- Foundation
- About 18 min
- 5 practice questions
Ethers: preparation, properties and reactions
Prepare ethers by acid dehydration of alcohols and by Williamson synthesis, explaining the limits of each, compare their physical properties with alcohols and alkanes, and describe cleavage by HI and electrophilic substitution of anisole.
If something looks wrong, please tell us.
By the end of this lesson you can
- Prepare symmetrical ethers by acid dehydration at 413 K and explain why it suits only primary alcohols.
- Design a Williamson synthesis, choosing the halide and alkoxide so that substitution beats elimination.
- Explain why ethers boil like alkanes but dissolve like alcohols.
- Predict the products of cleaving ethers with HI (SN2 and SN1 cases, and anisole) and of electrophilic substitution of anisole.
Diethyl ether was once the classic inhalation anaesthetic (now replaced because of its slow action and unpleasant recovery), and ethers remain important solvents. Ethers are the least reactive of the oxygen-containing functional groups, which makes them good solvents, yet they can be broken under the right conditions. This lesson covers how they are made, how they behave and how they react.
Preparation by dehydration of alcohols
Protic acids dehydrate alcohols, and the product depends on the conditions. Ethanol with concentrated H₂SO₄ gives ethene at 443 K but mainly ethoxyethane at 413 K: 2C₂H₅OH → C₂H₅OC₂H₅ + H₂O. Ether formation is a bimolecular nucleophilic substitution (SN2): one alcohol molecule attacks a protonated alcohol molecule, water leaves, and a proton is lost.
Limits: the method suits ethers with unhindered primary alkyl groups at low temperature. With secondary and tertiary alcohols, elimination wins and alkenes form. It also gives only symmetrical ethers well: two different alcohols would give a mixture of three ethers.
Williamson synthesis
An important laboratory method for both symmetrical and unsymmetrical ethers: an alkyl halide reacts with a sodium alkoxide (or phenoxide): R–X + R′–O⁻Na⁺ → R–O–R′ + NaX. It is an SN2 attack of the alkoxide on the alkyl halide, so the alkyl halide should be primary. Alkoxides are strong bases as well as nucleophiles; with secondary and especially tertiary halides, elimination competes, and a tertiary halide gives only an alkene. For example, CH₃ONa with (CH₃)₃CBr gives only 2-methylpropene. The bulky group should therefore come from the alkoxide, not the halide.
Worked example 1: choosing the right Williamson route
Plan a synthesis of tert-butyl methyl ether, (CH₃)₃C–O–CH₃.
Route A: (CH₃)₃C–Br + CH₃ONa → mainly 2-methylpropene by elimination. Not suitable.
Route B: (CH₃)₃C–ONa + CH₃–Br → (CH₃)₃C–O–CH₃ by SN2 on the unhindered methyl carbon. Suitable.
Rule: put the tertiary (bulky) group on the oxygen and use a primary or methyl halide. For an aryl alkyl ether such as anisole, use sodium phenoxide + CH₃Br; bromobenzene + CH₃ONa does not work because aryl halides resist SN2.
Worked example 2: Williamson yield
0.20 mol of sodium ethoxide reacts completely with excess bromomethane. What mass of methoxyethane (CH₃OC₂H₅, 60 g mol⁻¹) forms at most?
C₂H₅ONa + CH₃Br → C₂H₅OCH₃ + NaBr (1 : 1). n(ether) = 0.20 mol. Mass = 0.20 × 60 = 12 g.
Physical properties
The C–O bonds are polar, so ethers have a small net dipole moment, but this hardly affects boiling points. Ethers boil close to alkanes of similar molar mass and far below alcohols, because they cannot hydrogen-bond with one another. Their solubility in water, however, resembles that of alcohols of similar molar mass, because the ether oxygen can accept hydrogen bonds from water.
| Compound | Molar mass / g mol⁻¹ | Boiling point / K | Solubility in water |
|---|---|---|---|
| n-Pentane | 72 | 309.1 | Essentially immiscible |
| Ethoxyethane | 74 | 307.6 | About 7.5 g per 100 mL |
| Butan-1-ol | 74 | 390 | About 9 g per 100 mL |
Chemical reactions
Cleavage of the C–O bond. Ethers react only under drastic conditions, with excess concentrated HI or HBr at high temperature (reactivity HI > HBr > HCl). A dialkyl ether gives two molecules of alkyl halide with excess acid: R–O–R + 2HI → 2R–I + H₂O.
Mechanism with HI: (1) the ether oxygen is protonated to an oxonium ion; (2) iodide, a good nucleophile, attacks and displaces an alcohol molecule; (3) with excess HI the alcohol is converted to a second alkyl iodide.
- Primary or secondary groups (SN2): iodide attacks the less hindered carbon, so the smaller alkyl group becomes the alkyl iodide: CH₃–O–C₂H₅ + HI → CH₃I + C₂H₅OH.
