• Foundation
  • About 18 min
  • 5 practice questions

Reactions of phenols: electrophilic substitution, Kolbe and Reimer–Tiemann

Explain why –OH activates the benzene ring and directs ortho/para, and describe nitration, bromination, Kolbe's reaction, the Reimer–Tiemann reaction, reduction by zinc dust and oxidation of phenol.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Explain the activating, ortho/para-directing effect of –OH using resonance.
  • Describe nitration of phenol with dilute and concentrated nitric acid and separate o- and p-nitrophenol.
  • Describe bromination of phenol in CS₂ and with bromine water.
  • Write Kolbe's and Reimer–Tiemann reactions, and reactions with zinc dust and chromic acid.

Benzene needs a catalyst and fairly harsh conditions to react with bromine, but phenol decolourises bromine water instantly and gives a white precipitate. The –OH group makes the ring far more reactive. This lesson explores the reactions that are special to phenols.

Why –OH activates the ring

A lone pair on the oxygen is delocalised into the ring (resonance), placing extra electron density at the ortho and para positions. So the –OH group activates the ring towards electrophilic substitution and directs new groups to ortho and para positions. In phenoxide ion the effect is even stronger, because the oxygen carries a full negative charge.

Nitration

With dilute nitric acid at low temperature (298 K), phenol gives a mixture of o-nitrophenol and p-nitrophenol. They are separated by steam distillation: o-nitrophenol is steam volatile because it forms an intramolecular hydrogen bond (between –OH and the neighbouring –NO₂) and does not associate with other molecules; p-nitrophenol forms intermolecular hydrogen bonds, which associate its molecules and make it much less volatile.

With concentrated nitric acid, phenol gives 2,4,6-trinitrophenol (picric acid), but in poor yield because nitric acid also oxidises the ring. Picric acid is now made by first treating phenol with concentrated H₂SO₄ to give phenol-2,4-disulphonic acid, and then with concentrated HNO₃, which replaces the sulphonic acid groups and adds the third nitro group. With three electron-withdrawing –NO₂ groups, picric acid is a strong acid.

Halogenation

  • In a solvent of low polarity (CHCl₃ or CS₂) at low temperature: phenol + Br₂ gives monobromophenols, mainly p-bromophenol with some o-bromophenol. No Lewis acid such as FeBr₃ is needed, because the –OH group itself polarises the bromine molecule.
  • With bromine water: phenol gives a white precipitate of 2,4,6-tribromophenol at once. In water, phenol is partly ionised to the even more reactive phenoxide, so all three ortho and para positions are substituted.

Worked example 1: mass of precipitate with bromine water

4.7 g of phenol (94 g mol⁻¹) is treated with excess bromine water. What mass of 2,4,6-tribromophenol (C₆H₂Br₃OH, 331 g mol⁻¹) forms, and how much bromine is used?

C₆H₅OH + 3Br₂ → C₆H₂Br₃OH + 3HBr.
n(phenol) = 4.7 ÷ 94 = 0.050 mol → n(tribromophenol) = 0.050 mol.
Mass = 0.050 × 331 = 16.55 g (about 16.6 g).
Bromine used = 3 × 0.050 = 0.15 mol (0.15 × 160 = 24 g).

Kolbe's reaction

Phenol is first treated with sodium hydroxide to form sodium phenoxide. The phenoxide ion is so reactive that even carbon dioxide, a weak electrophile, attacks the ring (under pressure and heating). Acidification then gives ortho-hydroxybenzoic acid (salicylic acid) as the main product. Salicylic acid is the starting material for aspirin.

Reimer–Tiemann reaction

Phenol is heated with chloroform and aqueous sodium hydroxide. A –CHCl₂ group is introduced at the ortho position (a substituted benzal chloride), which the alkali hydrolyses to –CHO. Acidification gives salicylaldehyde (2-hydroxybenzaldehyde).

Kolbe's reaction and the Reimer–Tiemann reaction

  • Kolbe's reaction
    • Phenol + NaOH → sodium phenoxide
    • Electrophile: CO₂
    • Group introduced: –COOH (ortho)
    • Product after acidification: salicylic acid
  • Reimer–Tiemann reaction
    • Phenol + CHCl₃ + aqueous NaOH
    • Intermediate: substituted benzal chloride
    • Group introduced: –CHO (ortho)
    • Product after acidification: salicylaldehyde

Other reactions of phenol

  • With zinc dust: heating phenol with zinc dust removes the oxygen: C₆H₅OH + Zn → C₆H₆ + ZnO. This is the one case of C–O cleavage in phenols.
  • Oxidation: chromic acid oxidises phenol to benzoquinone, a conjugated diketone. In air, phenols slowly darken to coloured mixtures containing quinones.

