylphenols are cresols (o-cresol = 2-methylphenol). The benzenediols are catechol (1,2-), resorcinol (1,3-) and hydroquinone or quinol (1,4-).
Ethers. Common name: the two groups in alphabetical order + 'ether' (ethyl methyl ether; diethyl ether if both are the same). IUPAC: alkoxy- or aryloxy-substituted hydrocarbon, the larger group is the parent: CH₃OCH₂CH₂CH₃ is 1-methoxypropane.

Common and IUPAC names
CompoundCommon nameIUPAC name
CH₃CH(OH)CH₃Isopropyl alcoholPropan-2-ol
(CH₃)₂CHCH₂OHIsobutyl alcohol2-Methylpropan-1-ol
(CH₃)₃COHtert-Butyl alcohol2-Methylpropan-2-ol
CH₂(OH)CH(OH)CH₂OHGlycerolPropane-1,2,3-triol
CH₃OCH₃Dimethyl etherMethoxymethane
C₂H₅OC₂H₅Diethyl etherEthoxyethane
C₆H₅OCH₃Anisole (methyl phenyl ether)Methoxybenzene
C₆H₅OC₂H₅Phenetole (ethyl phenyl ether)Ethoxybenzene

Worked example 1: isomers of C₄H₁₀O

Write the alcohols and ethers with formula C₄H₁₀O and classify the alcohols.

Alcohols (4): butan-1-ol (1°), butan-2-ol (2°), 2-methylpropan-1-ol (1°), 2-methylpropan-2-ol (3°).
Ethers (3): 1-methoxypropane (CH₃OCH₂CH₂CH₃), 2-methoxypropane (CH₃OCH(CH₃)₂) and ethoxyethane (C₂H₅OC₂H₅).
Alcohols and ethers with the same molecular formula are functional group isomers.

Structure of the functional groups

In alcohols, oxygen is sp³ hybridised; its two lone pairs repel the bond pairs, so the C–O–H angle is slightly less than the tetrahedral angle (about 108.9° in methanol). In phenols, the –OH is on an sp² carbon, and the C–O bond (136 pm) is a little shorter than in methanol (142 pm), because (i) the oxygen lone pair is conjugated with the ring, giving partial double bond character, and (ii) the carbon is sp² hybridised. In ethers, the four electron pairs on oxygen are roughly tetrahedral, but the angle is slightly greater than tetrahedral (about 111.7° in methoxymethane) because the two bulky groups repel; the C–O bond (141 pm) is about the same as in alcohols.

Physical properties of alcohols and phenols

Boiling points rise with the number of carbon atoms (stronger van der Waals forces) and fall with branching (less surface area). The –OH group forms intermolecular hydrogen bonds, so alcohols and phenols boil much higher than hydrocarbons, ethers and haloalkanes of similar molar mass. Ethanol (46 g mol⁻¹) boils at 351 K, propane (44 g mol⁻¹) at about 231 K, and methoxymethane (46 g mol⁻¹), which is polar but cannot hydrogen-bond with itself, in between at about 248 K.

Solubility. Alcohols and phenols dissolve in water because they form hydrogen bonds with water molecules. Solubility falls as the hydrophobic alkyl or aryl part grows; the lower alcohols are miscible with water in all proportions.

Worked example 2: ordering boiling points

Arrange in increasing boiling point: butan-1-ol, pentane, ethoxyethane, butan-2-ol.

Pentane (72 g mol⁻¹) and ethoxyethane (74 g mol⁻¹) cannot hydrogen-bond with themselves, so they boil lowest and very close together (309.1 K and 307.6 K). The two alcohols hydrogen-bond; the branched butan-2-ol boils below the straight-chain butan-1-ol (390 K).
Order: ethoxyethane < pentane < butan-2-ol < butan-1-ol.

Key takeaways

  • Alcohol: –OH on an sp³ carbon; phenol: –OH on an aromatic carbon; ether: R–O–R′.
  • IUPAC: alkan-ol (lowest locant to –OH); ethers as alkoxyalkanes with the larger group as parent.
  • C–O in phenol (136 pm) is shorter than in methanol (142 pm); ether angle is a little above tetrahedral.
  • Hydrogen bonding gives alcohols high boiling points and water solubility; branching lowers boiling point.

Check your understanding

  1. 1. What is the IUPAC name of (CH₃)₃COH?

    1. Butan-2-ol
    2. 2-Methylpropan-2-ol
    3. 2-Methylpropan-1-ol
    4. tert-Butanol-1
    Show answer

    Answer: B. The longest chain containing the C–OH carbon has three carbons; the –OH and a methyl are both on C2: 2-methylpropan-2-ol. Its common name is tert-butyl alcohol.

  2. 2. Which of the following is a benzylic alcohol?

    1. C₆H₅OH
    2. C₆H₅CH₂OH
    3. CH₂=CHCH₂OH
    4. CH₂=CHOH
    Show answer

    Answer: B. In a benzylic alcohol the –OH is on an sp³ carbon attached directly to an aromatic ring: C₆H₅CH₂OH. C₆H₅OH is a phenol, CH₂=CHCH₂OH is allylic and CH₂=CHOH is vinylic.

  3. 3. Why does ethanol boil at a much higher temperature than methoxymethane, although both have the formula C₂H₆O?

    1. Ethanol has a higher molar mass
    2. Methoxymethane is non-polar
    3. Ethanol molecules form intermolecular hydrogen bonds; methoxymethane molecules cannot
    4. Ethanol is ionic
    Show answer

    Answer: C. Both have molar mass 46 g mol⁻¹. Ethanol has an O–H bond and forms hydrogen bonds between its molecules, which need extra energy to break. Methoxymethane has no O–H, so only weaker dipole–dipole and van der Waals forces act.

  4. 4. Why is the C–O bond in phenol shorter than in methanol?

    1. Phenol has two oxygen atoms
    2. The oxygen lone pair is conjugated with the ring (partial double bond) and the carbon is sp² hybridised
    3. Phenol forms stronger hydrogen bonds
    4. Methanol is a gas
    Show answer

    Answer: B. Resonance between the oxygen lone pair and the benzene ring gives the C–O bond partial double bond character, and an sp² carbon forms shorter bonds than an sp³ carbon. So C–O is 136 pm in phenol against 142 pm in methanol.

  5. 5. Assertion (A): The boiling points of isomeric alcohols decrease with branching. Reason (R): Branching reduces the surface area of the molecule and so weakens van der Waals forces.

    1. Both A and R are true, and R is the correct explanation of A
    2. Both A and R are true, but R is not the correct explanation of A
    3. A is true, but R is false
    4. A is false, but R is true
    Show answer

    Answer: A. Both are true. A more branched, compact molecule has less surface contact with its neighbours, so van der Waals attractions are weaker and less energy is needed to boil it. R explains A.

Privacy · Terms · Refunds · Delivery