- Foundation
- About 20 min
- 5 practice questions
Preparation of alcohols and phenols; methanol and ethanol
Prepare alcohols by hydration and hydroboration–oxidation of alkenes, reduction of carbonyl compounds and acids, and Grignard reagents; prepare phenols from haloarenes, sulphonic acids, diazonium salts and cumene; describe the manufacture and properties of methanol and ethanol.
If something looks wrong, please tell us.
By the end of this lesson you can
- Predict the alcohol formed by acid-catalysed hydration (Markovnikov) and hydroboration–oxidation (anti-Markovnikov).
- Choose reducing agents to make 1° or 2° alcohols from aldehydes, ketones, acids and esters.
- Choose the Grignard reagent and carbonyl compound needed for a given 1°, 2° or 3° alcohol.
- Describe four routes to phenol and the production of methanol and ethanol, including fermentation.
Alcohols are the workhorses of organic synthesis, and chemists have many ways to make them, each giving a different kind of alcohol from the same starting material. Phenol, once isolated from coal tar, is now made on a huge scale from cumene. This lesson collects the main methods.
Alcohols from alkenes
Acid-catalysed hydration. An alkene adds water in the presence of an acid catalyst; with unsymmetrical alkenes the addition follows Markovnikov's rule: CH₃CH=CH₂ + H₂O (H⁺) → CH₃CH(OH)CH₃.
Mechanism: (1) the alkene is protonated by H₃O⁺, forming the more stable carbocation; (2) water attacks the carbocation as a nucleophile; (3) the protonated alcohol loses H⁺ to give the alcohol.
Hydroboration–oxidation (H. C. Brown, 1959). Diborane (BH₃)₂ adds to the alkene to give a trialkylborane, which is oxidised by H₂O₂ in aqueous NaOH. Boron attaches to the doubly bonded carbon with more hydrogens, so the –OH ends up there: the product looks like water added opposite to Markovnikov's rule, in excellent yield. CH₃CH=CH₂ → CH₃CH₂CH₂OH (propan-1-ol).
Two ways to add water to propene
-
Acid-catalysed hydration
- Reagents: H₂O, H⁺
- Markovnikov addition
- Product: propan-2-ol, CH₃CH(OH)CH₃
- Goes via a carbocation
-
Hydroboration–oxidation
- Reagents: (BH₃)₂, then H₂O₂/OH⁻
- Anti-Markovnikov result
- Product: propan-1-ol, CH₃CH₂CH₂OH
- Excellent yield
Alcohols from carbonyl compounds and acids
- Aldehydes → 1° alcohols, ketones → 2° alcohols, by catalytic hydrogenation (finely divided Pt, Pd or Ni) or with NaBH₄ or LiAlH₄. RCHO → RCH₂OH; RCOR′ → RCH(OH)R′.
- Carboxylic acids → 1° alcohols with the strong reducing agent LiAlH₄ (then water): RCOOH → RCH₂OH. LiAlH₄ is expensive, so industry first converts the acid to an ester and then hydrogenates it catalytically.
Alcohols from Grignard reagents
A Grignard reagent RMgX adds to the C=O group of an aldehyde or ketone (nucleophilic addition) to give an adduct, which is hydrolysed by dilute acid to an alcohol. Methanal gives a 1° alcohol, other aldehydes give 2° alcohols, and ketones give 3° alcohols.
Worked example 1: planning a Grignard synthesis
Which carbonyl compound and Grignard reagent give (a) propan-1-ol, (b) butan-2-ol, (c) 2-methylpropan-2-ol?
(a) A 1° alcohol with one more carbon than the Grignard group: C₂H₅MgBr + HCHO → CH₃CH₂CH₂OH.
(b) A 2° alcohol: CH₃MgBr + CH₃CH₂CHO (propanal) → CH₃CH(OH)CH₂CH₃ (or C₂H₅MgBr + CH₃CHO).
(c) A 3° alcohol: CH₃MgBr + CH₃COCH₃ (propanone) → (CH₃)₃COH.
Preparation of phenols
- From haloarenes: chlorobenzene is fused with NaOH at 623 K under high pressure to give sodium phenoxide; acidification gives phenol.
- From benzenesulphonic acid: benzene is sulphonated with oleum; the sulphonic acid is heated with molten NaOH to give sodium phenoxide; acidification gives phenol.
- From diazonium salts: aniline with nitrous acid (NaNO₂ + HCl) at 273–278 K gives benzenediazonium chloride, which is hydrolysed to phenol by warming with water or dilute acid (N₂ is evolved).
- From cumene (industrial): cumene (isopropylbenzene) is oxidised by air to cumene hydroperoxide, which dilute acid splits into phenol and acetone. Most of the world's phenol is made this way, and large amounts of acetone are obtained as a by-product.
The cumene process
- Cumene, C₆H₅CH(CH₃)₂ Isopropylbenzene.