Worked example 2: predicting products

Give the main product of each reaction of phenol: (a) dilute HNO₃ at 298 K, (b) Br₂ in CS₂ at low temperature, (c) NaOH, then CO₂ under pressure, then H⁺, (d) CHCl₃ and aqueous NaOH, then H⁺, (e) zinc dust on heating.
(a) o- and p-nitrophenol; (b) mainly p-bromophenol; (c) salicylic acid; (d) salicylaldehyde; (e) benzene.
Directing effects together: in 3-methylphenol both –OH and –CH₃ direct ortho/para; the stronger activator, –OH, mainly decides where the new group goes (its ortho and para positions).

Key takeaways

  • –OH strongly activates the ring and directs ortho/para through resonance.
  • Dilute HNO₃ gives o- and p-nitrophenol (o is steam volatile: intramolecular H-bond).
  • Br₂ in CS₂ gives monobromophenols; bromine water gives 2,4,6-tribromophenol (white precipitate).
  • Kolbe: CO₂ → salicylic acid; Reimer–Tiemann: CHCl₃/NaOH → salicylaldehyde; Zn dust → benzene; chromic acid → benzoquinone.

Check your understanding

  1. 1. Why is o-nitrophenol steam volatile while p-nitrophenol is not?

    1. o-Nitrophenol has a lower molar mass
    2. o-Nitrophenol has intramolecular hydrogen bonding, while p-nitrophenol molecules associate through intermolecular hydrogen bonds
    3. p-Nitrophenol is ionic
    4. o-Nitrophenol does not contain an –OH group
    Show answer

    Answer: B. Both have the same molar mass. In o-nitrophenol the –OH bonds to the neighbouring –NO₂ within the same molecule, so molecules do not stick together and it distils with steam. p-Nitrophenol molecules hydrogen-bond to one another, raising the boiling point.

  2. 2. What is formed when phenol is treated with bromine water?

    1. o-Bromophenol only
    2. p-Bromophenol only
    3. 2,4,6-Tribromophenol as a white precipitate
    4. Bromobenzene
    Show answer

    Answer: C. In water, phenol is partly converted to the very reactive phenoxide ion, and all three activated positions (two ortho, one para) are brominated, giving a white precipitate of 2,4,6-tribromophenol.

  3. 3. Which reaction converts phenol into salicylaldehyde?

    1. Kolbe's reaction
    2. Williamson synthesis
    3. Heating with zinc dust
    4. Reimer–Tiemann reaction
    Show answer

    Answer: D. Phenol with chloroform and aqueous NaOH introduces –CHCl₂ at the ortho position, which is hydrolysed to –CHO: the Reimer–Tiemann reaction. Kolbe's reaction gives salicylic acid instead.

  4. 4. How many moles of Br₂ react with 0.020 mol of phenol in bromine water, and what mass of 2,4,6-tribromophenol (331 g mol⁻¹) forms?

    1. 0.060 mol and 6.62 g
    2. 0.020 mol and 6.62 g
    3. 0.060 mol and 2.21 g
    4. 0.040 mol and 13.2 g
    Show answer

    Answer: A. C₆H₅OH + 3Br₂ → C₆H₂Br₃OH + 3HBr. Br₂ = 3 × 0.020 = 0.060 mol. Product = 0.020 mol × 331 = 6.62 g.

  5. 5. Assertion (A): Phenol reacts with bromine even without a Lewis acid catalyst. Reason (R): The –OH group strongly activates the benzene ring and itself polarises the bromine molecule.

    1. Both A and R are true, and R is the correct explanation of A
    2. Both A and R are true, but R is not the correct explanation of A
    3. A is true, but R is false
    4. A is false, but R is true
    Show answer

    Answer: A. Both are true. Benzene needs FeBr₃ to polarise Br₂, but the electron-rich ring of phenol is reactive enough to polarise bromine on its own and react. R explains A.

Privacy · Terms · Refunds · Delivery