- A tertiary group (SN1): the protonated ether loses an alcohol to form the stable tertiary carbocation, which picks up iodide, so the tertiary group becomes the halide: (CH₃)₃C–O–CH₃ + HI → (CH₃)₃C–I + CH₃OH.
- Alkyl aryl ethers: the aryl–O bond is stronger (sp² carbon, partial double bond), so the alkyl–O bond breaks: C₆H₅–O–CH₃ + HI → C₆H₅OH + CH₃I. Phenol is not converted further, because its sp² carbon does not undergo nucleophilic substitution.
Which halide forms when a mixed ether is cleaved by HI?
-
Both groups 1° or 2°
- SN2: I⁻ attacks the less hindered carbon
- Smaller group → alkyl iodide; larger group → alcohol
-
One group 3°
- SN1 via the tertiary carbocation
- Tertiary group → tertiary iodide; other group → alcohol
-
Alkyl aryl ether
- Alkyl–O bond breaks
- Products: phenol + alkyl iodide
Electrophilic substitution in aryl ethers. Like –OH, the alkoxy group activates the ring and directs ortho/para.
• Bromination: anisole reacts with Br₂ in ethanoic acid even without FeBr₃, giving mainly p-bromoanisole (about 90%) with some o-bromoanisole.
• Friedel–Crafts: with CH₃Cl or CH₃COCl and anhydrous AlCl₃, anisole gives o- and p-methylanisole or o- and p-methoxyacetophenone (para major).
• Nitration: with concentrated HNO₃ and H₂SO₄, a mixture of o- and p-nitroanisole.
Key takeaways
- Acid dehydration at 413 K suits symmetrical ethers from primary alcohols; at 443 K alkenes form.
- Williamson: alkoxide + primary halide (SN2); a tertiary halide gives only an alkene.
- Ethers boil like alkanes (no self H-bonding) but are about as water-soluble as alcohols.
- HI cleavage: SN2 → smaller group gives RI; SN1 → tertiary group gives RI; ArOR → ArOH + RI; –OR activates o/p.
Check your understanding
-
1. Which pair of reagents is best for preparing ethyl tert-butyl ether by Williamson synthesis?
- (CH₃)₃CBr + C₂H₅ONa
- (CH₃)₃CONa + C₂H₅Br
- (CH₃)₃COH + C₂H₅OH with conc. H₂SO₄
- (CH₃)₃CBr + C₂H₅Br with Na
Show answer
Answer: B. The alkoxide must carry the bulky tertiary group and the halide should be primary, so SN2 can occur. (CH₃)₃CBr with an alkoxide undergoes elimination to 2-methylpropene, and acid dehydration of a tertiary alcohol also gives an alkene.
-
2. What are the products when methoxybenzene (anisole) is heated with HI?
- Iodobenzene and methanol
- Benzene and methyl iodide
- Phenol and methyl iodide
- Iodobenzene and methyl iodide
Show answer
Answer: C. The aryl–O bond has partial double bond character and is strong, so I⁻ attacks the methyl carbon of the protonated ether, breaking the CH₃–O bond: C₆H₅OCH₃ + HI → C₆H₅OH + CH₃I.
-
3. What are the products when (CH₃)₃C–O–CH₃ is heated with HI?
- (CH₃)₃C–OH and CH₃I
- (CH₃)₃C–I and CH₃OH
- (CH₃)₂C=CH₂ and CH₃I
- (CH₃)₃CH and CH₃OI
Show answer
Answer: B. With a tertiary group, the protonated ether loses methanol to form the stable tertiary carbocation (SN1), which combines with I⁻. So the tertiary group becomes (CH₃)₃C–I and the methyl group leaves as CH₃OH.
-
4. Why is ethoxyethane about as soluble in water as butan-1-ol, although its boiling point is much lower?
- Ethoxyethane is ionic
- Ethoxyethane has a higher molar mass
- The ether oxygen can accept hydrogen bonds from water, though ether molecules cannot hydrogen-bond with each other
- Butan-1-ol does not form hydrogen bonds
Show answer
Answer: C. Solubility depends on hydrogen bonding with water, which an ether oxygen can accept. Boiling point depends on attractions between the compound's own molecules, and ether molecules have no O–H to hydrogen-bond with each other, so they boil like alkanes.
-
5. Assertion (A): The reaction of sodium methoxide with tert-butyl bromide gives 2-methylpropene rather than an ether. Reason (R): Alkoxide ions are strong bases as well as nucleophiles, and the tertiary carbon is too hindered for SN2 attack.
- Both A and R are true, and R is the correct explanation of A
- Both A and R are true, but R is not the correct explanation of A
- A is true, but R is false
- A is false, but R is true
Show answer
Answer: A. Both are true. The crowded tertiary carbon blocks SN2 attack, so the alkoxide acts as a base, removing a β-hydrogen and causing elimination to 2-methylpropene. R explains A.
Sign in to keep track of the lessons you finish.