- Oxidation by air (O₂) Cumene hydroperoxide, C₆H₅C(CH₃)₂OOH.
- Dilute acid (H⁺, H₂O) Rearranges and splits the hydroperoxide.
- Products Phenol, C₆H₅OH, and acetone, CH₃COCH₃.
Commercially important alcohols
Methanol, CH₃OH ('wood spirit'), was once made by destructive distillation of wood. Today it is made by catalytic hydrogenation of carbon monoxide at high pressure and temperature over a ZnO–Cr₂O₃ catalyst: CO + 2H₂ → CH₃OH. It is a colourless liquid boiling at 337 K and is highly poisonous: small amounts can cause blindness and larger amounts death. In the body it is oxidised to methanal and then methanoic acid. It is used as a solvent for paints and varnishes and mainly to make formaldehyde.
Ethanol, C₂H₅OH, is made commercially by fermentation of sugars, the oldest method. Sucrose (from molasses, sugarcane or fruits such as grapes) is converted by the enzyme invertase into glucose and fructose (both C₆H₁₂O₆), which the enzyme zymase from yeast ferments to ethanol and CO₂: C₆H₁₂O₆ → 2C₂H₅OH + 2CO₂. Fermentation is anaerobic; zymase stops working once ethanol exceeds about 14%, and if air gets in, ethanol is oxidised to ethanoic acid, spoiling the taste. Ethanol boils at 351 K. Commercial alcohol is made unfit to drink (denatured) by adding copper sulphate (colour) and pyridine (foul smell). Large amounts are also made by hydration of ethene.
Worked example 2: ethanol from glucose
What mass of ethanol and what amount of CO₂ can 90 g of glucose (180 g mol⁻¹) give by complete fermentation? (C₂H₅OH = 46 g mol⁻¹)
n(glucose) = 90 ÷ 180 = 0.50 mol.
C₆H₁₂O₆ → 2C₂H₅OH + 2CO₂, so n(ethanol) = 1.0 mol and n(CO₂) = 1.0 mol.
Mass of ethanol = 1.0 × 46 = 46 g; CO₂ = 1.0 mol (44 g).
Key takeaways
- Acid hydration: Markovnikov; hydroboration–oxidation: anti-Markovnikov result.
- Aldehydes → 1°, ketones → 2° alcohols by reduction; acids → 1° alcohols with LiAlH₄.
- Grignard: HCHO → 1°, other aldehydes → 2°, ketones → 3° alcohols.
- Phenol from chlorobenzene, benzenesulphonic acid, diazonium salts or cumene (with acetone).
Check your understanding
-
1. Which reagent sequence converts propene into propan-1-ol?
- H₂O with dilute H₂SO₄
- (BH₃)₂, then H₂O₂ in aqueous NaOH
- HBr, then aqueous KOH
- KMnO₄
Show answer
Answer: B. Hydroboration puts boron on the CH₂ end (the carbon with more hydrogens) and oxidation replaces it by –OH, giving propan-1-ol. Acid-catalysed hydration follows Markovnikov's rule and gives propan-2-ol.
-
2. Which combination gives a tertiary alcohol after hydrolysis?
- CH₃MgBr + HCHO
- CH₃MgBr + CH₃CHO
- CH₃MgBr + CH₃COCH₃
- CH₃MgBr + CO₂
Show answer
Answer: C. A ketone has two alkyl groups on the carbonyl carbon; adding a third from the Grignard reagent gives a tertiary alcohol. CH₃MgBr + propanone → 2-methylpropan-2-ol. Methanal gives a 1° and ethanal a 2° alcohol.
-
3. What are the products of the cumene process?
- Phenol and acetone
- Phenol and ethanol
- Benzene and acetone
- Phenol and methanol
Show answer
Answer: A. Cumene is oxidised by air to cumene hydroperoxide, which is split by dilute acid into phenol and acetone (propanone).
-
4. How much ethanol can 360 g of glucose (180 g mol⁻¹) give on complete fermentation? (C₂H₅OH = 46 g mol⁻¹)
- 92 g
- 46 g
- 368 g
- 184 g
Show answer
Answer: D. n(glucose) = 360 ÷ 180 = 2.0 mol. Each mole gives 2 mol of ethanol, so 4.0 mol of ethanol = 4.0 × 46 = 184 g.
-
5. Assertion (A): Fermentation of sugar solutions cannot produce more than about 14% ethanol. Reason (R): The enzyme zymase is inhibited once the ethanol concentration exceeds about 14%.
- Both A and R are true, and R is the correct explanation of A
- Both A and R are true, but R is not the correct explanation of A
- A is true, but R is false
- A is false, but R is true
Show answer
Answer: A. Both are true. As ethanol accumulates, it stops the yeast enzyme zymase from working, so fermentation halts at about 14% alcohol. R explains A.
Sign in to keep track of the lessons you finish.